16 June 2020 in IEEE Access
The continuous increase in the number of mobile and Internet of Things (IoT) devices, as well as in the wireless data traffic they generate, represents an essential challenge in terms of spectral coexistence. As a result, these devices are now expected to make efficient and dynamic use of the spectrum by employing Cognitive Radio (CR) techniques. In this work, we focus on the Automatic Modulation Classification (AMC). AMC is essential to carry out multiple CR techniques, such as dynamic spectrum access, link adaptation and interference detection, aimed at improving communications throughput and reliability and, in turn, spectral efficiency. In recent years, multiple Deep Learning (DL) techniques have been proposed to address the AMC problem. These DL techniques have demonstrated better generalization, scalability and robustness capabilities compared to previous solutions. However, most of these techniques require high processing and storage capabilities that limit their applicability to energy- and computation-constrained end-devices. In this work, we propose a new gated recurrent unit neural network solution for AMC that has been specifically designed for resource-constrained IoT devices. We trained and tested our solution with over-the-air measurements of real radio signals. Our results show that the proposed solution has a memory footprint of 73.5 kBytes, 51.74% less than the reference model, and achieves a classification accuracy of 92.4%.
9 November 2021 in IEEE Transactions on Vehicular Technology
Unmanned Aerial Vehicles (UAVs) are emerging as important users of next-generation cellular networks. By operating in the sky, UAV users experience very different radio conditions than terrestrial users, due to factors such as strong Line-of-Sight (LoS) channels (and interference) and Base Station (BS) antenna misalignment. As a consequence, the UAVs may experience significant degradation to their received quality of service, particularly when they are moving and are subject to frequent handovers. The solution is to allow the UAV to be aware of its surrounding environment, and intelligently connect into the cellular network taking advantage of this awareness. In this paper we present REgression and deep Q-learning for Intelligent UAV cellular user to Base station Association (REQIBA), a solution that allows a UAV flying over an urban area to intelligently connect to underlying BSs, using information about the received signal powers, the BS locations, and the surrounding building topology. We demonstrate how REQIBA can as much as double the total UAV throughput, when compared to heuristic association schemes similar to those commonly used by terrestrial users. We also evaluate how environmental factors such as UAV height, building density, and throughput loss due to handovers impact the performance of our solution.
1 February 2021 in Computer Communications
4 January 2023 in IEEE Access
Providing reliable connectivity to cellular-connected Unmanned Aerial Vehicles (UAVs) can be very challenging; their performance highly depends on the nature of the surrounding environment, such as density and heights of the ground Base Stations (BSs). On the other hand, tall buildings might block undesired interference signals from ground BSs, thereby improving the connectivity between the UAVs and their serving BSs. To address the connectivity of UAVs in such environments, this paper proposes a Reinforcement Learning (RL) algorithm to dynamically optimise the height of a UAV as it moves through the environment, with the goal of increasing the throughput or spectrum efficiency that it experiences. The proposed solution is evaluated in two settings: using a series of generated environments where we vary the number of BS and building densities, and in a scenario using real-world data obtained from an experiment in Dublin, Ireland. Results show that our proposed RL-based solution improves UAV Quality of Service (QoS) by 6% to 41%, depending on the scenario. We also conclude that, when flying at heights higher than the buildings, building density variation has no impact on UAV QoS. On the other hand, BS density can negatively impact UAV QoS, with higher numbers of BSs generating more interference and deteriorating UAV performance.
1 January 2022 in SSRN Electronic Journal
Providing reliable connectivity to cellular-connected UAV(unmanned aerial vehicle) can be very challenging; their performance highly depends on the nature of the surrounding environment, such as density and heights of the ground BSs (base stations). On the other hand, tall buildings might block undesired interference signals from ground BSs, thereby improving the connectivity between the UAVs and their serving BSs. To address the connectivity of UAVs in such environments, this paper proposes a RL (reinforcement learning) algorithm to dynamically adapt the height of a UAV as it moves through the environment, with the goal of increasing the throughput or spectrum efficiency that it experiences. The proposed solution is evaluated in two settings: using a series of generated environments where we vary the number of BS and building densities, and in a scenario using real-world data obtained from an experiment in Dublin, Ireland. Results show that our proposed RL-based solution improves UAV QoS (quality of service) by 6% to 41%, depending on the scenario. We also conclude that, when flying at heights higher than the buildings, building density variation has no impact on UAV QoS. On the other hand, BS density can negatively impact UAV QoS, with higher numbers of BSs generating more interference and deteriorating UAV performance.