Flexible memory devices are promising for information storage and data processing applications in portable, wearable, and smart electronics operating under curved conditions. In this work, we realized high-performance flexible ferroelectric capacitors based on Hf0.5Zr0.5O2 (HZO) thin film by depositing a buffer layer of Al2O3 on polyimide (PI) substrates using atomic layer deposition (ALD). The flexible ferroelectric HZO films exhibit high remnant polarization (Pr) of 21 µC/cm2. Furthermore, deterioration of polarization, retention, and endurance performance was not observed even at a bending radius of 2 mm after 5,000 bending cycles. This work marks a critical step in the development of high-performance flexible HfO2-based ferroelectric memories for next-generation wearable electronic devices.
15 March 2018 in Journal of Applied Polymer Science
Oil-impregnated paper is a major type of insulation in oil-filled power transformers. In converter transformers, windings connected with converter valves have to withstand AC and DC combined voltages. This paper presented the experimental research on electrical breakdown properties of oil paper insulation under AC-DC combined voltages. Electrical breakdown strength of oil-paper insulation specimens was measured through short-time tests under AC, DC, and AC-DC combined voltages. The combined voltages consisted of two different ratios of the AC to DC voltages. Through the constant stress tests, the times-to-breakdown of oil-paper specimens were measured. Weibull parameters of the times-to-breakdown of specimens were estimated and the inverse power and exponential failure models of the specimens were presented.
ZrO 2 -based resistive random access memory devices composed of a thin Cu doped ZrO 2 film sandwiched between an oxidizable top electrode and an inert bottom electrode are fabricated by e-beam evaporation at room temperature. The devices show reproducible nonpolar resistive switching. The formation and annihilation of localized conductive filaments is suggested to be responsible for the resistive switching characteristics according to a series of convincing evidences. Temperature-dependent resistive switching behaviors show that a metallic conductive channel is responsible for the low resistance state. Further analysis reveals that the physical origin of this metallic channel is the nanoscale Cu conductive filament. The metal filaments are observed by TEM and the component is also confirmed. We propose that the set and reset process stem from the thermal effect assisted electrochemical reactions.