9 January 2019 in Superconductor Science and Technology
In this study, the effects of heat treatment temperature on superconducting properties were systematically studied by sintering silver-sheathed Ba
1−
x
K
x
Fe 2 As 2 tapes at different temperatures. The transport J c increases as the sintering temperature rises from 700 °C to 850 °C. The optimized J c values of tapes sintered at 900 °C and 850 °C reach 6.2 × 10 4 A cm −2 (4.2 K and 10 T) which represent a very high J c level for flat rolled mono-core silver-sheathed iron-based superconducting wires and tapes. The properties of tapes sintered at different temperatures were investigated, including grain crystallinity, core density, c -axis texture and elemental distribution. The results demonstrate that 850 °C is a suitable temperature to fabricate silver-sheathed Ba
1−
x
K
x
Fe 2 As 2 superconducting tapes.
4 December 2017 in IEEE Transactions on Applied Superconductivity
In this paper, the relationships between transport J c , the core density and texture are systematically studied by fabricating silver sheathed Sr 1-x K x Fe 2 As 2 superconducting tapes with different thickness. The cores densities increase when the tape thickness decreases to 0.5 mm. But the core density of 0.4 mm tapes is the same with that of the 0.5 mm ones as the core density has been saturated in such rolling deformation. However, there is a positive correlation between the transport J c and texture of superconducting tapes. We conclude that the core density and the texture have a combined influence on the final performance of tapes and the J c of iron-based superconducting tapes can be further improved by increasing the texture degree when the core density saturated within the experimental conditions.
16 November 2023 in Superconductor Science and Technology
To explore the potential of iron-based superconducting (IBS) tapes in high-field applications, IBS pancake coils were dry-wound using the uninsulated IBS tape, supplemented with cowound stainless steel tapes for reinforcement. We have successfully fabricated a double pancake coil (DP-1) and a series-connected coil consisting of six DP coils (DP-6). These coils underwent multiple charging tests in a 35 T resistive magnet and retesting in a 14 T superconducting magnet. After conducting multiple rounds of retesting in two different background field magnets, it was found that the IBS coils did not show any degradation in their current-carrying performance. The critical current (I c) value of the DP-1 at 4.2 K and 32 T reached 60 A. To systematically evaluate the I c performance of the six coils in the DP-6, we monitored the V–I curves between 26 voltage taps. The resistive voltage rise was observed at low charging currents, indicating that each coil has suffered different levels of damage. Nevertheless, the overcurrent tests demonstrated that the IBS coil can still carry a current far exceeding its I c without irreversible degradation. We concluded the possible reasons for these phenomena by analyzing the experimental details and test data. In addition, the coil’s internal structure was observed to assess the quality of coil winding, joint soldering, and epoxy resin impregnation. This study will provide references for the electromagnetic and mechanical properties of IBS tapes under ultra-high magnetic fields and contribute to the future development of higher-performance practical IBS coils.
9 March 2021 in Superconductor Science and Technology
122 type iron-based superconductors (IBSs) are potential for high-field applications, and the fabrication of high-performance IBS wires and tapes is essential. By using the powder-in-tube method, transport critical current density ( J c ) of hot-pressed (HP) silver-sheathed Ba
1−
x
K
x
Fe 2 As 2 (Ba-122) tapes have reached 1.5 × 10 5 A cm −2 at 4.2 K and 10 T. However, the J c of flat-rolled (FR) tapes is 6.2 × 10 4 A cm −2 (4.2 K, 10 T), less than half of the former. The grain orientation, grain size, and grain shape are important parameters for the understanding of the superconducting properties of IBS tapes. Such grain structure data can be provided by the electron backscatter diffraction (EBSD) technique. In this work, we extensively adopted EBSD to visualize the microstructure of state-of-the-art HP and FR Ba-122 tapes. The grain orientation, grain connectivity, grain size, and grain shape aspect ratio of these two types of tapes are quantitatively analyzed. The c -axis texture is commonly found in both HP and FR tapes, but no in-plane texture is discovered. The texture and grain connectivity in HP tapes are better than that in FR tapes. The grain size of FR tapes is smaller than that of HP tapes, and the hot-pressing processes can promote the growth of grains along the ab plane. We recommend that strong texture will promote the growth of grains, while the small-sized grains will return to limit the formation of texture. Therefore, finding a balance point that plays a synergistic promote effect of grain orientation and grain size is a strategy to improve the transport properties of IBS tapes further. The present results demonstrate that there is still margined to enhance the properties of IBS tapes.
19 February 2019 in IEEE Transactions on Applied Superconductivity
Monofilament $MgB_2$ / Fe wires were fabricated by us-ing internal Mg diffusion (IMD) process with ball milled crystalline boron powder. In this paper, the effect of C doping level and the ratio of Mg to B on these IMD-processed $MgB_2$ wires were investi-gated. It is found that the highest transport $J_c$ value was $\rm 6.2 \times 10^4 A/cm^2$ at 4.2 K and 10 T, when the carbon concentration was 4 % and the ratio of Mg to B is 1:1.57. The microstructure results showed that a number of B-rich particles still remained in $MgB_2$ reacted layer, though B powder was ground by ball milling. Be-sides, there's residual Mg in the center of the $MgB_2$ wires because of the large wire diameter. The analysis of these results indicates that higher $J_c$ data can be achieved after further optimization of the B particle size, the wire diameter and the ratio of Mg to B.
24 February 2022 in IEEE Transactions on Applied Superconductivity
The iron-based superconductor (IBS) is a good candidate for high field magnet applications. The bending effect and properties of IBS tapes were systematically investigated in this work. The bent Ba 1-x K x Fe 2 As 2 (Ba122/Ag/AgSn) 7-filamentary tapes with different bending diameters (D = 10, 15, 20, 25, 30 mm) were prepared by bend-and-react method. A special mechanical structure was used to prevent the heat-treated IBS tapes from being damaged during joint soldering and performance test. The critical current ( I c ) performances of all the bent samples have been tested at 4.2 K and 6-10 T. When the bending diameter is smaller than 30 mm, the transport I c of bent IBS tapes decreases with smaller bending diameters. The average ratio of I c (bent tape) and I c (straight tape) was also calculated. The Optical Microscope Images (OMI) show a lot of cracks that appear regularly in the outermost superconducting core away from the bending center, especially in D10 bent IBS tapes. The magnitude, type, and distribution of the stress in the bent tapes during the bending process were simulated and compared. The causes of the crack formation and the I c reduction in bent IBS tapes were also discussed in detail.