27 February 2009 in Optics Letters
We demonstrate a precision frequency measurement using a phase-stabilized optical fiber link over a physical distance of . The transition frequency of the optical lattice clock at the University of Tokyo is measured to be referenced to international atomic time. The results demonstrate the excellent functions of the intercity optical fiber link and the great potential of optical lattice clocks for use in the redefinition of the second.
7 October 2019 in IEEE Journal of Solid-State Circuits
This article introduces a chip-scale ultralow-power atomic clock (ULPAC) in the microwave frequency region. A new suspended quantum package architecture along with a fully integrated frequency probing and locking loop implemented in CMOS technology results in a compact package and ultralow-power consumption. In addition, dedicated low-noise magnetic field and temperature control loops are incorporated for isolating and mitigating the internal and external factors affecting the frequency stability. The output frequency of a crystal oscillator is continuously compensated and stabilized by locking to the peak of a coherent population trapping signal, thereby inheriting the superior frequency stability of the atomic resonance. The proposed ULPAC system achieves a frequency stability of 2.2 x 10⁻¹² at an averaging time of 10⁵ s, while consuming 59.9 mW. The frequency probing and locking circuits implemented in a standard 65-nm CMOS process node occupy an area of 2.55 mm². The prototype of this atomic clock occupies a volume of 15 cm³.
15 November 2015 in Journal of the Physical Society of Japan
We performed an absolute frequency measurement of the 1S0–3P0 transition in 87Sr with a fractional uncertainty of 1.2 × 10−15, which is less than one-third that of our previous measurement. A caesium fountain atomic clock was used as a transfer oscillator to reduce the uncertainty of the link between a strontium optical lattice clock and the SI second. The absolute value of the transition frequency is 429 228 004 229 873.56(49) Hz.
9 March 2020 in Applied Physics Letters
We propose a model to reduce the influence that the light-shift induced frequency drift has on the long-term stability of coherent population trapping (CPT)-based low-power atomic clocks. We experimentally validated the proposed model using the chip-scale atomic clock architecture. The model considers both the drift of the dc-bias current to compensate for the wavelength aging of the vertical-cavity surface-emitting laser (VCSEL) and the variation in the modulation index of the light field generated by the VCSEL. We investigated the dc-bias-current-dependency of the frequency drift in an atomic clock module both theoretically and experimentally, confirming that the frequency drift can change as a function of the VCSEL basic parameters. When the atomic clock module was operated over a period of five months at the dc-bias current affording a zero-crossing of the clock frequency drift, the Allan standard deviation and clock frequency drift for long-term stability were for averaging times of s and /day, respectively. Our approach is promising to improve the long-term stability of CPT-based low-power atomic clocks.
14 March 2002 in Physical Review A
An atomic polarizing white-color interferometer composed of the wave packets in the and states of the excited state of Ca, has been developed using a thermal atomic beam excited by a pair of two resonant lights at two separate zones under a homogeneous magnetic field. The interferometer generated the Ramsey fringes as a detuning of the rf frequency between two resonant lights from the Zeeman-frequency shift, while it generates white-color interference fringes as a detuning of laser frequency. The interferometer was used for the direct and short-time measurement of the Aharonov-Casher phase by removing the main part of dc Stark phase shift and without the influence of the frequency fluctuation of a laser. The measured dependence of the Aharonov-Casher phase on the electric field agreed with the predicted one within a relative uncertainty of 2.9%. The tensor polarizability in the state was determined to be from the frequency shift between the and states.
27 August 2014 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
The frequency stability of an atomic fountain clock was significantly improved by employing an ultra-stable local oscillator and increasing the number of atoms detected after the Ramsey interrogation, resulting in a measured Allan deviation of 8.3 × 10 -14τ-1/2 . A cryogenic sapphire oscillator using an ultra-low-vibration pulse-tube cryocooler and cryostat, without the need for refilling with liquid helium, was applied as a local oscillator and a frequency reference. High atom number was achieved by the high power of the cooling laser beams and optical pumping to the Zeeman sublevel mF = 0 employed for a frequency measurement, although vapor-loaded optical molasses with the simple (001) configuration was used for the atomic fountain clock. The resulting stability is not limited by the Dick effect as it is when a BVA quartz oscillator is used as the local oscillator. The stability reached the quantum projection noise limit to within 11%. Using a combination of a cryocooled sapphire oscillator and techniques to enhance the atom number, the frequency stability of any atomic fountain clock, already established as primary frequency standard, may be improved without opening its vacuum chamber.