Slow-wave structure (SWS) is a core part of a traveling-wave-tube (TWT) amplifier. In this letter, the planar microstrip meander SWS on a dielectric substrate at V-band (50-70 GHz) is studied. The basic electromagnetic parameters of the SWS are calculated. The SWS circuits are designed and fabricated, and good transmission characteristics are measured. The SWS developed is characterized by a wide bandwidth and a relatively-large slow-wave factor, and is suitable for a low-voltage TWT with the sheet electron beam.
1 October 2016 in Colloids and Surfaces B: Biointerfaces
We report the results of the design, simulation, fabrication, and cold-test measurements of millimeter-band 2D planar microstrip slow-wave structures (SWSs) on dielectric substrates. Such structures have a high slow-wave factor, which allows for low-voltage operation and reduction in the size and weight of the device. A low-cost and flexible fabrication technology based on magnetron sputtering and subsequent laser ablation has been developed and is reported in the paper. Microstrip meander-line SWS circuits at V-, W-, and D-bands have been fabricated and characterized. The fabrication of ring-bar planar SWSs by the photolithographic method is also discussed. Experimental measurement of S-parameters of the fabricated structures reveals good transmission properties. Return loss (S11) does not exceed −10 dB and attenuation is about 2 dB/cm in the V-band, 10 dB/cm in the W-band, and 8.5 dB/cm in the D-band.
1 May 2019 in Materials Science and Engineering: C
CaCO3 carriers are efficiently loaded with Griseofulvin antifungal drug (25% w/w). Stabilizing coating formation prolongs the carrier degradation and payload release. The proposed system enables delivery to hair follicles and bioavailability enhancement for Gf.
Inorganic halides perovskite CsPbX3 (X = Cl, Br, and I or mixed halide systems Cl/Br and Br/I) nanoparticles are efficient light-conversion objects that have attracted significant attention due to their broadband tunability over the entire visible spectral range of 410–700 nm and high quantum yield of up to 95%. Here, we demonstrate a new method of recrystallization of CsPbBr3 nanoparticles inside the electrospun fluoropolymer fibers. We have synthesized nonwoven tetrafluoroethylene mats embedding CsPbBr3 nanoparticles using inexpensive commercial precursors and syringe electrospinning equipment. The fabricated nonwoven mat samples demonstrated both down-conversion of UV light to 506 nm and up-conversion of IR femtosecond laser radiation to 513 nm green photoluminescence characterized by narrow emission line-widths of 35 nm. Nanoparticle formation inside nonwoven fibers was confirmed by TEM imaging and water stability tests controlled by fluorimetry measurements. The combination of enhanced optical properties of CsPbBr3 nanoparticles and mechanical stability and environmental robustness of highly deformable nonwoven fluoropolymer mats is appealing for flexible optoelectronic applications, while the industry-friendly fabrication method is attractive for commercial implementations.