Insung Park

Insung Park

Auto-generated profile, based on publicly available information

Insung Park

Cryogenic Apparatus Research Center, Korea Electrotechnology Research Institute, Changwon, South Korea

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 February 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
IPInsung Park
Insung Park
WOWon-Jae Oh
Won-Jae Oh
JLJae-Hun Lee
Jae-Hun Lee
SMSeung-Hyun Moon
Seung-Hyun Moon
SYSang-Im Yoo
Sang-Im Yoo
In order to improve in-field J c values of GdBCO CCs fabricated by the reactive co-evaporation by deposition and reaction (RCE-DR) process with the nominal composition of Gd:Ba:Cu = 1:1:2.5, the Gd 2 O 3 particles trapped in the GdBCO superconducting matrix were refined by controlling the nucleation and growth temperature of Gd 2 O 3 in the liquid phase before the growth of GdBCO film at the same growth conditions of 860 °C in 150 mTorr oxygen pressure. With decreasing the growth temperature of Gd 2 O 3 from 860 to 820 °C in the oxygen pressure of 30 mTorr, the average particle size of Gd 2 O 3 was monotonously decreased from 125 ± 41 to 73 ± 31 nm. With refining the average particle size of Gd 2 O 3, while J c in a self-field was monotonously decreased, minimum in-field J c values were first increased and then decreased again. With lowering the growth temperature of Gd 2 O 3 , the gradual decrease of self-field J c may be mainly attributed to the gradual degradation of both in-plane and out-of-plane textures, the variation of the minimum in-field J c values might originate mainly from the variation of the stacking fault density, which, however, requires further analysis.

21 January 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
IPInsung Park
Insung Park
GKGwantae Kim
Gwantae Kim
HKHosup Kim
Hosup Kim
JKJeongtae Kim
Jeongtae Kim
HHHongsoo Ha
Hongsoo Ha
In this article, we present a newly developed continuous thickness measurement system for long-length high-temperature superconducting (HTS) coated conductors (CCs). Uniform thickness in HTS CCs is critical for maintaining consistent magnetic field performance and mechanical integrity, particularly in applications such as superconducting coil windings. Our system employs a reel-to-reel (R2R) mechanism integrated with confocal laser sensors to enable real-time, non-contact thickness measurements. Comprehensive trials were carried out to evaluate the system's accuracy and precision, including static scans at various speeds and comparisons with cross-sectional analysis using optical microscopy. Additionally, the system demonstrated high precision, with repeatability confirmed through 10 repeated measurements along the length and width of a 12 m-long Cu-plated HTS CC. This development is expected to significantly improve the manufacturing process, enhance quality control, and support factory automation for consistent production of high-performance HTS magnets.

10 February 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
SPSeong Hyeon Park
Seong Hyeon Park
DBDowon Baek
Dowon Baek
IPInsung Park
Insung Park
SHSeungyong Hahn
Seungyong Hahn
We present design results of scalable superconducting quantum circuits using the flip-chip assembly. In order to achieve the longest relaxation time ( $T_{1}$ ) of a qubit possible, gap between two chips in flip-chip assembly is determined to be 12 μm where low surface dielectric loss from two-level system (TLS) defects can be achieved while maintaining large readout coupling strength between two chips in the flip-chip assembly. Superconducting transmon qubit design is then optimized to have a target anharmonicity of 200 MHz and to have the longer $T_{1}$ in consideration of surface energy participation ratios of TLS defects within the compact footprint. To achieve strong coupling strength but low qubit to qubit crosstalk (ZZ) for fast and high fidelity multi-qubit gates, direct coupler and compact multi-path coupler designs for coupling qubits are compared by numerically solving Hamiltonian of the coupled two qubits. Monte-Carlo simulation results on the yield rate of the extended circuits indicate that low manufacturing errors are required.

26 November 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GBGaël Berthet
Gaël Berthet
HPHyunsoo Park
Hyunsoo Park
IPInsung Park
Insung Park
WJWonseok Jang
Wonseok Jang
WJWonju Jung
Wonju Jung
SLSangjin Lee
Sangjin Lee
With the promises of nuclear fusion, an increasing number of fusion magnet projects are employing $\mathrm{(RE)Ba}_{2}\text{Cu}_{3}\mathrm{O}_{7-\updelta}$ (REBCO) tapes. These magnets often include multiple demountable joints, which typically incorporate low-temperature solder either in the joint itself or in the cable. Such solders usually contain elements that diffuse readily in copper, raising concerns about the aging effects. This study investigates the impact of the InterMetallic-Compound (IMC) growth on the joints properties through room-temperature aging and annealing. Eutectic indium-tin solder joints stored for nine months in a desiccator did not exhibit any significant change in their properties. Given the strong temperature dependence of the IMC growth, annealing at 100°C was performed to simulate long-term effects. After 6 to 8 days of annealing, critical current degradation was measured in all samples containing solder, indicating that the IMC had grown to the REBCO layer deteriorating it. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) analyses revealed that even after 20 days, solder elements reached the REBCO layer only in regions where the solder was abundant.

18 January 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
IPInsung Park
Insung Park
WOWon-Jae Oh
Won-Jae Oh
JLJae Hun Lee
Jae Hun Lee
SMSeung-Hyun Moon
Seung-Hyun Moon
SYSang-Im Yoo
Sang-Im Yoo
The phase stability of the GdBa$_{2}$Cu$_{3}$O$_{7}{\delta}$ (GdBCO) compound was carefully investigated for the nominal composition of Gd:Ba:Cu = 1:1:2.5 in low oxygen pressures (PO$_{2}$) of 1-150 mTorr. Since this composition has been employed for the fabrication of GdBCO coated conductors via the reactive co-evaporation deposition and reaction (RCE-DR) process, it is invaluable to accurately determine the phase stability of GdBCO for an optimal processing of RCE-DR. For this study, Gd-Ba-Cu-O amorphous precursor films were deposited on LaAlO$_{3}$ (001) substrates at 200°C by pulsed laser deposition (PLD). Using a reel-to-reel tube furnace, as-deposited amorphous films were annealed at various high temperatures in low PO$_{2}$. Experimental results reveal that the stability boundary of GdBCO for this composition is remarkably shifted to the lower temperature regions compared with that for the nominal composition of Gd:Ba:Cu = 1:2:3.

1 March 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
IPInsung Park
Insung Park
GKGwantae Kim
Gwantae Kim
HKHosup Kim
Hosup Kim
JKJeongtae Kim
Jeongtae Kim
HHHongsoo Ha
Hongsoo Ha
Accurate measurement of thickness holds significant importance during the fabrication of high-temperature superconducting (HTS) magnets using HTS wires. Despite its growing significance, a continuous measurement device for tracking HTS wire thickness remains elusive. When employing superconducting wire in applications like HTS magnets for generating high magnetic fields, it becomes crucial to precisely gauge the wire's thickness beforehand. This preemptive measurement minimizes deviations between the magnet's intended design specifications and the actual manufacturing process. Furthermore, HTS wires often exhibit non-uniform thickness not only along their length but also across their width, highlighting the need for a comprehensive solution. Hence, the imperative arises to devise a continuous measurement tool capable of accurately determining both thickness and shape for long-lengths of HTS wires. In this study, we propose a novel approach: a technology for measuring HTS wire thickness. This proposal utilizes a reel-to-reel transfer device in tandem with a confocal laser sensor to achieve continuous, precise measurement and transfer of lengthy HTS wires.