To ensure the voltage-balancing capability of the cascaded H-bridge multilevel rectifier (CHMR), the voltage-balancing space vector pulsewidth modulation (VB-SVPWM) is constructed by combining the minimum energy characteristic. However, the existing voltage balancing modulation strategy could fail under extreme conditions of unbalanced cell loading or when some cells are unloaded due to failure. The power transfer limitations of the sub-cell terminals determine the voltage balancing boundary (VBB) for the VB-SVPWM under several load scenarios. Extension methods are also considered for situations out of this VBB. Following the theoretical derivation and the relationship between the number of no-load cells, the load unbalance index, the number of cascaded cells, the modulation index, and the power factor, a wider VBB can be reconstructed by modifying these above variables. Simulations and experiments are conducted with a three-level, three-cell cascaded rectifier to validate the VBB of the proposed VB-SVPWM and its expansion.
High speed and heavy loads have become more prevalent in the traction power supply system recently. To ensure system operating stability, better power quality, and sufficient power capacity, improvements are needed over the conventional traction system. Inspired by the concept of a microgrid (MG), an AC co-phase traction MG system was proposed. Substations were connected to the traction grid as distributed generators operate in islanded mode. Droop control was adopted as the primary control to stabilize the system’s operating frequency and voltage. Considering the operating features of the substation and locomotive load, a de-centralized secondary control strategy was proposed for AC co-phase traction MG system operation with enhanced resiliency. The proposed control strategy could increase system stability and prevent circulation currents between substations. Moreover, the proposed de-centralized coordination between substations does not rely on communication, which promotes the system’s “plug-and-play” functionality. Stability analysis was undertaken and the proposed controller was proved to be exponentially stable. The dynamic response of the proposed controller was validated using comprehensive case studies in MATLAB/Simulink.