Currently, there is a worldwide search for new forms of materials with properties that are significantly improved in comparison to materials currently in use. One promising research direction lies in the synthesis of metals containing modern carbon materials (e.g., graphene, nanotubes). In this article, the research results of metallurgical synthesis of a mixture of copper and two different kinds of carbon (activated carbon and multiwall carbon nanotubes) are shown. Samples of copper–carbon nanocomposite were synthesized by simultaneously exposing molten copper to an electrical current while vigorously stirring and adding carbon while under an inert gas atmosphere. The article contains research results of density, hardness, electrical conductivity, structure (TEM), and carbon decomposition (SIMS method) for the obtained materials.

The continuous industrial development that occurs worldwide generates the need to develop new materials with increasingly higher functional properties. This need also applies to the basic material for electricity purposes, which is copper. In this article, we carry out studies on the influence of various alloying elements such as Mg, In, Si, Nb, Hf, Sb, Ni, Al, Fe, Zr, Cr, Zn, P, Ag, Sc, Pb, Sn, Co, Ti, Mn, Te and Bi on the electrical and mechanical properties of ETP-grade copper. The research involves producing copper alloys using the gravity die casting method with alloy additions of 0.1 wt.%, 0.3 wt.% and 0.5 wt.%. All resulting materials are cold-worked to produce wires, which are subsequently homogenized and annealed. The materials produced in this manner undergo testing to determine their specific electrical conductivity, tensile strength, yield strength, elongation and Vickers hardness (HV10 scale).

Intensive research is underway worldwide to develop new conductive materials for applications in the power industry. Such tests aim to increase the electrical conductivity of materials for conductors and cables, thus increasing the current carrying capacity of the line and reducing the loss of electricity transmission. The scientific discovery of recent years, graphene, one of the allotropic types of carbon with very high electrical and thermal conductivity and mechanical strength, creates great opportunities for designing and producing new materials with above-standard operational properties. This project concentrates on developing technology for manufacturing aluminum-graphene and copper-graphene composites intended to be used to produce a new generation of power engineering conductors. In particular, we present the results of the research on the mechanical synthesis of aluminum-graphene and copper -graphene composites, as well as the results of the electric, mechanical, and structural properties of rods obtained after the extrusion process and wires after the drawing process.

Today’s world is a place where lack of electrical energy would be unimaginable for most of society. All the conductors in the world, both aluminum and copper, have their origin in various types of casting lines where the liquid metal after crystallization is being processed into the form of wires and microwires. However, the efficiency of the continuous casting processes of metals and the final quality of the manufactured product strictly depend on the design of the used crystallizers, the materials used during its production and its quality. Research conducted in this paper focuses on the latter, i.e., external surface quality of the graphite crystallizer at the place of contact with the primary cooling system. In order to quantify its influence on the continuous casting process numerical analyses using the finite element method has been conducted, which results have been further confirmed during empirical tests in laboratory conditions. It has been proven with all of the proposed methods that the temperature of the obtained cast rod is closely linked to the aforementioned surface quality, as when its roughness coefficient surpasses a certain value the temperature of the obtained product increases almost twofold from approx. 150–170 °C to 300–320 °C. These values might influence the quality and final properties of the cast rod, the susceptibility to wire drawing process and possible formation of wire drawing defects and therefore be of much importance to the casting and processing industry.

The wire drawing process is commonly perceived as one of the best studied metal forming processes in almost every aspect; however, when considering elastic deformation, researchers usually focus on the uniaxial tensile forces after the material exits the drawing die and not the elastic deformation region before entering the drawing die, even though it may have a significant impact on the strength parameters and the nature of metal flow inside the drawing die. The aim of this research is to theoretically and experimentally identify the deformation in the elastic region and to further link the shape of this region and the values of stress occurring in it with the geometrical parameters of the drawing process and assess its impact on its strength parameters. In order to achieve the assumed goals, numerical analyses using the finite element method and experimental research on the drawing process in laboratory conditions were carried out using Vickers hardness tests and resistance strain gauges measuring deformation in stationary and non-stationary conditions. The obtained results indicate that the shape and the extent of the region of elastic deformations generated in the material before the plastic deformation region during the drawing process depends on the applied deformation coefficient and stationarity of the process.

New materials used in various industries require sufficiently high mechanical properties, fine-grained structure and ease of metal forming while minimizing production costs. For this reason, work is being carried out to develop new groups of alloys that make it possible to increase the strength of the obtained components while reducing their weight, and thus reducing production costs. This article focuses on two aluminium-based alloys with different content of alloying additives: copper and magnesium i.e., AlCu3Mg3 and AlCu4.5Mg6, which were produced by metallurgical synthesis. The as-cast alloys were characterized for their basic physical, mechanical and electrical properties and were subjected to structural analysis. In the next stage, the alloys were modified with 100, 500, 1000 and 2000 ppm of titanium and then their hardness, electrical conductivity and density were tested. Samples were also subjected to microstructural analysis. The obtained results allowed to examine the evolution of the AlCuMg alloy properties depending on the content of alloy additives and the amount of used modifier.