Bio-based fertilizers (BBFs) produced from organic waste have the potential to reduce societal dependence on limited and energy-intensive mineral fertilizers. BBFs, thereby, contribute to a circular economy for fertilizers. However, BBFs can contain plastic fragments and hazardous additives such as phthalate plasticizers, which could constitute a risk for agricultural soils and the environment. This study assessed the exposure associated with plastic and phthalates in BBFs from three types of organic wastes: agricultural and food industry waste (AgriFoodInduWaste), sewage sludge (SewSludge), and biowaste (i.e., garden, park, food and kitchen waste). The wastes were associated with various treatments like drying, anaerobic digestion, and vermicomposting. The number of microplastics (0.045-5 mm) increased from AgriFoodInduWaste-BBFs (15-258 particles g-1), to SewSludge-BBFs (59-1456 particles g-1) and then to Biowaste-BBFs (828-2912 particles g-1). Biowaste-BBFs mostly contained packaging plastics (e.g., polyethylene terephthalate), with the mass of plastic (>10 g kg-1) exceeding the EU threshold (3 g kg-1, plastics >2 mm). Other BBFs mostly contained small (< 1 mm) non-packaging plastics in amounts below the EU limit. The calculated numbers of microplastics entering agricultural soils via BBF application was high (107-1010 microplastics ha-1y-1), but the mass of plastic released from AgriFoodInduWaste-BBFs and SewSludge-BBFs was limited (< 1 and <7 kg ha-1y-1) compared to Biowaste-BBFs (95-156 kg ha-1y-1). The concentrations of di(2-ethylhexyl)phthalate (DEHP; < 2.5 mg kg-1) and phthalate transformation products (< 8 mg kg-1) were low (< benchmark of 50 mg kg-1 for DEHP), attributable to both the current phase-out of DEHP as well as phthalate degradation during waste treatment. The Biowaste-BBF exposed to vermicomposting indicated that worms accumulated phthalate transformation products (4 mg kg-1). These results are overall positive for the implementation of the studied AgriFoodInduWaste-BBFs and SewSludge-BBFs. However, the safe use of the studied Biowaste-BBFs requires reducing plastic use and improving sorting methods to minimize plastic contamination, in order to protect agricultural soils and reduce the environmental impact of Biowaste-BBFs.
16 November 2024 in Science of The Total Environment
Bio-based fertilizers (BBFs) produced from organic waste contribute to closed-loop nutrient cycles and circular agriculture. However, persistent organic contaminants, such as per- and poly-fluoroalkyl substances (PFAS), polychlorobiphenyls (PCBs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), as well as polyaromatic hydrocarbons (PAHs) can be present in organic waste or be formed during valorization processes. Consequently, these hazardous substances may be introduced into agricultural soils and the food chain via BBFs. This study assessed the exposure of 84 target substances and extractable organic fluorine (EOF) in 19 BBFs produced from different types of waste, including agricultural and food industrial waste, sewage sludge, and biowaste, and through various types of valorization methods, including hygienization at low temperatures (<150 °C) as well as pyrolysis and incineration at elevated temperatures (150-900 °C). The concentrations in BBFs (ΣPFOS & PFOA: <30 μg kg-1, Σ6PCBs: <15 μg kg-1, Σ11PAHs: <3 mg kg-1, Σ17PCDD/Fs: 140 μg kg-1), so monitoring of more PFAS is recommended. The calculated expected concentrations in soils after one BBF application (e.g. PFOS: <0.05 μg kg-1) fell below background contamination levels (PFOS: 2.7 μg kg-1) elsewhere in the literature. This was confirmed by the analysis of BBF-amended soils from field experiments (Finland and Austria). Studies on target legacy contaminants in sewage sludge were reviewed, indicating a general decreasing trend in concentration with an apparent half-life ranging from 4 (PFOS) to 9 (PCDD/Fs) years. Modelled cumulative concentrations of the target contaminants in agricultural soils indicated low long-term risks. Concentrations estimated and analyzed in cereal grains were low, indicating that exposure by cereal consumption is well below tolerable daily intakes.
Passive samplers are key tools to sample hydrophilic micropollutants in water. Two main approaches address the influence of hydrodynamics: (1) determining site-specific sampling rate ( R S ) by characterizing k w , the mass transfer coefficient of the water-boundary layer (WBL), and (2) reducing WBL impact using a diffusive material to control the uptake. The first requires calibration data and the second has only been achieved using fragile diffusive material. This study assesses the transfer of hydrophilic contaminants through polytetrafluoroethylene (PTFE; 30 mu m thick), a new membrane material with lower sorption than commonly used polyethersulfone (PES). Combined for the first time in a Chemcatcher-like configuration, we calibrated the modified samplers for 44 micropollutants to provide R S - k w relationships for in-situ R S determination (approach 1). Micropollutants accumulated over 2000 times more on the sorbent than on PTFE. PTFE-based R S (0.027 to 0.300 L day -1 ) were 2.5 higher than previously reported with PES. Membrane property measurements (porosity, tortuosity) indicated that accumulation is primarily controlled by the membrane. Extrapolation indicated that using thicker PTFE membranes ( >= 100 mu m) would shift uptake control entirely to the membrane in river conditions (approach 2). This finding could enable R S prediction based on contaminants properties, thus representing a significant advancement in passive sampling.
Water contamination is a growing concern in society. New environmental laws are being enacted to define intolerable human activities, and their enforcement is increasingly supported by forensic science. However, water contamination is a broader security issue that is not only caused by illegal human behavior. Risk‐based approaches are needed to prevent (re)occurrence of incidents and minimize their negative consequences. This can be achieved through the formalization of a monitoring process producing intelligence (i.e., actionable knowledge), crucial to detect recurring incidents, and guiding decision‐makers in their choice of preventive and responsive actions. In this perspective, forensic science has a key role to play in integrating vestiges from water‐contaminating activities (i.e., traces) in such a problem‐solving process. Information conveyed by traces allows detecting similarities among contamination events (i.e., patterns), inferring common causes, and better understanding of mechanisms and consequences of water contamination. The different stages of the process will be described and illustrated through a real case example. Current barriers to the implementation of such a process are then discussed, showing how systemic issues and complexity may prevent the establishment of links across contamination events, thus negatively impacting the generation of intelligence. To overcome these obstacles, we underline the importance to initiate local and size‐limited approaches by implementing relatively simple and flexible systems. New knowledge can be used to improve local situations and help stakeholders to understand the benefits of such a process; then, by a bottom‐up iterative learning process, the approach can be given a greater ambition at a larger scale.This article is categorized under: Forensic Science in Action/Crime Scene Investigation > Special Situations and Investigations Crime Scene Investigation > From Traces to Intelligence and Evidence Forensic Chemistry and Trace Evidence > Forensic Food and Environment Analysis
The present study investigates the long-term immobilization efficiency of biochar on target per- and polyfluoroalkyl substances (PFAS) and precursors in well-drained soils contaminated by aqueous film-forming foam (AFFF) (Ʃ27PFAS = 1624 ± 276 µg/kg) over 2 years. The total oxidizable precursor (TOP) assay revealed a large precursor reservoir in the soil. Fifteen outdoor field-scale columns were packed with contaminated soil (48 kg) without (control columns, triplicates) and with biochar amendments: Three sewage sludge-based biochars were homogeneously mixed into the soil at a 1% (w/w) dose in triplicate columns. One of the biochars was additionally applied as a barrier at the column base (1% w/w) in a separate set of columns. The best-performing biochar immobilized long-chain PFAS by 91.0 ± 35.0% and short-chain PFAS by 96.7 ± 32.9%, possibly due to a well-developed porosity. Compared to the control columns, the fluctuating PFAS leaching were negligible in columns amended with the best-performing biochar, but the immobilization efficiency of short-chain PFAS decreased after one year (from 97.8% to 74.2%). Applying biochar as a barrier was two times more effective than homogenous mixing, and the effect was most pronounced for long-chain PFAS. Our findings suggest that biochar may immobilize precursors, notably CF3-CF5 precursors, to the same extent or better than their typical target perfluoroalkyl acids transformation products. More research is, however, needed to confirm these trends. Going beyond simple lab experiments, this study suggests that biochar is a promising solution for PFAS remediation and brings the technology closer to field application.
21 March 2026 in Environmental Toxicology and Chemistry
Passive sampling offers a promising approach for assessing contaminants in surface waters; however, its broader adoption is limited by the need for standardized and user-friendly implementation methods and the availability of suitable sorbents. This study investigates the performance of the widely used Empore™ SDB-RPS disk and two potential alternative sorbent phases—Affinisep AttractSPE® HLB (AHLB) and Biotage Atlantic® HLB-L (BHLB)—for the uptake of >100 pesticides with diverse physicochemical properties (logKOW = −2 to 5, pKa = −3.15 to 12.58) and compares them against the Empore SDB-RPS disk. The passive sampler (PS) performance was evaluated under controlled laboratory settings using a flow system at environmentally relevant conditions (21 cm/s, 300 ng/L, 2-week exposure) and an established open-source stainless-steel housing. Diffusive transport characteristics were assessed by determining relative resistances of the water boundary layer and the sorbent to the mass transfer, with average sorbent resistance (1/Rs, tot) contributions ranging from 39% and 40% (AHLB and SDB-RPS) to 87% (BHLB). Performance under field conditions was assessed through a 2-week calibration alongside active sampling in an agricultural stream (22–40 cm/s). Pesticide accumulation was linear to curvilinear (monotonically increasing) for all PSs, despite uptake being partially (AHLB and SDB-RPS) or almost completely (BHLB) controlled by the sorbent. The uptake of pesticides to all PSs could be well described by a simple first-order uptake model as opposed to more complex approaches, such as incorporating fluctuating water concentrations or diffusion models. Laboratory sampling rates (Rs) could be determined for 78% of pesticides. Comparable results were observed for AHLB (Rs average = 0.42 ± 0.24 L/day) and SDB-RPS (Rs average = 0.41 ± 0.27 L/day), whereas BHLB showed lower rates (on average, a factor of 5 lower). Field evaluations confirmed the similar capabilities of AHLB to SDB-RPS, detecting ≥43 of the studied pesticides, while BHLB detected fewer (29 pesticides), likely due to its fiberglass structure acting as additional resistance. For all sorbents and compounds with available sampling rates (>50% of detected compounds in the field), time-weighted average concentrations derived from PS closely matched active sampling measurements between 0.5 and 2.5 times, supporting their reliability for pesticide quantification. Overall, this study provides recoveries, sampling rates, and sampler–water partition coefficients (Ksw) for three PSs for a range of pesticides. This work helps to facilitate the broader adoption of passive sampling techniques for regulatory and environmental analysis.