Soumya Joshi

Soumya Joshi

Auto-generated profile, based on publicly available information

Soumya Joshi

Department of Electrical and Electronics Engineering, Birla Institute of Technology and Science-Pilani, Hyderabad Campus, Hyderabad, Telangana, India

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 October 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
KGKhushi Gupta
Khushi Gupta
SBSrinivas M. B.
Srinivas M. B.
SJSoumya J
Soumya J
OPOm Jee Pandey
Om Jee Pandey
LINGA REDDY CENKERAMADDILINGA REDDY CENKERAMADDI
LINGA REDDY CENKERAMADDI
The demand for noncontact breathing and heart rate measurement is increasing. In addition, because of the high demand for medical services and the scarcity of on-site personnel, the measurement process must be automated in unsupervised conditions with high reliability and accuracy. In this article, we propose a novel automated process for measuring breathing rate and heart rate with mmWave radar and classifying these two vital signs with machine learning. A frequency-modulated continuous-wave (FMCW) mmWave radar is integrated with a pan, tilt, and zoom (PTZ) camera to automate camera steering and direct the radar toward the person facing the camera. The obtained signals are then fed into a deep convolutional neural network to classify them into breathing and heart signals that are individually low, normal, and high in combination, yielding six classes. This classification can be used in medical diagnostics by medical personnel. The average classification accuracy obtained is 87% with precision, recall, and an F1 score of 0.93.

15 January 2021 in Electronics
Verified
Journal Article
Open access
PDF file
ADAveen Dayal
Aveen Dayal
NPNaveen Paliru
Naveen Paliru
LINGA REDDY CENKERAMADDILINGA REDDY CENKERAMADDI
LINGA REDDY CENKERAMADDI
SJSoumya J.
Soumya J.
PYPhaneendra K. Yalavarthy
Phaneendra K. Yalavarthy
Hand gestures based sign language digits have several contactless applications. Applications include communication for impaired people, such as elderly and disabled people, health-care applications, automotive user interfaces, and security and surveillance. This work presents the design and implementation of a complete end-to-end deep learning based edge computing system that can verify a user contactlessly using ‘authentication code’. The ‘authentication code’ is an ‘n’ digit numeric code and the digits are hand gestures of sign language digits. We propose a memory-efficient deep learning model to classify the hand gestures of the sign language digits. The proposed deep learning model is based on the bottleneck module which is inspired by the deep residual networks. The model achieves classification accuracy of 99.1% on the publicly available sign language digits dataset. The model is deployed on a Raspberry pi 4 Model B edge computing system to serve as an edge device for user verification. The edge computing system consists of two steps, it first takes input from the camera attached to it in real-time and stores it in the buffer. In the second step, the model classifies the digit with the inference rate of 280 ms, by taking the first image in the buffer as input.

15 August 2021 in Electronics
Verified
Journal Article
Open access
PDF file
JBJyoti Bhatia
Jyoti Bhatia
ADAveen Dayal
Aveen Dayal
AJAJIT JHA
AJIT JHA
SVSantosh Kumar Vishvakarma
Santosh Kumar Vishvakarma
SJSoumya Joshi
Soumya Joshi
LINGA REDDY CENKERAMADDILINGA REDDY CENKERAMADDI
LINGA REDDY CENKERAMADDI
Radars with mmWave frequency modulated continuous wave (FMCW) technology accurately estimate the range and velocity of targets in their field of view (FoV). The targeted angle of arrival (AoA) estimation can be improved by increasing receiving antennas or by using multiple-input multiple-output (MIMO). However, obtaining target features such as target type remains challenging. In this paper, we present a novel target classification method based on machine learning and features extracted from a range fast Fourier transform (FFT) profile by using mmWave FMCW radars operating in the frequency range of 77–81 GHz. The measurements are carried out in a variety of realistic situations, including pedestrian, automotive, and unmanned aerial vehicle (UAV) (also known as drone). Peak, width, area, variance, and range are collected from range FFT profile peaks and fed into a machine learning model. In order to evaluate the performance, various light weight classification machine learning models such as logistic regression, Naive Bayes, support vector machine (SVM), and lightweight gradient boosting machine (GBM) are used. We demonstrate our findings by using outdoor measurements and achieve a classification accuracy of 95.6% by using LightGBM. The proposed method will be extremely useful in a wide range of applications, including cost-effective and dependable ground station traffic management and control systems for autonomous operations, and advanced driver-assistance systems (ADAS). The presented classification technique extends the potential of mmWave FMCW radar beyond the detection of range, velocity, and AoA to classification. mmWave FMCW radars will be more robust in computer vision, visual perception, and fully autonomous ground control and traffic management cyber-physical systems as a result of the added new feature.

20 April 2022 in IEEE Access
Verified
Journal Article
Open access
SJSamala Jagadheesh
Samala Jagadheesh
PBP. Veda Bhanu
P. Veda Bhanu
JSJ. Soumya
J. Soumya
LINGA REDDY CENKERAMADDILINGA REDDY CENKERAMADDI
LINGA REDDY CENKERAMADDI
Network-on-Chip (NoC) has emerged as the most promising on-chip interconnection framework in Multi-Processor System-on-Chips (MPSoCs) due to its efficiency and scalability. In the deep sub-micron level, NoCs are vulnerable to faults, which leads to the failure of network components such as links and routers. Failures in NoC components diminish system efficiency and reliability. This paper proposes a Reinforcement Learning based Fault-Tolerant Routing (RL-FTR) algorithm to tackle the routing issues caused by link and router faults in the mesh-based NoC architecture. The efficiency of the proposed RL-FTR algorithm is examined using System-C based cycle-accurate NoC simulator. Simulations are carried out by increasing the number of links and router faults in various sizes of mesh. Followed by simulations, real-time functioning of the proposed RL-FTR algorithm is observed using the FPGA implementation. Results of the simulation and hardware shows that the proposed RL-FTR algorithm provides an optimal routing path from the source router to the destination router.

24 November 2021 in Electronics
Verified
Journal Article
Open access
PDF file
KGKhushi Anil Gupta
Khushi Anil Gupta
SJSoumya Joshi
Soumya Joshi
MSM. B. Srinivas
M. B. Srinivas
Srinivas BoppuSrinivas Boppu
Srinivas Boppu
MMM. Sabarimalai Manikandan
M. Sabarimalai Manikandan
LINGA REDDY CENKERAMADDILINGA REDDY CENKERAMADDI
LINGA REDDY CENKERAMADDI
MmWave radars play a vital role in autonomous systems, such as unmanned aerial vehicles (UAVs), unmanned surface vehicles (USVs), ground station control and monitoring systems. The challenging task when using mmWave radars is to estimate the accurate angle of arrival (AoA) of the targets, due to the limited number of receivers. In this paper, we present a novel AoA estimation technique, using mmWave FMCW radars operating in the frequency range 77–81 GHz by utilizing the mechanical rotation. Rotating the radar also increases the field of view in both azimuth and elevation. The proposed method estimates the AoA of the targets, using only a single transmitter and receiver. The measurements are carried out in a variety of practical scenarios including pedestrians, a car, and an UAV, also known as a drone. With measured data, range-angle maps are created, and morphological operators are used to estimate the AoA of the targets. We also process radar range-angle images for improved visual representation. The proposed method will be extremely beneficial for practical ground stations, traffic control and monitoring frameworks for both on-ground and airborne vehicles.

27 October 2025 in Discover Computing
Verified
Journal Article
Open access
PDF file
JSJagadheesh Samala
Jagadheesh Samala
BMBindu Bhargavi Mekala
Bindu Bhargavi Mekala
SJSoumya J
Soumya J
Network-on-Chip (NoC) is a promising technology that uses a network of interconnected processing elements to improve performance and reduce communication costs in complex systems. However, faults can occur in NoC systems due to various factors such as manufacturing defects, aging, and environmental factors. To address this challenge, fault-tolerant techniques are necessary to ensure the reliable and efficient operation of NoC systems. One such technique is fault-tolerant application mapping, in which application cores are assigned to processing elements to reduce the system performance degradation caused by the failures. However, the application mapping for NoC systems, including fault tolerance, is a complex task. This paper presents a novel approach consisting of a transformer-based reinforcement learning algorithm for application mapping in mesh topology based NoC. This allows NoC to communicate efficiently in the presence of faults. The proposed approach is compared with other state-of-the-art techniques. The findings demonstrate that the proposed approach outperforms the average communication cost encompassing 2, 5, and 7 percent more than RL-MAP, NMA, and PSO, respectively, and also has less run-time. Also, it is observed that the introduced technique excels against the remaining techniques with respect to the average network latency decrease by 3, 5, and 6 percent for RL-MAP, NMA, and PSO correspondingly. The approach in this method is thus helpful in the design of NoC systems that are energy efficient as well as reliable for targeted applications.