1 July 2020 in IEEE Transactions on Microwave Theory and Techniques
This article reviews the state-of-the-art millimeter-wave (mm-wave) power amplifiers (PAs), focusing on broadband design techniques. An overview of the main solid-state technologies is provided, including Si, gallium arsenide (GaAs), GaN, and other III-V materials, and both field-effect and bipolar transistors. The most popular broadband design techniques are introduced, before critically comparing through the most relevant design examples found in the scientific literature. Given the wide breadth of applications that are foreseen to exploit the mm-wave spectrum, this contribution will represent a valuable guide for designers who need a single reference before adventuring in the challenging task of the mm-wave PA design.
10 May 2019 in IEEE Journal of Solid-State Circuits
This paper presents the first 28-/37-/39-GHz linear Doherty power amplifier (PA) in silicon for broadband fifth-generation (5G) applications. We introduce a new transformer-based on-chip Doherty power combiner that can reduce the impedance transformation ratio (ITR) in power back-off (PBO) and, thus, improve the bandwidth and power-combining efficiency. We also devise a ``driver-PA co-design'' method that creates power-dependent uneven feeding in the Doherty PA and enhances the Doherty operation without any hardware overhead or bandwidth compromise. For the proof of concept, we implement a 28-/37-/39-GHz PA fully integrated in a standard 130-nm SiGe BiCMOS process, which occupies 1.8 mm². The PA achieves a 52% -3-dB small-signal S₂₁ bandwidth and a 40% -1-dB large-signal saturated output power (Psat) bandwidth. At 28/37/39 GHz, the PA achieves +16.8-/+17.1-/+17-dBm Psat, +15.2-/+15.5-/+15.4-dBm P1,dB, and superior 1.72/1.92/1.62 times efficiency enhancement over class-B operation at 5.9-/6-/6.7-dB PBO. Moreover, the PA demonstrates multi-gigabit-per-second data rates with excellent efficiency and linearity for 64-quadrature amplitude modulation (64-QAM) in three millimeter-wave (mm-wave) 5G bands. This PA advances the state of the art for Doherty, wideband, and 5G silicon PAs in mm-wave bands. It supports drop-in upgrade for current PAs in existing mm-wave systems and opens doors to compact system solutions for future multiband 5G massive multiple-input multiple-output (MIMO) and phased-array platforms.
16 November 2017 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a millimeter-wave fully differential transformer-based passive reflection-type phase shifter (RTPS) capable of performing full span 360° continuous phase shift from 58 to 64 GHz. It consists of two transformer-based 90° couplers and two transformer-based multi-resonance reflective loads to provide 360° phase shift with low loss and ultra-compact chip size. Our proof-of-concept design is implemented in a standard 130-nm BiCMOS process with a core area of 480 μm x 340 μm. It achieves a wide phase shifting range of 367° and a low insertion loss IL (3.7 dB < | IL| < 10.2 dB) at 62 GHz and maintains a full span 360° phase shifting range from 58 to 64 GHz. Moreover, it supports 360° phase shifting with a constant IL, i.e., | IL| =10, 11, 12 dB, at an IL variation of less than 0.74 dB at 62 GHz. To the best of our knowledge, this design achieves a first-ever full span 360° phase shifting (up to 367°), the lowest IL, the smallest IL variation, and the best figure-of-merit of 37.1°/dB among reported 60 GHz fully integrated RTPS in silicon.
22 January 2019 in IEEE Transactions on Antennas and Propagation
This paper presents the theoretical and experimental results of a new approach for multi-target vital-signs monitoring using an electromagnetic-based Doppler radar. A phased-array radar is designed and implemented using a hybrid beamforming architecture to generate two simultaneous beams. The proposed system significantly mitigates the phase collision problem in the presence of multiple targets. Comprehensive discussions on the theory of multi-beam systems alongside detailed simulations are provided. For the purpose of demonstration, a prototype dual-beam phased-array continuous-wave Doppler radar have been designed and implemented at 2.4 GHz. The system is fully characterized, and the measurement results confirm the feasibility of the proposed method. Experimental measurements show that for the first time, the breathing rates of two individuals can be monitored at the same time and using the same frequency. Several practical aspects of the system are examined and a pilot study on the subject tracking is presented. The proposed dual-beam system prevents the phase collision of the signatures of the targets and hence provides multi-person detection capability to the system.
22 June 2021 in IEEE Journal of Solid-State Circuits
This article presents a broadband power amplifier (PA) with a distributed-balun output network that provides the PA optimum load impedance over a wide bandwidth. The proposed output network comprises two coupled-line sections and absorbs the device output capacitance. It employs a scalable coupled-line modeling approach that captures both the magnetic (inductive) and electric (capacitive) couplings between windings with fewer parameters and supports a rapid design process. Closed-form design solutions, design space limitations, bandwidth limits, and design tradeoffs are derived and analyzed comprehensively. Its extension to differential output and common-mode response is also discussed in detail. As a proof of concept, a prototype PA is implemented for multiband fifth-generation (5G) applications in 45-nm SOI CMOS. With no biasing retuning or network reconfiguration, the PA consistently achieves >19.1 dBm P sat , >37.3% peak power-added efficiency (PAE), 17.8-19.6 dBm P 1dB , and 36.6%-44.3% PAE P1dB over 24-40 GHz, verifying the truly wideband large-signal matching. The PA demonstrates 5G new radio (NR) frequency range 2 (FR2) modulation signals over 24-42 GHz, covering n257/n258/n260 5G bands. For 5G NR FR2 800-MHz 2-CC 64-QAM signals (11.78-dB PAPR), the PA achieves 11.3-dBm/16.6% average P out /PAE with -25.1-dB rms EVM at 28-GHz and 10.2-dBm/13.6% average P out /PAE with -25.1-dB rms EVM at 37 GHz.
1 January 2020 in IEEE Journal of Solid-State Circuits
This article presents an extremely broadband 24.5-43.5 GHz receiver (RX) achieving 32-56-dB instantaneous full-band image rejection (IR), which supports multiple major mm-Wave 5G bands at 24.5/28/37/39/43 GHz. A compact transformer-based I/Q network (0.14 mm²) is proposed to generate high-precision LO I/Q signals at millimeter-wave (mm-Wave) and provide built-in load impedance up-transformation for passive voltage amplification, boosting the LO swing for a higher RX conversion gain (CG). The high-quality differential I/Q generation is measured with phase/amplitude variation less than ±1.8°/±0.15 dB over an instantaneous wide bandwidth of 25-50 GHz without any calibration or switching/tunable elements. The RX is measured with a peak 35.2-dB CG and 18-dB gain tuning to accommodate complex EM environments. The RX modulation tests successfully demonstrate receiving 18-Gb/s 64-QAM and 14.4-Gb/s 256-QAM signals. In addition, the RX is tested with concurrent injection of a desired signal and an image, while the image uses the same wideband modulation scheme and data rate as the desired signal. The RX successfully rejects the wideband images and receives the desired signals of 12-Gb/s 64-QAM with -27.6-dB EVM and 8-Gb/s 256-QAM with -33.47-dB EVM. To the best of our knowledge, this article presents the first CMOS RX front end that covers 24.5-43.5-GHz mm-Wave 5G bands and supports instantaneous full-band IR with no calibration, switching/tuning elements, or external controls, enabling future wideband low-latency 5G MIMOs.