16 April 2024 in IEEE Sensors Journal
Surface Acoustic Wave (SAW) devices have long been recognized as proficient sensors, capable of detecting an array of chemical and physical parameters. These range from the identification of gas type and concentration, the intensity of ultraviolet light, fluctuations in temperature, and changes in relative humidity. Historically, delay line model SAW devices have been the preferred choice for these sensor applications due to their proven reliability and broad versatility. However, recent advancements have paved the way for the development of one-port SAW resonators, which offer several compelling benefits. These devices are characterized by their relatively compact size and superior sensitivity compared to their delay line counterparts. Such attributes make them appealing for implementation in a variety of sensing applications. However, the transition to these novel devices has not been without challenges. One significant hurdle has been maintaining the original performance of these devices following their integration with a sensing film. In addition, the device is typically not suitable in high temperature condition which limits the implementation for environmental sensor. Researchers have been trying to address these issues and leveraging the inherent advantages of these devices. This comprehensive review serves to provide an in-depth analysis of the state of one-port SAW resonators. The paper delves into current trends and offers detailed insights into their design and fabrication methodologies. Additionally, it explores their implementation as sensors, discussing both the successes and ongoing challenges associated with their use. The paper also highlights the potential opportunities and advancements that one-port SAW resonators could bring to the field of sensor technology.
15 November 2023 in IEEE Sensors Letters
We investigated the mass loading effect caused by a thin polymer film attached only on the reflector electrodes of a one-port surface acoustic wave (SAW) resonator and explored the possibility of devising low-loss SAW sensors. One-port SAW resonators have a miniaturized device footprint and are well known for their high unloaded quality factor (Q). However, despite these advantages, they are less popular for sensing applications than other types of SAW devices due to insufficient space on the device surface for coating a sensing medium without affecting the stability of the resultant sensor response. Accordingly, we fabricated typical one-port SAW resonators operating at the resonant frequency of ∼130 MHz and patterned positive photoresist (considered as typical sensing film) only onto the reflector electrodes. It was observed that mass loading of the film on the device reflectors shifted the resonant frequency ( f 0 ) of the main cavity resonance towards the resonant frequency of the interdigital transducer ( f IDT ) to allow more acoustic wave energy from the IDT to contribute towards exciting the main cavity resonance. The relatively lower mismatch between f 0 and f IDT of the resonator composed of polymer thin film-coated reflectors overcame the viscous damping of SAW contributed by the intrinsic loss in the polymer to increase the Q of the film-coated resonator. The resultant humidity sensor demonstrated a sensitivity of 155.6 Hz/% RH with good repeatability.
27 January 2025 in IEEE Sensors Letters
We report a near-field communication (NFC)-enabled quartz crystal microbalance (QCM)-tag instrumentation suitable for wireless mass loading sensing applications. The proposed instrumentation utilizes a low-power microcontroller-based Pierce oscillator frequency counter system to measure series resonance frequency $(f_{0})$ of the QCM over a time period. The system was able to record the change in $f_{0}\,(\Delta f)$ caused by mass loading to the NFC's electrically erasable programmable read-only memory. The $f_{0}$ measured using the proposed system was then validated against impedance analyzer measurement, and the maximum error was measured to be 0.0004%. An Android application was then developed to read log $f_{0}$ using a smartphone. Further, we demonstrated wireless measurement of the mass loading rate of a dc sputtering system, a well-known vacuum deposition technique adopted in semiconductor process industries. Accordingly, the proposed system is an inexpensive plug-and-play solution for real-time wireless in-situ measurement of mass loading changes in sealed chambers or hazardous environments where manual measurement or wired measurement is difficult.
4 January 2023 in IEEE Transactions on Instrumentation and Measurement
In this work, the well-known scattering matrix approach to design of one-port SAW resonators is adapted towards extraction of the coupling-of-modes (COM) attenuation parameter, α for Rayleigh SAW propagation on a periodic shorted aluminium grating. The attenuation close to resonance inside the reflectors of the one-port SAW resonator is extracted by matching the measured conductance of the resonator to its version calculated from the experimentally measured IDT scattering coefficients, intrinsic substrate parameters and geometry of the resonator. Based on the extracted value of α, it was observed that the proposed method could predict the unloaded Q-factor of the resonator at a minor discrepancy of ~7.02%. At the same time, since the proposed method utilizes the measured IDT scattering coefficients to consider the effect of IDT losses on the measured conductance of the resonator, it offers a convenient scheme to directly extract the attenuation of SAW contributed by the reflectors of the device through numerical means while operating purely in the frequency domain. The proposed method could be applied to quantify the increase in attenuation caused by viscous damping of SAW inside sensing film-coated reflectors of one-port SAW resonator sensors and thereby, aid to optimize the sensing film thickness to deploy these devices for high-resolution frequency-based sensing applications.
6 November 2025 in IEEE Sensors Journal
We report a near-field communication (NFC)-enabled quartz crystal microbalance (QCM) sensor, capable of functioning in the batteryless and wireless mode. The proposed sensor is used in a closed humidity chamber for the observation of changes to humidity over time. The proposed instrumentation utilizes a low-power microcontroller-based pierce oscillator frequency counter system to measure the series resonance frequency ( $f_{0}$ ) of the QCM over a time period and transmit the data to the external NFC antenna. The $f_{0}$ measured using the proposed system was then validated against impedance analyzer measurement and the maximum error was measured to be 0.006%. As such, the proposed system is an inexpensive, plug-and-play option for sensing measurements in closed, difficult to access locations or instruments, functioning indefinitely without requirement of recharging, greatly increasing service and maintenance intervals.
1 September 2026 in IEEE Sensors Journal