24 September 2025 in Nuclear Fusion
The International Fusion Materials Irradiation Facility-DEMO Oriented Neutron Source (IFMIF-DONES) is designed mainly to test and qualify materials for future fusion reactors by exposing them to a high energetic and intense neutron flux, and also to develop other scientific experiments using a fraction of the neutrons generated. The Lithium Systems (LSs) are crucial to the operation of the facility, generating and delivering the neutron flux through the interaction of a deuteron beam with a flowing lithium target. It comprises four systems: the Target System that produces the stable high-velocity lithium flow target and handles the substantial heat load from the beam interaction; the Heat Removal Loops, designed to supply the liquid lithium to the target in adequate conditions, this removing up to 10 MW through primary lithium loops and secondary and tertiary oil and water loops; the Impurity Control System, which controls the contents of impurities in the lithium, to reduce corrosion and erosion phenomena, and localize the radioactive impurities; and the LS Ancillaries, providing essential support such as vacuum, gas, and electrical power to the other systems. The design and operation of the LSs face several significant challenges. Maintaining the stability and high velocity of the lithium flow under extreme conditions is of paramount importance. Operating in a high-radiation environment presents additional complexities, requiring the development of specialized maintenance strategies in conjunction with remote handling technologies. The design of the IFMIF-DONES LS has evolved over the last years. This paper presents the current design status, highlighting the solutions implemented to address these challenges and to ensure the reliable and safe operation of the facility.
24 September 2025 in Nuclear Fusion
International Fusion Materials Irradiation Facility—DEMO Oriented Neutron Source (IFMIF-DONES) will be a unique facility dedicated to the irradiation of fusion materials by means of a high neutron flux, with a spectrum comparable to the one expected in the first wall of fusion reactors. Due to the moderate seismicity in southern Spain, the IFMIF-DONES project needs to pay careful attention to the seismic safety and the protection of the machine. The seismic strategy developed for the facility follows the graded approach for seismic design defined by the International Atomic Energy Agency (IAEA), which is consistent with the relatively small radiological/toxicological hazard of the installation and commensurate to its singularity. A comprehensive approach is presented, this encompassing every stage of the seismic design and assessment of the facility. It covers the seismic hazard analysis for the site, including consideration of site effects, the definition of design and beyond design basis earthquakes, the definition of operational earthquakes, the seismic analysis of the Main Building, which will house most of the critical components, and the fragility analysis and seismic margin assessment to demonstrate robustness for the beyond design basis earthquake. This paper provides an overview of the seismic safety strategy now being applied in the IFMIF-DONES Project.
1 January 2022 in Journal of Instrumentation
Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the LHC. Several issues with the TDI were encountered during LHC operation, most of them due to outgassing from its core components induced by electron cloud effects, which led to limitations of the injector intensity and hence had an impact on LHC availability. The absorbing cores of the TDIs, and of beam intercepting devices in general, need to deal with high thermo-mechanical loads induced by the high intensity particle beams. In addition, devices such as the TDI — where the absorbing materials are installed close to the beam, are important contributors to the accelerator impedance budget. To reduce impedance, the absorbing materials that make up the core must be typically coated with high electrical conductivity metals. Beam impact testing of the coated absorbers is a crucial element of development work to ensure their correct operation. In the work covered by this paper, the behaviour of several metal-coated absorber materials was investigated when exposed to high intensity and high energy proton beams in the HiRadMat facility at CERN. Different coating configurations based on copper and molybdenum, and absorbing materials such as isostatic graphite, Carbon Fibre Composite (CfC) and Silicon Carbide reinforced with Silicon Carbide fibres (SiC-SiC), were tested in the facility to assess the TDI's performance and to extract information for other BIDs using these materials. In addition to beam impact tests and an extensive Post Irradiation Examination (PIE) campaign to assess the performance of the coatings and the structural integrity of the substrates, extensive numerical simulations were carried out.
20 June 2024 in Nuclear Materials and Energy
IFMIF-DONES is a facility under construction in Granada, whose main goal is the validation and characterization of materials under a fusion prototypic irradiation field. This field is created by the interaction of a high energy intense continuous deuteron beam and a flowing liquid lithium target. The requirements imposed on the beam at the interaction point are a complex trade-off among the scientific experimental needs for the materials irradiation defined at the top-level requirements (20 dpa in a volume of 0.3 dm3 and 50 dpa in 0.1 dm3), and the technical constraints of several systems such as the Accelerator Systems, the Lithium Systems, and the Test Systems. Recent simulations with the initial definition of beam-on-target requirements showed the necessity of redefining them in order to fulfill the irradiation needs. This contribution will address the main challenges to gather the inputs for the definition and reassessment of the beam-on-target requirements. A comparison detailing the main changes compared to the previous ones will be given, together with a short overview of the studies ongoing by different systems to analyze the impact of each beam-on-target requirements on the performance of the whole facility.
27 June 2025 in Bulletin of Earthquake Engineering
2 July 2024 in Fusion Engineering and Design