Jiangang Feng

Jiangang Feng

Auto-generated profile, based on publicly available information

Jiangang Feng

College of Agricultural Science and Engineering, Hohai University 3 , Nanjing 210098, People's Republic of China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2023 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
Kan KanKan Kan
Kan Kan
FZFeng Zhao
Feng Zhao
HXHui Xu
Hui Xu
JFJiangang Feng
Jiangang Feng
Huixiang ChenHuixiang Chen
Huixiang Chen
Weidong LiuWeidong Liu
Weidong Liu
As a low-cost scheme for small-scale hydropower generation, pump as turbines (PATs) are used at different hydrosites around the world. Nevertheless, a big number of recently conducted studies on PAT performance have mainly focused on the centrifugal type, despite the fact that the axial-flow type has a comparatively large flow capacity, thus disposing of higher power density. Therefore, this article seeks to investigate the flow dynamics of an axial-flow PAT and associated energy loss characteristics, under both pump and turbine operating modes. It adopts the numerical simulation method and uses entropy production theory to propose an energy loss intensity model in the cylindrical coordinate system, which quantitatively gives the spatial variation pattern for energy losses in pump and turbine operating modes. In addition, the correlation between energy loss and flow instability is deeply analyzed, where the energy characteristics in pump and turbine modes are quantitatively evaluated. It is shown that the energy loss within the impeller and the guide vane flow fields, for both operating modes, is mainly because of the turbulent entropy production. The proportion of direct entropy production and wall entropy production is found to be relatively small. The velocity gradient, flow vorticity, turbulence intensity, and energy losses within the flow passages of the axial-flow PAT have been closely related. However, owing to the difference in PAT operating modes, there is a significant difference in the location of energy losses. The unstable flow phenomena, such as the impact at the blade inlet, flow deviation at the blade outlet, flow separation, back-flow, and vortex, are the main reasons for entropy production. This study serves as a reference for the design, optimization, and application of axial-flow PATs.

1 September 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
HYHan Ye
Han Ye
SQShangtuo Qian
Shangtuo Qian
DZDavid Zhiwei Zhu
David Zhiwei Zhu
JFJiangang Feng
Jiangang Feng
HXHui Xu
Hui Xu
QZQin Zeng
Qin Zeng
The impact of drops on dry solid surfaces has important applications in engineering. The post-impact behavior of drops can be classified into non-splash and splash, and there is a lack of splash prediction models that well consider the independent and coupled effects of liquid properties, drop impact characteristics, and surface properties. In this study, machine learning methods of Random Forest (RF) and Support Vector Machine (SVM) are applied to build splash prediction models and analyze the effects of different features. The RF model achieves good prediction accuracy and identifies the roughness R*, Weber number We, Reynolds number Re, and contact angle θeq as the most influential parameters, with decreasing importance. The interpretability analysis shows the increasing splashing tendency with increasing We, Re, and R* and decreasing cos θeq, and a special case of non-splash by drops impact on hydrophobic surfaces with cos θeq ≈ −0.45 is found, which can be explained by the coupled effects of drop and surface features. The classical splash prediction model, K-parameter model, is improved by SVM in an explicit form and considering the effects of liquid properties, drop impact characteristics, and surface properties. The improved K-parameter model has good performance for surfaces with various roughness and wettability, and its prediction accuracy reaches 86.49%, which is significantly higher than 67.57% of the K-parameter model, 46.49% of the Riboux and Gordillo model, and 66.10% of the Zhang model. This study is expected to provide valuable insight into the control of non-splash or splash of drops according to different requirements during applications.

1 March 2024 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
Kan KanKan Kan
Kan Kan
QZQingying Zhang
Qingying Zhang
JFJiangang Feng
Jiangang Feng
YZYuan Zheng
Yuan Zheng
HXHui Xu
Hui Xu
HLHaoyu Li
Haoyu Li
When axial flow pumps-as-turbines (PATs) operate under off-design conditions, unstable and unsteady flow structures appear in the internal flow field, resulting in suboptimal functioning. These operating conditions not only decrease the efficiency of the hydraulic machines but also affect their mechanical reliability. This study establishes relative streamline coordinates, based on the blade's mean camber line, to investigate flow instabilities in axial flow PATs from a new perspective. Numerical simulations on an axial flow PAT were performed and validated using experimental data. The results show that flow separation is more likely to occur due to the more curved profile at the blade's suction surface, leading to considerable fluctuations in velocity along the flow direction and enstrophy amplitude near both the hub and impeller shroud. Moreover, the poor matching of the relative inflow angle of the impeller with the blade inlet angle leads to impingement losses near their leading edge, generating unstable flows and significant pressure pulsations, which induces hydraulic instability within the impeller. In addition to rotor-stator interference effects, the curvature of the blade suction surface profile and the bend structure of inlet conduit are significant factors that influence the pressure pulsation distribution of the PAT. An analysis of the enstrophy transport equation indicates that the relative vortex generation and the Reynolds stress dissipation terms play a key role in both vortex generation and dissipation, whereas the viscous term has a lower influence. These findings can serve as a reference for the optimization and efficient design of axial flow PATs.

1 January 2025 in Physics of Fluids
Verified
Journal Article
Closed access
DWDongsheng Wang
Dongsheng Wang
TMTong Mu
Tong Mu
JFJiangang Feng
Jiangang Feng
RZRui Zhang
Rui Zhang
ZFZhaodan Fei
Zhaodan Fei
PZPeipei Zhang
Peipei Zhang
Axial-flow pumps have complex hydraulic performance under diverse conditions, especially under low-flow conditions, which may occur rotational stall and brings serious system vibration. By combining experiments and numerical simulation analysis, the fine features of the local internal flow field in multi-flow rate conditions are accurately reflected, revealing the mechanism of changes in the internal flow field and hydraulic performance of axial-flow pumps under different flow conditions, especially at low-flow conditions. As the flow rate decreased, the backflow velocity in near wall area of the inlet pipe and circumferential swirl velocity increased gradually, and the tip leakage vortex (TLV) and pressure surface vortex also increased gradually. Based on the average axial velocity V0 under the design flow rate, the axial backflow velocity was −1.18 V0 and the circumferential velocity was −3.53 V0 under the deep stall condition. The maximum vorticity of TLV, secondary vortex and pressure surface vortex was 5 × 106 S−2, and the area of maximum intensity was the largest. The interaction between the secondary vortices and the mainstream intensifies the formation and development of passage vortex and blocks the inlet pipe. Under the influence of comprehensive factors, the entropy production in the inlet channel and impeller region reached the maximum under the deep stall condition, both of which were above 22 × 10−2 kg m2 s−3 K−1, more than twice that outside the saddle zone. This study analyzed the flow instability under biased conditions from multiple levels and perspectives, providing a basis for improving the hydraulic performance under diverse flow conditions in the future.

1 August 2023 in AIP Advances
Verified
Journal Article
Open access
PDF file
HLHaoyu Li
Haoyu Li
JFJiangang Feng
Jiangang Feng
YZYuan Zheng
Yuan Zheng
HXHui Xu
Hui Xu
Huixiang ChenHuixiang Chen
Huixiang Chen
Kan KanKan Kan
Kan Kan
Traditional numerical simulation techniques, such as sliding mesh, dynamic mesh, and others, have many limitations in dealing with flow simulation with the large-scale movement of solid boundaries, which is the case for simulating the flow of complex-shaped hydraulic turbomachinery such as propellers, pumps, and turbines. The immersed boundary (IB) method provides a new approach to solve the above-mentioned limitations. Therefore, this study proposes a sharp-interface IB method based on the level-set function that is suitable for simulating the flow through turbomachinery with complex geometries. This method is applied to actual three-dimensional numerical simulations of high-Reynolds number propellers using an in-house computational fluid dynamics solver. The results show that the proposed method can provide comparatively accurate predictions of unsteady load coefficients within the propeller flow passage and capture the correct propeller wake characteristics as well as the interaction between the propeller wake and free surface. This study is aimed at providing a theoretical basis and engineering reference for the application of the IB method in engineering numerical simulations.

6 November 2021
Verified
Conference Paper
Closed access
XWXiaosheng Wang
Xiaosheng Wang
SQShangtuo Qian
Shangtuo Qian
YCYuling Chen
Yuling Chen
JFJiangang Feng
Jiangang Feng
The storage tunnel system is an important project to solve the shortage of urban storage capacity and prevent waterlogging, geyser phenomenon is a serious hydraulic accident in the system, and it is of great significance to study geyser characteristics and flow control measures for safe operation of storage tunnel system. In the present work, the bubble rising process in the vertical pipe was studied used numerical simulation method, the influence of orifice plates on Taylor bubble of geyser in storage tunnel system had been analyzed in detail. The research results indicated that orifice plates had a significant effect on Taylor bubble of geyser, under the action of orifice plates, the bubble shape, bubble pressure and flow field structure are fundamentally changed due to the influence of local jet flow and entrainment air, the difference value between the bubble pressure head and the water column height and the pressure gradient of water column were greatly reduced, which leaded to a significant reduction of the bubble rising height and the maximum bubble velocity, this was beneficial to reduce the intensity of geyser in storage tunnel system.