20 July 2023 in IEEE Transactions on Instrumentation and Measurement
Positioning systems are widely used to determine the location of objects or individuals in a given environment. In underground mines, these systems are used to track the location of miners and equipment and ensure that they operate in safe and efficient areas. It allows mine operators to monitor the whereabouts of personnel and equipment and to respond quickly to emergencies. Additionally, accurate positioning information can optimize mining operations, improve equipment utilization, and reduce costs. Global positioning systems are not suitable for the underground environment. The ultra-high frequency (UHF) based systems are also unsuitable due to extreme attenuation. The non-radio-frequency (non-RF) techniques are preferred for underground mining due to their relatively small attenuation and interference caused by the surrounding rock and mineral formations in an underground mine that can occur with radio frequency (RF) signals. This allows for more accurate and reliable positioning within the mine. This research paper compares non-RF techniques, such as magnetic induction, visible light, and acoustic, for positioning within an underground mine. The study evaluates each technique’s accuracy, reliability, and feasibility and discusses their potential for use in underground mining environments. Overall, the study highlights the importance of considering multiple positioning options to optimize the safety and productivity of underground mining operations.
22 August 2023 in IEEE Sensors Letters
Developing positioning systems for the underground environment is challenging, particularly if radio-frequency based techniques are used. Low-frequency Magnetic-Induction (MI) based positioning systems are accurate both in indoor and underground environments as the relative magnetic permeability of most of the materials in such environments is close to unity. However, the positioning range of the MI-based systems is limited because of the attenuation of the artificially generated quasi-static field with distance. An incrementally deployed network using transmitters can be used to increase the positioning range. However, the complexity of the system increases as the number of transmitters increases. Moreover, identifying the contribution of each particular transmitter to the received signal becomes challenging. In this paper, we present a magnetic-induction positioning system using a dual-multiplexing technique. The proposed system combines both time-division multiplexing (TDM) and frequency-division multiplexing (FDM) for efficient positioning. We developed a proof-of-concept prototype to validate the proposed system. The experimental results show that the proposed system is able to estimate the 3-D position with an error of less than $\pm$ 0.05 m within a measurement field of size 1 × 1 ×.45 m in X, Y, and Z (width × length × depth). The proposed dual-multiplexing approach allows for increasing the positioning range by incrementally deploying the transmitters.
27 April 2026 in IEEE Internet of Things Journal
Precise monitoring of the location of miners in underground mines is essential for ensuring safety, particularly during emergencies. Low-frequency magnetic induction (MI) provides a reliable and robust solution for ranging and positioning in underground environments due to robustness against dust, humidity, and line-of-sight (LoS) obstructions. Usually, a high resonant frequency is desirable for miniaturized MI systems to achieve long-range positioning; notably, it increases the complexity of the electronic system. Moreover, the present MI-based system provides the positioning, not the identity, of the miner. This paper introduces a multi-frequency miner identification and MI-based wearable 2D positioning system designed for underground mining environments. It introduces a novel approach, utilizing uniaxial portable mobile transmitter coils attached to helmets of miners, alongside biaxial stationary receiving coils placed at fixed locations within the mine. Additionally, a modulation-based miner identification system assigns a unique modulating frequency to each miner, whereas the resonance frequency serves as the carrier frequency. Moreover, this technique combines received signal strength (RSS) from orthogonally placed biaxial receiver coils to determine the position of the miner with an accuracy of 97.63%, maintaining an average Euclidean error of 4.48 cm in the test area of 4.6×4.6 m2 with the developed algorithm. It also achieves a resolution of 10 cm in radial distance and 15◦ in angular orientation with respect to the observation point.