4 October 2022 in IEEE Sensors Journal
The demand for noncontact breathing and heart rate measurement is increasing. In addition, because of the high demand for medical services and the scarcity of on-site personnel, the measurement process must be automated in unsupervised conditions with high reliability and accuracy. In this article, we propose a novel automated process for measuring breathing rate and heart rate with mmWave radar and classifying these two vital signs with machine learning. A frequency-modulated continuous-wave (FMCW) mmWave radar is integrated with a pan, tilt, and zoom (PTZ) camera to automate camera steering and direct the radar toward the person facing the camera. The obtained signals are then fed into a deep convolutional neural network to classify them into breathing and heart signals that are individually low, normal, and high in combination, yielding six classes. This classification can be used in medical diagnostics by medical personnel. The average classification accuracy obtained is 87% with precision, recall, and an F1 score of 0.93.
3 May 2018 in IEEE Transactions on Nanotechnology
Ternary logic circuits have advantage over the corresponding binary counterparts with respect to area and interconnect complexity. CNFET technology is ideal to implement ternary logic circuits because the threshold voltage of CNFETs depends on the physical dimensions of their channel. This work presents the methodology and implementation of ternary prefix adders using CNFETs. While the concept of carry Propagate-Generate is widely used in the implementation of binary prefix adders, same however cannot be directly applied in the implementation of ternary prefix adders. In this paper, a technique that enables the use of carry Propagate-Generate concept in multi-digit ternary adders, is proposed. Multi-digit ternary prefix adders, which use binary prefix trees for carry computation, are implemented using CNFETs. Five variants of CNFET-based multi-digit ternary adders, which use different prefix networks in carry computation, are implemented using HSPICE. Simulation results show that the proposed ternary prefix adders result in up to 58% reduction in average power consumption, 50% reduction in propagation delay and 80% reduction in Power-Delay Product (PDP), when compared to other CNFET-based ternary adders existing in the literature.
17 December 2022 in Journal of Ambient Intelligence and Humanized Computing
7 January 2022 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
In this article, an efficient architecture for a low-power, high-resolution flash analog-to-digital converter (flash ADC) is presented. It operates at 12-bit resolution with a sampling frequency of 1.1 GS/s. The architecture is a segmented one consisting of three subflash ADCs that we call SADC1, SADC2, and SADC3. During the operation, SADC1 detects the MSB bit, and SADC2 detects the intermediate bits, while SADC3 detects the finer bits of the flash ADC. Furthermore, SADC1 has a 1-bit resolution, SADC2 has a 6-bit resolution, and SADC3 has a 5-bit resolution. The binary operation related to 12-bit resolution is achieved by combining the subflash ADCs, thermometer digital outputs, and an encoder. The ADC has been fabricated in Global Foundry (GF) 65-nm standard CMOS process. The measured performance parameters show a differential nonlinearity (DNL) of ±0.24 LSB, an integral nonlinearity (INL) of ±0.45 LSB, a signal-to-noise and distortion ratio (SNDR) of 64.55 dB, a spurious-free dynamic range (SFDR) of 73.9 dB, and an effective number of bits (ENOB) of 10.43 bits. Also, power consumption is found to be 15.10 mW at 1.1-GS/s sampling frequency and 1.2-V supply voltage. The ADC achieves an FOM of 9.95 fJ/conversion-step (c-s) at the Nyquist input frequency and occupies a core area of 0.084 mm².