This work aims to investigate the methane emissions from integrated vertical-flow constructed wetlands (IVCWs) when ethanol is added as an external carbon source. In this study, a gradient of ethanol (0, 2, 4, 8, 16 and 32 mmol/L) was added as the carbon source in an IVCW planted with Cyperus alternifolius L. The results showed that the methane emission flux at an ethanol concentration of 32 mmol/L was 32.34 g CH4 m−2 day−1 less than that of the control experiment (0 mmol/L) and that the methane emission flux at an ethanol concentration of 16 mmol/L was 5.53 g CH4 m−2 day−1 less than that at 0 mmol/L. In addition, variations in the water quality driven by the different ethanol concentrations were found, with a redox potential range of −64 mV to +30 mV, a pH range of 6.6–6.9, a chemical oxygen demand (COD) removal rate range of 41% to 78%, and an ammonia nitrogen removal rate range of 59% to 82% after the ethanol addition. With the average CH4-C/TOC (%) value of 35% driven by ethanol, it will be beneficial to understand that CH4-C/TOC can be considered an ecological indicator of anthropogenic methanogenesis from treatment wetlands when driven by carbon sources or carbon loading. It can be concluded that adding ethanol as an external carbon source can not only meet the water quality demand of the IVCW treatment system but also stimulate and increase the average CH4 emissions from IVCWs by 23% compared with the control experiment. This finding indicates that an external carbon source can stimulate more CH4 emissions from IVCWs and shows the importance of carbon sources during sewage treatment processes when considering greenhouse emissions from treated wetlands.
Excessive molybdenum (VI) (Mo (VI)) in water threatens environmental safety and human health, yet rapid on-site methods for Mo (VI) determination remain limited. Here, we propose a rapid method for Mo (VI) determination using phenylfluorone (PF)-modified test strips with dual readouts: visual colorimetry and image-based analysis in the CIELAB (Lab*) color space, and demonstrate its applicability using urban park water samples. Based on visual colorimetry, a standard color card was established, providing a screening range of 0.08 to 0.8 mg L−1 (A blank (0 mg L−1) was used as the baseline reference). Moreover, by the LAB color space, the linear relationship between the color development results of the PF-modified test strip and the A channel conforms to y = 21.08 + 8.82x (R2 = 0.992), with a detection range of 0–0.8 mg L−1. The total detection time was reduced to 2.5 min. To evaluate accuracy in real matrices, influent, midstream, and effluent samples from Chengdu Living Water Park were analyzed, with UV-vis spectrophotometry used as the reference method. The test-strip results agreed well with UV-vis spectrophotometry, with relative errors below 5%. Overall, this study provides a portable, rapid, and accurate method for the detection of Mo (VI) in water, and has potential application prospects in the field of water environment detection in the future.