28 December 2023 in IEEE Transactions on Instrumentation and Measurement
The lift-off effect is a widely occurring phenomenon in electromagnetic nondestructive testing. The change in lift-off distance influences the signal amplitude and the stability of detection signal. The effect has been relatively well studied in conventional eddy current testing and pulsed eddy current testing, but not in motion-induced eddy current testing. In this paper, the influence of magnetizer lift-off on the distribution and intensity of the motion-induced eddy current has been analyzed based on an analytical model. Then, a semi-analytical model is proposed for fast computation of defect signals. Based on the semi-analytical model and the finite element method, the influence of lift-off on defect signal has been comprehensively studied. The proposed semi-analytical model gives results similar to those obtained by finite element method, at the same time it extensively increases the computation efficiency. Finally, motion-induced eddy current testing experiments were performed with a high-speed rotating aluminum disk. The results show that the defect signal amplitude decreases exponentially with the increase of the probe lift-off, and it is a superimposing effect of the magnet lift-off and sensor lift-off.
24 May 2023 in IEEE Transactions on Instrumentation and Measurement
Speed measurement plays an important role in many measurement and control systems in industry. A simple and efficient speed measurement method for smooth conductive specimens based on motion-induced eddy currents is studied in this paper. The speed sensor consists of a magnet and a Hall element. When the conductor moves beneath the magnet, eddy currents are generated, which further generate a secondary magnetic field that is dependent on the moving speed of the conductor. The Hall element picks up this field to determine the relative speed between the conductor and the sensor. First of all, a 2D analytical model for the induced eddy currents and corresponding magnetic fields has been proposed by solving the Maxwell’s equations using spatial Fourier transforms. Then, the change in current density and magnetic field with conductor speed is analyzed using both the analytical model and the finite element method. Speed sensing experiments were conducted on a rotating conductive disk, the results showed good agreement with the proposed analytical model. Finally, specifications such as accuracy, repeatability, linearity, and resolution of the prototype sensor have been tested.