1 December 2017 in Archives of Metallurgy and Materials
The most recent and promising trends in development of renewable sources of energy are Combined Heat and Power (CHP) systems. The newest solutions from this field are hybrid compact solar panels. The correct operation of both systems, i.e. the photovoltaic panel and the heat exchanger requires an effective connection between the two. The adhesives utilized to interconnect above elements should provide a stable and hermetic joint able to withstand mechanical and thermal impacts of the surrounding environment factors. The paper presents the research results over the impact of the type and the amount of reinforcing phase on the physical and mechanical properties of epoxy resin matrix composites reinforced with particles of non-ferrous metals (Ag, Cu, W, Al), dedicated as adhesives for connections between photovoltaic panels and heat exchangers. Based on the experimental findings the usefulness of classical analytic models for valuation of polymer-metal composites properties was validated.
15 February 2016 in Key Engineering Materials
Twin roll casting (TRC) technology is becoming increasingly popular because of the opportunity to receive aluminum strips which may serve as input for direct cold rolling processes. Furthermore, these strips have a favourable combination of mechanical and electric properties as well as dimensional tolerances. TRC line strips show segregation of alloying elements and structure providing a combination of casting structure and wrought alloy. As part of this study, the structure of the strips from the TRC line has been analyzed as well as the segregation of the alloying elements.
1 June 2016 in Archives of Metallurgy and Materials
Twin Roll Casting technology belongs to modern, integrated method of processing aluminum and its alloys. This method includes preparation of liquid metal and its continuous casting between the rotating cylindrical crystallizers, optional homogenizing treatment, cold rolling and optional interoperation or final heat treatment. Final products of TRC method are strips with a thickness from few to several millimeters, which can be directly subjected to cold rolling process to afford a sheet. Properties of final product are limited by the material’s condition, its chemical composition and also selected path of its processing technology. The paper presents research results of chemical composition and mechanical properties of strips obtained in Twin Roll Casting processing line.
15 February 2016 in Key Engineering Materials
Modern power industry expects new, dedicated aluminum based alloys with non-standard properties, including increased resistance to temperature. Materials exhibiting higher thermal resistance allow to increase operating temperature of electrical conductors, which results in the increase of their current carrying capacity. Commonly known and used in such applications are alloys from the AlZr group. Despite their advantages scientists from around the world are searching for new alternatives. In this paper authors present research results on Al-Mo and Al-Ag alloys with particular interest to the analysis of the molybdenum addition to the aluminum in the amount of 0.05, 0.1, 0.2% and silver addition in the amount of 0.05, 0.1, 0.15% by mass on the mechanical and electrical properties of obtained alloys. Tests were also carried out for reference material which is high-purity aluminum and the AlZr alloy, both in the as cast state temper. Results showed a significant change of temperature coefficient of resistance in Al-Ag alloys compared to Al, which leads to possible increase of the Joule’a heat without the raise of conductors temperature limit. On the other hand, above-average heat resistance of alloys from the Al-Mo group of materials was achieved during the trials. On that basis authors state that Al-Ag alloys may be used for the production of ACSS conductors and Al-Mo alloys for TACSR or TACIR type of conductors.This study was performed under a project financed by NCBiR within the INNOTECH II program.
30 March 2021 in Acta Innovations
New materials used in various industries require sufficiently high mechanical properties, fine-grained structure and ease of metal forming while minimizing production costs. For this reason, work is being carried out to develop new groups of alloys that make it possible to increase the strength of the obtained components while reducing their weight, and thus reducing production costs. This article focuses on two aluminium-based alloys with different content of alloying additives: copper and magnesium i.e., AlCu3Mg3 and AlCu4.5Mg6, which were produced by metallurgical synthesis. The as-cast alloys were characterized for their basic physical, mechanical and electrical properties and were subjected to structural analysis. In the next stage, the alloys were modified with 100, 500, 1000 and 2000 ppm of titanium and then their hardness, electrical conductivity and density were tested. Samples were also subjected to microstructural analysis. The obtained results allowed to examine the evolution of the AlCuMg alloy properties depending on the content of alloy additives and the amount of used modifier.
30 March 2023 in Journal of Casting & Materials Engineering
The latest research work in the field of electric power systems focuses on the development of new wire materials which will allow the increase of the transmission capacity of power lines currently in use. The reason for this research was the often limited possibilities of continuous and failure-free transmission of electricity. In this paper, the authors present research on a new aluminium-based alloy dedicated for use as a conductive braid in the HTLS cable group. There are many technical solutions for this group of cables on the market, although they are solutions with a number of disadvantages, ranging from their high price, various operational shortcomings, complicated installation techniques, and ending with the risk of monopolistic practices, which is related to the inability to attract several competitive suppliers. The main aim of the research was to develop a new alloy based on aluminium with the addition of silver and molybdenum dedicated for use in special overhead power cables. Experimental research on new materials focused on obtaining the necessary knowledge to produce an overhead wire from these alloys with higher current carrying capacity in relation to the currently used conventional wire materials based on aluminium.