Ahmed Abdulrahman

Dr. Ahmed Abdulrahman

University of Zakho
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 August 2022 in Photonics
Verified
Journal Article
Open access
PDF file
SKShayma Tahsin Karam
Shayma Tahsin Karam
Ahmed AbdulrahmanAhmed Abdulrahman
Ahmed Abdulrahman
Zinc oxide (ZnO) nanoparticles (NPs) were fabricated by using leaves extracted from the thyme plant by employing a green method. The influence of several calcination (annealing) temperatures on the characteristic properties of fabricated ZnO NPs and the optimum calcination temperature for growing ZnO NPs were studied and reported. The studied calcination temperatures were 150 °C, 250 °C, 350 °C, and 450 °C. Different characterization techniques were used to study and examine the properties of biosynthesized ZnO NPs by using thyme plant leaf extract. The results of each UV-Vis analysis and FTIR spectrum of the leaf extract of the thyme plant confirmed and suggested that the selected leaf extract of thyme is a practicable choice for green synthesis of ZnO NPs. The investigated UV-Vis spectra of plant leaf extract displayed two strong absorption peaks at 266 nm and 313 nm at ambient temperature. The results of FESEM images showed that the calcination temperature has a significant and large effect on the morphology, size, shape, and orientation of ZnO NPs, which have a spherical shape with an average size in the range of 39.4–51.86 nm. In addition, the XRD results confirm that the ZnO NPs formed are pure ZnO with wurtzite hexagonal structure with particle size along the (002) peak in the range of 35.20–243.3 nm. The results of UV-Vis of ZnO NPs displayed a strong peak for all ZnO NPs produced at different calcination temperatures, a high absorbance in the UV region below 400 nm, and a low absorbance rate in the visible range. The obtained energy band gap (Eg) was in the range of 2.645–2.7 eV. In addition, the results of the FTIR spectra of ZnO NPs at different calcination temperatures revealed there was no discernible peak in the monitoring range, which indicated the purity of the ZnO nanoparticles generated via using thyme leaf extract. In addition, from all obtained results of the fabricated ZnO NPs, the ZnO NPs synthesized at the calcination temperature of 450 °C showed a high quality and improvement compared to the ZnO NPs synthesized at other calcination temperatures.

9 May 2020 in Crystals
Verified
Journal Article
Open access
PDF file
Ahmed AbdulrahmanAhmed Abdulrahman
Ahmed Abdulrahman
Sabah AhmedSabah Ahmed
Sabah Ahmed
Naser AhmedNaser Ahmed
Naser Ahmed
MAMunirah Almessiere
Munirah Almessiere
In this study, the effects of different precursor concentrations on the growth and characteristics properties of the zinc oxide (ZnO) nanorods (NRs) synthesized by using modified and conventional chemical bath deposition (CBD) methods were investigated. The morphologic, structural and optical properties of synthesized ZnO NRs with different precursor concentrations were studied using various characterization techniques. The experimental results show that the varying precursor concentration of the reactants has a remarkable and significant effect on the growth and characteristics properties of ZnO NRs. In addition, the characteristic properties of ZnO NRs grown using the modified method showed significantly improved and enhanced properties. The average length of grown ZnO NRs increased with increased precursor concentration; it can be seen that longer ZnO NRs have been investigated using the modified CBD methods. The ZnO NRs synthesized at 0.05 M using the modified method were grown with high aspect ratios than the ZnO NRs grown using conventional means which were 25 and 11, respectively. The growth rate increased with increased precursor concentration; it can be observed that a higher growth rate was seen using the modification CBD method. Furthermore, XRD results for the two cases reveal that the grown ZnO samples were a nanorod-like in shape and possessed a hexagonal wurtzite structure with high crystal quality. No other phases from the impurity were observed. The diffraction peaks along (002) plane became higher, sharper and narrower as precursor concentration increased, suggesting that the crystalline quality of ZnO NRs grown using the modified method was more enhanced and better than conventional methods. However, optical studies show that the transmittance at each concentration was more than two times higher than the transmittance using the modified CBD method. In addition, optical studies demonstrated that the ZnO NRs grown by using modified and conventional methods had a direct Eg in the range of (3.2–3.26) eV and (3.15–3.19) eV, respectively. It was demonstrated in two methods that ZnO NRs grown at a precursor concentration 0.05 M gave the most favorable result, since the NRs had best characteristic properties.

31 January 2023 in Journal of Molecular Structure
Verified
Journal Article
Closed access
SISherwan M. Mahdi Ismail
Sherwan M. Mahdi Ismail
SASabah M. Ahmed
Sabah M. Ahmed
Ahmed AbdulrahmanAhmed Abdulrahman
Ahmed Abdulrahman
MAMunirah A. AlMessiere
Munirah A. AlMessiere

29 December 2023 in Energy
Verified
Journal Article
Closed access
AAAli Ahmadi
Ali Ahmadi
AMAbbas Khaksar Manshad
Abbas Khaksar Manshad
MAMajid Akbari
Majid Akbari
JAJagar A. Ali
Jagar A. Ali
PJPshtiwan T. Jaf
Pshtiwan T. Jaf
Ahmed AbdulrahmanAhmed Abdulrahman
Ahmed Abdulrahman

9 March 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Ahmed AbdulrahmanAhmed Abdulrahman
Ahmed Abdulrahman
Sabah AhmedSabah Ahmed
Sabah Ahmed
Azeez BarzinjyAzeez Barzinjy
Azeez Barzinjy
Samir HamadSamir Hamad
Samir Hamad
Naser AhmedNaser Ahmed
Naser Ahmed
MAMunirah Almessiere
Munirah Almessiere
Ultraviolet (UV) photodetectors (PDs) based on high-quality well-aligned ZnO nanorods (NRs) were fabricated using both modified and conventional chemical bath deposition (CBD) methods. The modified chemical bath deposition (M-CBD) method was made by adding air bubbles to the growth solution during the CBD process. The viability and effectiveness of M-CBD were examined by developing UV PDs based on ZnO NRs. The ZnO nano-seed layer was coated on a glass substrate utilizing radiofrequency (RF) sputtering. The impact of the different growth-times on morphology, growth rate, crystal structure, and optical and chemical properties were investigated systematically using different characterization techniques, such as field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) analysis, UV–VIS double beam spectrometer, and energy dispersive X-ray analysis (EDX), respectively. The Al/ZnO UV PDs based on ZnO nanorods were fabricated with optimum growth conditions through the two methods of preparation. This study showed that the synthesized ZnO NRs using the M-CBD method for different growth times possess better properties than the conventional method under similar deposition conditions. Despite having the highest aspect ratio and growth rate of ZnO NRs, which were found at 4 h growth duration for both methods, the aspect ratio of ZnO NRs using the M-CBD technique was comparatively higher than the conventional CBD method. Besides, the UV PDs fabricated by the M-CBD method at 5 V bias voltage showed high sensitivity, short response time, quick recovery time, high gain, low dark current, and high photocurrent compared with the UV PD device fabricated by the conventional CBD method.

20 July 2020 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
Ahmed AbdulrahmanAhmed Abdulrahman
Ahmed Abdulrahman