This article aims to carry out experiments on water absorption by husked red rice at constant temperatures of 28, 40, and 50 °C. The description of the absorption kinetics and the analyses of the water distribution and volumetric expansion of each grain, at a given instant, were carried out using a diffusion model. In order for the model to be as close as possible to the real physical situation, the mesh necessary to numerically solve the diffusion equation was generated from the photograph of a grain. Thus, the diffusion equation was written in Boundary-Fitted Coordinates (BFCs). The solution of the diffusion equation written in generalized coordinates was then discretized in space and time, using the Finite Volume method, with a fully implicit formulation, considering the variable volume and variable mass diffusivity as functions of the local moisture content. Optimizations based on the Levenberg–Marquardt algorithm make it possible to determine the parameters of an exponential function relating mass diffusivity and the local moisture content for each temperature. Statistical indicators (chi-square, determination coefficient, and Student’s t-test) allowed us to conclude that the proposed model was very satisfactory for all temperatures, making it possible to simulate the water absorption, water distribution, and volumetric expansion of the grain over time.
1 November 2019 in Revista Brasileira de Engenharia Agrícola E Ambiental
Passion fruit has the peel (albedo and flavedo) as its major component and it can be used in the production of flour as source of nutrients and enrichment of food products. Thus, this study aimed to evaluate the production of flours from passion fruit albedo and whole peel, verifying the influences of flavedo removal and maceration, as well as the variation in drying temperature (70 and 80 °C) on the physical and chemical characteristics of the flours. The flours has a light color with slight trend to red and stronger trend to yellow. Moisture content is within the limits established by the current norms of ANVISA (a maximum of 15%). The flavedo removal contributed to the increase of water, crude fiber, neutral detergent fiber and acid detergent fiber concentrations. However, it reduced moisture, ash, protein, lipids and carbohydrates concentrations. On the other hand, the maceration decreases luminosity, lipids and carbohydrates and increases the chromaticity a* and b* and moisture in the flours. In relation to the increase in temperature, a decrease was observed in the protein concentration and an increase in the concentration of ash and lipids. Based on centesimal composition, the flour should be prepared with whole peel without maceration and dried at 80 °C.
The objective of this study was to carry out a study on continuous and intermittent drying (intermittency ratio α = 2/3) of osmotically pretreated melon pieces, cut in the form of a parallelepiped. An osmotic dehydration pretreatment was performed using an incubator with mechanical shaking. Drying processes were carried out using an oven with forced air circulation at temperatures of 50 and 70 °C. The data were modeled by means of empirical equations, in order to compare the drying kinetics and analyze the impact of the intermittent process on energy savings and preservation of bioactive compounds in the final product. The experiments were also described using a diffusion model in Cartesian coordinates, with a third-kind boundary condition, in order to analyze the moisture distribution inside each piece of fruit over time. Among the empirical equations analyzed, Page’s was the one that best described the continuous and intermittent drying of osmotically pretreated melon pieces. In order to obtain dried melon, intermittent drying significantly reduced the effective processing time and, consequently, energy consumption, preserving the bioactive compounds more intensely (particularly at a temperature of 50 °C), compared to continuous drying. The diffusion model adequately described all the drying experiments, and it was found that the effective mass diffusivity increased significantly with the application of intermittency.
The aim of this study was to determine the thermophysical properties and process parameters of cylindrical carrot pieces during their chilling. For this, the temperature of the central point of the product, initially at 19.9 °C, was recorded during chilling under natural convection, with the refrigerator air temperature maintained at 3.5 °C. A solver was created for the two-dimensional analytical solution of the heat conduction equation in cylindrical coordinates. This solver and the experimental data set were coupled to the LS Optimizer (V. 7.2) optimization software to simultaneously determine not only the values of thermal diffusivity (α) and heat transfer coefficient (), but also the uncertainties of these values. These values were consistent with those reported in the literature for carrots; in this study, the precision of these values and the confidence level of the results (95.4%) were also presented. Furthermore, the Biot numbers were greater than 0.1 and less than 40, indicating that the mathematical model presented in this study can be used to simultaneously estimate α and . A simulation of the chilling kinetics using the values obtained for α and showed good agreement with the experimental results, with a root mean square error RMSE = 9.651 × 10−3 and a chi-square χ2 = 4.378 × 10−3.
This article aims to carry out experiments on water absorption by husked red rice, at constant temperatures of 28, 40 and 50 °C. The description of the absorption kinetics, as well as the analyses of water distribution and volumetric expansion of each grain, at a given instant, was done using a diffusion model. In order for the model to be as close as possible to the real physical situation, the mesh necessary to numerically solve the diffusion equation was generated from the photograph of a grain. Thus, the diffusion equation was written in Boundary-Fitted Coordinates (BFC). The solution of the diffusion equation written in generalized coordinates was then discretized in space and time, using the Finite Volume method, with a fully implicit formulation, considering variable volume and also variable mass diffusivity as a function of local moisture content. Optimizations based on Levenberg-Marquardt algorithm make it possible to determine the parameters of an exponential function relating mass diffusivity and the local moisture content for each temperature. Statistical indicators (chi-square, determination coefficient and Student’s t-test) allowed concluding that the model proposed was very satisfactory for all temperatures, making it possible to simulate water absorption, water distribution and volumetric expansion of the grain over time.
The umbu tree (Spondias tuberosa) belongs to the Anacardiaceae family and is part of the plant biodiversity of Brazilian biomes, such as the Caatinga. Some research related to the nutritional aspects of the pulp of this fruit is found in the literature. On the other hand, studies related to the drying of the seed of this fruit are still rare. Since drying is generally the first step before flour production, which will allow extraction of its nutrients, this work proposes a detailed description of this step. For this purpose, two solutions are proposed (analytical and numerical) for the diffusion equation in cylindrical coordinates, with boundary conditions of the third kind. For the analytical solution, three parameters were considered: the effective constant mass diffusivity (), the convective mass transfer coefficient for the north and south interfaces of the cylinder (), and the convective mass transfer coefficient for the east and west interfaces of the cylinder (). For the numerical solution, the effective diffusivity was considered as a function of the local moisture content (), the convective mass transfer coefficient was assumed to be equal for all interfaces (), and shrinkage was incorporated into the model. The convective mass transfer coefficients obtained through analytical solution show a greater convective effect at the top of the cylinder representing the seeds. Through the results obtained by the numerical solution it can be assumed that due to the heterogeneity of products such as umbu seeds, shrinkage can also be influenced by changes in sample porosity during processing.