School of Human Development and Techno-communication (iKOM), Green Advanced Computing and Technology (GREAT) Research Group – CEGeoGTech, Universiti Malaysia Perlis (UniMAP
Auto-generated profile, based on publicly available information
Syed Zulkarnain Syed Idrus
School of Human Development and Techno-communication (iKOM), Green Advanced Computing and Technology (GREAT) Research Group – CEGeoGTech, Universiti Malaysia Perlis (UniMAP
Laboratory laboratories are essential to the education process in all fields of engineering, technology has changed the scientific laboratory landscape. The role of using Extended Reality (XR) technology after the COVID-19 pandemic is unprecedented, the virus had affecting almost all countries concurrently, resulting in an economic crisis, the education sector was the most affected as students could not go to the laboratory to conduct experiments due to the containment of the disease. From this point on, the use of virtual laboratories became a great and effective role for students and the university, as it cost little in the budget compared to the real laboratory. In this paper, the role of virtual laboratories, using extended reality technology, and its impact on education and the future of virtual training in increasing students’ efficiency will be discussed in this paper.
27 June 2018 in Journal of Physics: Conference Series
The bio-plastic composite has attracted the attention of people who work in academic and industrial fields due to the several advantages of this composite as compared with conventional plastic composites. However, the modification of the natural filler used in the bio-composites usually needs a modification before use. In the current work, the chemical modification on Cyperus Odoratus (CY) using different sodium hydroxide (NaOH) concentration at 1, 3, 6 and 9 wt.% were used to investigate the effect of this modification on the tensile properties of Polypropylene/Cyperus Odoratus (PP/CY) composites. The extrusion and injection molding processes were used respectively to prepare the composites. Results suggest that the presence of NaOH, particularly 3 wt.% has improved the tensile strength and the elongation at break of the composite. By contrast, the high NaOH concentration, particularly 9 wt.% has effected negatively on this properties. The tensile modulus increased linearly as NaOH concentration increased in the composites. The SEM micrograph of treated specimens at 3 wt.% NaOH shows improvement on CY surface while 9 wt.% NaOH shows deterioration on the DS surface.
27 June 2018 in Journal of Physics: Conference Series
This synthesis and characterization of slow release material from epoxidized natural rubber (ENR) and rice husks (RH) composites was conducted. The alkali modification of rice husks was carried using different NaOH concentration. ENR-50 and RH composites were analyzed by FTIR. Furthermore, the release behavior of the composites was invistigated using UV-visible spectroscopy. From the purified ENR-50, it can be characterized the peak epoxide group identified at 875 cm-1 and for the isoprene at 835 cm-1. For RH/urea beads, the CH2 peak of cellulose was obtained at 1457 cm-1. However, the CH2 is overlapped with cellulose at 1741 cm-1 and 1726 cm-1 that resulted for the partial opening of epoxide ring from carbonyl peak for hemi-cellulose and lignin, there are C=C stretching from aromatic group can be obtained at 1512 cm-1 and 1595 cm-1. The release of the composite at 7% NaOH concentration was higher than the composite at 1% NaOH concentration.
27 June 2018 in Journal of Physics: Conference Series
The utilization of biopolymers in the applications that meet demands in society for sustainability and environmental safety has been limited. That is owing to the poor mechanical and thermal properties of biopolymers. The goal of this study is to improve the limitations of the biopolymers properties. polylactic acid (PLA) as one of the most important biopolymer was selected to investigate the effect of incorporating of natural halloysites nanotubes HNTs with different concentrations (0–8 wt%) on PLA chemical and hydrophobic properties. In the second series, Zirconium dioxide (ZrO2) nanoparticles were added to the PLA/HNTs film with the optimum mechanical properties in the first series. the chemical structure and surface wettability were investigated for both of PLA/HNTs and PLA/HNTs-ZrO2 bionanocomposites. The addition of ZrO2 resulted in appearance of OH groups in the FTIR graph. In addition, the increasing of ZrO2 loading led to increase the hydrophobicity of the PLA nanocomposites.