1 January 2014 in IET Science, Measurement & Technology
The subject of this study is a frequency estimation algorithm suitable for grid‐connected power converters placed at a weak coupling point of a three‐phase electrical distribution system. An upgraded version of the widely used complex least mean squares (CLMS) algorithm for frequency estimation is introduced to cope with different voltage amplitude unbalance and harmonic distortion levels, both frequently present in power system at distribution level. First, it is suggested that the CLMS algorithm uses only a positive phase‐sequence component of voltage vector, the component that is inherently symmetrical and by cancelling the phase unbalance preserves the circular vector trajectory in a two‐phase αβ ‐plane. This study shows that it is even possible to use the positive voltage phase‐sequence vector extracted using a constant delay block, thus avoiding potential instability issues in the case of signal frequency feedback loop. Second, possible high signal harmonics and signal measurement noise are both removed using low‐pass filters prior to CLMS algorithm deployment. Computer simulations and experiments are performed under a variety of conditions to validate the effectiveness of the proposed technique. Experimental results are achieved using the dataset sampled from the actual three‐phase grid voltage at distributed level and with data processing done in the LabVIEW software environment .
16 October 2019 in IEEE Transactions on Industrial Electronics
1 January 2016 in Advances in Electrical and Computer Engineering
In this paper, a generalized particle swarm optimization (GPSO) algorithm was applied to the problems of optimal control of high speed low cost interior permanent magnet motor (IPMSM) ...
5 January 2015 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Purpose: – The purpose of this paper is to present a detailed advanced dynamical model of induction machine (IM) with unskewed rotor bars, including rotor slot harmonics. Design/methodology/approach: – Procedure of IM modeling using results from finite element analysis (FEA). Series of magneto-static FEA simulations are used to obtain matrix of IM inductances as a function of rotor angular position and geometry. Each element in this matrix is represented by Fourier series (FS) and incorporated in proposed dynamical model. Using or neglecting various elements in FS of inductance matrix may be useful for determining which component of the series has dominant influence on harmonic content of stator currents, torque ripple or speed variation. The usefulness of application of presented model is verified comparing with time-stepping FEA simulations. Findings: – Although the model is not suitable for usage in on-line regulation of IM drives, but the results of simulations may be used to thoroughly explain origins of higher order harmonics in stator currents of IM and help improve sensorless speed estimation algorithms and fault diagnostics. Originality/value: – This paper shows an approach to the modeling of IM which includes effects of non-uniform air gap and non-sinusoidal distributions of magneto-motive forces. Inductance matrix elements are complex functions of rotor position, geometry and winding distributions and it gives an opportunity for detail analysis of IM behavior in numerous applications.
14 April 2025 in IEEE Transactions on Industrial Electronics
This article introduces an innovative integrated shaft-sensorless control strategy for a permanent magnet assisted synchronous reluctance motor (PMa-SynRM) for fan and pump applications. The strategy is designed to optimize start-up performance by addressing key shaft-sensorless challenges, including initial rotor position estimation, robust starting and low-speed field oriented control (FOC). To determine the initial rotor position and magnet orientation, a combination of rotor parking method that utilizes a low dc current and brief high-frequency (HF) voltage injection is proposed, taking advantage of inherent asymmetrical rotor parking positions of PMa-SynRM. By this, application of high opposite current pulses for weak magnet polarity detection is avoided. Sensorless FOC close to zero speed is achieved by combining HF test signal injection and integration-free extended electromotive force (EEMF) algorithm with phase-locked loop upgraded with the newly proposed EEMF boost. The proposed strategy also incorporates new optimal torque control strategy with unity gain and minimal copper losses, enhancing dynamic torque production for rapid startup from zero speed. Experiments on low-cost PMa-SynRM sensorless drive designed for pump application demonstrate the effectiveness of the proposed strategy.