Eco-friendly biopolymers in water-based drilling fluids often suffer from thermal degradation and inadequate filtration control under harsh downhole condit
15 January 2023 in ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY
Corrosion is one of the disasters attacking the drilling tools, particularly the drill pipes. Drilling fluid is the corrosive that increase the rate of corrosion in the pipes. In this study, it is intended to reduce the corrosivity of drilling fluid using a Prosopis farcta powder material. A natural, biodegradable, and environmentally friendly additive is added to the fluid in different particle sizes and amounts to obtain the lowest corrosion rate. Experiments are conducted in a well-like environment (high pressure high temperature filter press) over a wide range of parameters including pressure, temperature, and properties of the drilling fluid under dynamic conditions. The aim is to eliminate or reduce the corrosivity of the mud as well as to control the losses. The results showed a lower corrosion rate, 0.0029 mm/year, using P. farcta material in comparison with those obtained by researchers in the previous studies.
This review examines the use of acid gases, primarily hydrogen sulfide (H2S) and carbon dioxide (CO2), in enhanced oil recovery (EOR) applications. The study synthesizes laboratory, simulation, and field-scale research to evaluate the technical mechanisms, environmental implications, and economic feasibility of acid-gas-based EOR. Key findings indicate that H2S-rich injection can significantly reduce minimum miscibility pressure, improve oil swelling and viscosity reduction, and enhance sweep efficiency compared to conventional CO2 or hydrocarbon gas injection. However, challenges such as sulfur and asphaltene precipitation, corrosion risks, and operational safety constraints must be carefully managed. Compared with alternative EOR techniques, acid gas injection offers the unique advantage of combining incremental oil recovery with emissions reduction through subsurface disposal. This review identifies critical research gaps related to long-term geochemical effects, solids precipitation control, and economic optimization under regulatory constraints. Overall, acid gas EOR represents a promising pathway to integrate recovery enhancement with environmental stewardship in sour hydrocarbon reservoirs.
25 September 2026 in Physics and Chemistry of the Earth, Parts A/B/C
The low lubricity and high filtration loss of water-based drilling fluids (WBDFs) hinder the drilling industry and are the cause of high torque and drag, while also contributing to nuisance conditions such as wellbore instability. This study presents a new, environmentally friendly SiO2 nanoparticle (NP) made from rice husk ash (RHA), one of the byproducts of agriculture, as a multifunctional additive for WBDFs. The RHA-SiO2-NPs were produced by an alkaline extraction method and characterized using X-ray diffraction and scanning electron microscopy. RHA-SiO2 NPs were incorporated (0.1–1.0 wt%) into a bentonite-based mud and evaluated for rheology, API fluid loss, and lubricity. The results showed that the addition of only 0.5 weight % RHA-SiO2 resulted in a 60% reduction in fluid loss (16.8–6.8 mL) and a 39% improvement to the lubricity coefficient (0.28–0.17) in comparison to the base fluid. The presence of the RHA-SiO2-NPs also increased the yield point and gel strengths when looking at the rheological properties, indicating improved hole-cleaning capabilities. RHA-SiO2 NPs demonstrated multifunctional performance and potential for sustainable drilling applications.