26 May 2016 in Optics Letters
In this Letter, we demonstrate a graphene mode-locked, all-fiber Ho-doped fiber laser generating 1.3 nJ energy pulses directly from the oscillator. The graphene used as a saturable absorber was obtained via chemical vapor deposition on copper substrate and immersed in a poly(methyl methacrylate) support. The laser generated ultrashort soliton pulses at 2080 nm with bandwidth up to 6.1 nm. The influence of the output coupling ratio and the SA modulation depth on the mode-locking performance was also investigated.
28 January 2011 in Optics Express
A compact upconversion fiber laser operating around 810 nm is proposed using thulium-doped silica-based fiber with locally modified thulium environment by high alumina codoping. Using a comprehensive numerical model of thulium doped fiber we investigate performance of the proposed laser. Comparison with two other thulium hosts, fluoride glass and standard silica, is presented. Efficient lasing can be expected even for silica based fiber for specific ranges of the fiber and laser cavity parameters, especially when 3H4 lifetime is enhanced. With moderate pump power of 5 W at wavelength of 1064 nm, the predicted output power of the upconversion laser is about 2 W at 810 nm.
15 February 2017 in Optics Express
Self-sweeping of laser wavelength corresponding to holmium emission near 2100 nm is reported. The sweeping occurred in ~4 nm interval with rate ~0.7 nm/s from longer towards shorter wavelengths. Origins of the selection of the sweeping direction are discussed. The laser wavelength drift with time was registered by Fourier transform infrared spectrometer. To our knowledge it is the first observation of self-swept fiber laser beyond 2000 nm.
5 April 2016 in Current Nanoscience
We present a review on recent progress in the research and development of nanoparticlecontaining optical fibers for high-power fiber lasers, amplifiers, and ASE sources. Attention has been focused on rare-earth-doped silica fibers with nanoparticles in the core. Progress in materials, technologies, characterization techniques, and achievements has been summarized. Materials of active fibers based on yttrium-aluminium silicates, mullite, protoenstatite, and phosphates doped with Er3+, Yb 3+, Eu3+, and Tm3+ have been reviewed. The material research in this field has been systematically investigated by research groups from ORC Southampton, CGCRI Kolkata, LPMC Nice together with CNR-IOM-OGG Grenoble, nLIGHT (formerly Liekki), and IPE Prague since 2007. The best slope efficiency achieved with Yb –doped nanoparticle-containing fiber was in the range of 70-80 %.
11 September 2019 in IEEE Photonics Journal
Efficient holmium fiber lasers have been studied as attractive laser sources operating around 2.1 μm. We report on holmium-doped silica fibers prepared by the modified chemical vapor deposition in combination with either a solution-doping method or a nanoparticle-doping method. A set of 15 fibers with various compositions was characterized and compared with respect to their fluorescence lifetime, laser slope efficiency and laser threshold. This set of fibers in wide concentration ranges allowed us to assess reliably the influence of material composition and the influence of doping method. The best-performance fibers exhibited slope efficiency 83.1%, laser threshold 155 mW and a record value of upper laser level lifetime of 1.35 ms. These results were achieved in fibers with holmium concentration lower than 800 molar ppm and Al/Ho molar ratio greater than 70. Significant differences between fibers prepared by solution doping and nanoparticle doping were not observed. The behavior of $\text{Al}_2 \text{O}_3$ nanoparticles during fiber preparation is discussed in details.