Babatunde A. Koiki

Babatunde A. Koiki

Auto-generated profile, based on publicly available information

Babatunde A. Koiki

Department of Chemical Sciences, University of Johannesburg, Johannesburg 2028, South Africa

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
ONOluchi Nkwachukwu
Oluchi Nkwachukwu
CMCharles Muzenda
Charles Muzenda
BOBabatope O. Ojo
Babatope O. Ojo
BZBusisiwe Zwane
Busisiwe Zwane
BKBabatunde A. Koiki
Babatunde A. Koiki
Omotayo ArotibaOmotayo Arotiba
Omotayo Arotiba
Towards nonconventional wastewater treatment methods for the degradation of organic pollutants in wastewater, a perovskite-based photoelectrochemical system was developed. Bismuth ferrite doped with lanthanum (La-BiFeO3, La-BFO) perovskite was synthesised through a hydrothermal method with low calcination temperature for the photoelectrochemical degradation of orange II dye and other cocktails of dyes. Photoanodes were prepared by the deposition of the perovskites on a fluorine-doped tin oxide (FTO) substrate. The photoanodes were characterised using XRD, FESEM, FTIR and UV-vis diffuse reflectance. The photoelectrochemical properties of the synthesised photoanodes were investigated with chronoamperometry and electrochemical impedance spectroscopy (including Mott–Schottky analysis). The results show that all La3+-doped BFO photoanodes exhibited a higher absorption edge in the visible light region than the undoped BFO. The photocurrent response of 10% La-BFO (the best performing electrode) exhibited a three times higher current response than the pure BFO. In addition, the electrode exhibited a good degradation efficiency of 84.2% within 120 min with applied bias potential of 2 V at a pH of 7. EIS studies showed a significant enhancement of the interfacial electron transfer of the charge carriers. The enhancements in electrode performances were attributed to the synergistic effect of the applied bias potential and the introduction of La3+ into the BFO matrix. This study therefore shows that the photoelectrocatalytic performance of BFO for water treatment can be improved by the introduction of perovskites-doping ions such as La3+.

6 October 2021 in Water
Verified
Journal Article
Open access
PDF file
BZBusisiwe Zwane
Busisiwe Zwane
BOBenjamin Olawale
Benjamin Olawale
BKBabatunde A. Koiki
Babatunde A. Koiki
Nonhlangabezo MABUBANonhlangabezo MABUBA
Nonhlangabezo MABUBA
CGChaimaa Gomri
Chaimaa Gomri
Omotayo ArotibaOmotayo Arotiba
Omotayo Arotiba
The mineralization of tetracycline by electrochemical advanced oxidation processes (EAOPs) as well as the study of the toxicity of its intermediates and degradation products are presented. Electro-Fenton (EF), anodic oxidation (AO), and electro-Fenton coupled with anodic oxidation (EF/AO) were used to degrade tetracycline on carbon felt (cathode) and a sub-stoichiometric titanium oxide (Ti4O7) layer deposited on Ti (anode). As compared to EF and AO, the coupled EF/AO system resulted in the highest pollutant removal efficiencies: total organic carbon removal was 69 ± 1% and 68 ± 1%, at 20 ppm and 50 ppm of initial concentration of tetracycline, respectively. The effect of electrolysis current on removal efficiency, mineralization current efficiency, energy consumption, and solution toxicity of tetracycline mineralization were investigated for 20 ppm and 50 ppm tetracycline. The EF/AO process using a Ti4O7 anode and CF cathode provides low energy and high removal efficiency of tetracycline caused by the production of hydroxyl radicals both at the surface of the non-active Ti4O7 electrode and in solution by the electro-Fenton process at the cathodic carbon felt. Complete removal of tetracycline was observed from HPLC data after 30 min at optimized conditions of 120 mA and 210 mA for 20 ppm and 50 ppm tetracycline concentrations. Degradation products were elucidated, and the toxicity of the products were measured with luminescence using Microtox® bacteria toxicity test.

19 July 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
NMNondumiso Mahhumane
Nondumiso Mahhumane
LCLeskey Mduduzi Cele
Leskey Mduduzi Cele
CMCharles Muzenda
Charles Muzenda
ONOluchi Nkwachukwu
Oluchi Nkwachukwu
BKBabatunde A. Koiki
Babatunde A. Koiki
Omotayo ArotibaOmotayo Arotiba
Omotayo Arotiba
In this study, a ternary z-scheme heterojunction of Bi2WO6 with carbon nanoparticles and TiO2 nanotube arrays was used to remove paracetamol from water by photoelectrocatalysis. The materials and z-scheme electrode were characterised using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), EDS mapping, ultraviolet diffuse reflection spectroscopy (UV-DRS), photocurrent measurement, electrochemical impedance spectroscopy (EIS), uv-vis spectroscopy and total organic carbon measurement (TOC). The effect of parameters such as current density and pH were studied. At optimal conditions, the electrode was applied for photoelectrocatalytic degradation of paracetamol, which gave a degradation efficiency of 84% within 180 min. The total organic carbon removal percentage obtained when using this electrode was 72%. Scavenger studies revealed that the holes played a crucial role during the photoelectrocatalytic degradation of paracetamol. The electrode showed high stability and reusability therefore suggesting that the z-scheme Bi2WO6-CNP-TiO2 nanotube arrays electrode is an efficient photoanode for the degradation of pharmaceuticals in wastewater.

5 September 2018 in International Journal of Chemical Reactor Engineering
Verified
Journal Article
Closed access
PDF file
EAElisha A. Adeniji
Elisha A. Adeniji
TATemitope Olabisi Abodunirn
Temitope Olabisi Abodunirn
TOTemitope A. Ogunnupebi
Temitope A. Ogunnupebi
BKBabatunde A. Koiki
Babatunde A. Koiki
AOAbimbola M. Olatunde
Abimbola M. Olatunde
MOMartins O. Omorogie
Martins O. Omorogie
This research enthusiastically highlights the bio-adsorption of methylene blue (MB) by local, poultry, NaOH and citric acid modified ubiquitous eggshell (LES, NLES, CLES, PES, NPES and CPES) adsorbents. The microstructures of these adsorbents indicated that they had some surface functional moieties that were responsible for the adsorption of MB. The Langmuir isotherm and PSO model best fit the experiment data. The largest Langmuir monolayer adsorption capacity q m a x ${q_{max}}$ , was 242.47 mg/g, with the largest MB initial concentration of 400 mg/L. This was a clear indication and a confirmation that MB adsorption by the powdered eggshells was chemisorptive. Moreover, the values of F $F$ , the thickness of the boundary layer/film were > 0 $\gt 0$ , showing that the rate limiting step for the adsorption process was controlled by more than one diffusion mechanism. The values of Δ G ∘ $\Delta {G^\circ }$ for the adsorption of MB by the adsorbents indicated that the adsorption reactions were all non-feasible and non-spontaneous. The values for Δ S ∘ $\Delta {S^\circ }$ (J/K/mol) for LES, NLES and CPES for the uptake of MB showed decrease in the chaos or degree of randomness of the adsorption reactions, and the reverse was the case for PES, NPES and CLES for the uptake of MB, which showed increase in the chaos or degree of randomness of the adsorption. The adsorption of MB by LES, NLES and CPES gave Δ H ∘ $\Delta {H^\circ }$ (kJ/mol) values which were indicative of endothermic nature of the adsorption systems, and the reverse was the case for the uptake of MB by PES, NPES and CLES, which was indicative of the exothermic nature of the adsorption systems.

18 May 2026 in RSC Advances
Verified
Journal Article
Open access
PDF file
BKBabatunde A. Koiki
Babatunde A. Koiki
KJKehinde D. Jayeola
Kehinde D. Jayeola
DSDimpo S. Sipuka
Dimpo S. Sipuka
TSTsholofelo I. Sebokolodi
Tsholofelo I. Sebokolodi
DCDonggen Chen
Donggen Chen
Omotayo ArotibaOmotayo Arotiba
Omotayo Arotiba
PEC oxidation: a promising, efficient, energy saving, and sustainable technology for the removal of sulfonamide antibiotics from wastewater.