In this study, we propose an approach to relieve the mechanical stress in the gate stack of top-tier devices during the monolithic 3D (M3D) integration process. In the M3D process, selective laser annealing process has been actively adopted for the fabrication of top-tier devices in order to avoid possible adverse effects on pre-existing bottom-tier devices. However, the perpendicular irradiation direction during the laser annealing generates a vertical thermal gradient across the gate stack of top-tier MOS devices, resulting in unavoidable mechanical stress that is detrimental to device performance. In this work, we have demonstrated that inserting an Al2O3 layer in between the TiN gate electrode and the HfO2 gate dielectric can reduce the mechanical stress in the gate stack. This approach can reduce the residual mechanical stress in the gate stack by approximately 67%, resulting in a ~ 49% reduction in interface state density (Dit) and a ~ 20% improvement in carrier mobility.
In this work, a NiO/β-Ga2O3 heterojunction diode with an ultrathin (∼2 nm) amorphous boron nitride (a-BN) interfacial layer (IL) is presented. The NiO/a-BN/β-Ga2O3 heterojunction diode exhibited a lower turn-on voltage and a higher forward current, thereby reducing the power dissipation, compared to the NiO/β-Ga2O3 diode without an a-BN IL. It is also found that the a-BN IL reduces the interface states, leading to the improvement of the operational reliability after bias stress and reverse blocking characteristics.
18 March 2026 in IEEE Transactions on Electron Devices
This work introduces silicon-doped boron nitride (BN) as an engineered energy barrier that suppresses the dead zone effect and improves spatial charge trapping efficiency. Silicon was incorporated into BN by in situ atomic layer deposition (ALD) super-cycles, and the resulting Si-N bonds in BN generate higher density and deeper depth of electron traps. Energy band structure and Arrhenius analysis confirm the increase in electron trap depth, while device characteristics indicate enhanced trapping efficiency. Integrated into a scaled 4 nm SiN charge trap layer (CTL), the silicon-doped BN barrier increases the program window without degrading erase characteristics and improves electron retention. These results indicate that an optimized Si-doped BN energy barrier enables XY-scaling without compromising memory performance.