1 April 2012 in Measurement
This is the author’s version of a work that was accepted for publication in Measurement. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Measurement, Vol. 45, Issue 3, (2012) DOI: http://dx.doi.org/10.1016/j.measurement.2011.12.002This work presents a low cost 3-D location system based on ultrasonics and implemented with low-cost FPGAs. The mobile nodes of the system use distance estimation to several anchor points in order to trilaterate their positions with an accuracy of few centimeters. The ultrasonic transducers are handled with an ad hoc conditioning circuit based on instrumental amplifiers which provides high amplification keeping low noise. The proposed system is autonomous so there is no need of an external PC or other devices. A prototype of the system has been attached to a mobile robot to check the viability of the location system in a real scenario.This work has been partially supported by the TEC2009-09871 project of the Ministerio de Ciencia e Innovacion, Spain
1 January 2014 in International Journal of Advanced Robotic Systems
This paper presents a 2D indoor localization and orientation system based on a TDOA (Time Difference of Arrival) technique. It uses an array of receivers (four low-cost ultrasonic resonant devices in a square distribution) to implement low-computational-effort DOA (Direction of Arrival) algorithms, based on assumed plane-wave reception. The system only demands two transmitters at well-known positions on the ceiling of the room for obtaining the node position and orientation when it is deployed on the floor of the room. This system has been tested using a Xilinx Spartan-3A FPGA that implements a 52 MHz MicroBlaze. The experimental results include a total of 1,440 points, obtaining a mean localization error of 5.17 cm and a mean orientation error of 3.34°. For this system, the localization and orientation processes are executed in less than 50 us.
11 October 2015 in Journal of Intelligent & Robotic Systems