30 July 2020 in ACS Applied Energy Materials
6 January 2021 in Angewandte Chemie International Edition
Pt dissolution has already been intensively studied in aqueous model systems and many mechanistic insights have been gained. Nevertheless, transfer of new knowledge to real‐world fuel cell systems is still a significant challenge. To close this gap, we present a novel in situ method combining a gas diffusion electrode (GDE) half‐cell with inductively coupled plasma mass spectrometry (ICP‐MS). With this setup, Pt dissolution in realistic catalyst layers and the transport of dissolved Pt species through Nafion membranes were evaluated directly. We observed that 1) specific Pt dissolution increased significantly with decreasing Pt loading, 2) in comparison to experiments on aqueous model systems with flow cells, the measured dissolution in GDE experiments was considerably lower, and 3) by adding a membrane onto the catalyst layer, Pt dissolution was reduced even further. All these phenomena are attributed to the varying mass transport conditions of dissolved Pt species, influencing re‐deposition and equilibrium potential.
19 May 2021 in ACS Physical Chemistry Au
Photocorrosion of an n-type semiconductor is anticipated to be unfavorable if its decomposition potential is situated below its valence band-edge position. Tungsten trioxide (WO3) is generally considered as a stable photoanode for different photoelectrochemical (PEC) applications. Such oversimplified considerations ignore reactions with electrolytes added to the solvent. Moreover, kinetic effects are neglected. The fallacy of such approaches has been demonstrated in our previous study dealing with WO3 instability in H2SO4. In this work, in order to understand parameters influencing WO3 photocorrosion and to identify more suitable reaction environments, H2SO4, HClO4, HNO3, CH3O3SH, as electrolytes are considered. Model WO3 thin films are fabricated with a spray-coating process. Photoactivity of the samples is determined with a photoelectrochemical scanning flow cell. Photostability is measured in real time by coupling an inductively coupled plasma mass spectrometer to the scanning flow cell to determine the photoanode dissolution products. It is found that the photoactivity of the WO3 films increases as HNO3 < HClO4 ≈ H2SO4 < CH3O3SH, whereas the photostability exhibits the opposite trend. The differences observed in photocorrosion are explained considering stability of the electrolytes toward decomposition. This work demonstrates that electrolytes and their reactive intermediates clearly influence the photostability of photoelectrodes. Thus, the careful selection of the photoelectrode/electrolyte combination is of crucial importance in the design of a stable photoelectrochemical water-splitting device.
15 February 2023 in Advanced Energy Materials
Finding the optimum structure in porous transport electrodes (PTEs) for proton exchange membrane water electrolyzer anodes is one of the central current technological challenges. Both the structure of the porous transport layer (PTL) and its interaction with the catalyst layer are crucial in finding this optimum structure. In this regard, manufacturing the catalyst layer on top of a PTL as a structure‐building process must be understood to find improved transport electrode structures. This work presents a PTE tomography where the catalyst ink is directly processed on a PTL. The catalyst distribution of anodic PTEs is analyzed and compared via X‐ray microtomography and cross‐sectional imaging of embedded PTE samples. The majority of the catalyst lies within the first 100 µm of the PTE. Considering the penetration depth of the membrane, a maximum of 60% of the catalyst is effectively used. For the first time, a voxel‐based catalyst layer deposition model is created and analyzed that is based on simple assumptions in the deposition process. This deposition model fits very well with the previous tomographic analysis. In the future, this model will allow more profound insight into the manufacturing process and is an important prerequisite for a future optimum design of PTEs.
17 May 2021 in Journal of Materials Chemistry A
Bipolar interfaces located directly between a proton conducting membrane and an anion exchange ionomer based anode catalyst layer are investigated in membrane electrode assemblies for water electrolysis.
6 January 2021 in Angewandte Chemie
Pt dissolution has already been intensively studied in aqueous model systems and many mechanistic insights have been gained. Nevertheless, transfer of new knowledge to real‐world fuel cell systems is still a significant challenge. To close this gap, we present a novel in situ method combining a gas diffusion electrode (GDE) half‐cell with inductively coupled plasma mass spectrometry (ICP‐MS). With this setup, Pt dissolution in realistic catalyst layers and the transport of dissolved Pt species through Nafion membranes were evaluated directly. We observed that 1) specific Pt dissolution increased significantly with decreasing Pt loading, 2) in comparison to experiments on aqueous model systems with flow cells, the measured dissolution in GDE experiments was considerably lower, and 3) by adding a membrane onto the catalyst layer, Pt dissolution was reduced even further. All these phenomena are attributed to the varying mass transport conditions of dissolved Pt species, influencing re‐deposition and equilibrium potential.