State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic Engineering, Huazhong University of Science and Technology Wuhan People's Republic of China
Auto-generated profile, based on publicly available information
Jinghan Yang
State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic Engineering, Huazhong University of Science and Technology Wuhan People's Republic of China
A plasma loss to sidewall model is used for one-dimensional (1D) particle-in-cell (PIC) with Monte Carlo collision (MCC) simulation to calculate plasma transport through a transverse magnetic field in a negative ion source chamber. The presented 1D model includes plasma radial loss treatment when calculating the plasma transport in the axial direction. It does not cost computation effort as much as a 2D or 3D model and can be used to estimate the plasma transport process quickly. The conventional 1D kinetic model calculates particle motion only in the ‘x’-direction. The sidewall loss in the ‘y’ ‘z’ direction is not included, leading to unusual plasma distribution. Especially when applying a transverse magnetic field, the motion and loss of electrons along the magnetic field line to the sidewall are ignored. Thus electrons are completely constrained by the magnetic field, resulting in abnormal plasma density accumulation. The sidewall loss estimation method uses Bohm velocity calculated from plasma parameters as radial loss velocity to obtain the plasma flux to the sidewall. And the sidewall loss rate can be obtained from the flux combined with chamber geometry. This method is integrated into a self-developed 1D PIC–MCC program to examine its effect. Several verification cases are performed separately for the PIC, MCC, and the sidewall loss treatment module, and the results exhibit good reliability. Simulations are then carried out to study plasma transport across the magnetic field under similar conditions to actual experiments. Simulation results agree with the experiment, which indicates that the 1D sidewall loss model is useful when dealing with plasma transport in the source chamber.
7 July 2024 in International Journal for Numerical Methods in Engineering
A radio-frequency driven negative hydrogen ion source is under development at Huazhong University of Science and Technology, which aims to investigate the physics of production and extraction of negative ions. The source operational parameters are investigated to investigate the source plasma characteristics and to optimize the extraction properties before cesium injection, which means, in this study, that negative ions were mostly produced by reactions in the plasma volume. The magnetic filter field generated by a plasma grid (PG) current flowing through the PG can cool down the electron temperature below 1 eV, but simultaneously increased the plasma density in the extraction region. The plasma asymmetry in the direction perpendicular to the PG filter field, is discussed and compared with that in other ion sources. As the PG current increased, the asymmetry factors tended to increase first and then decrease. Biasing the PG positively with respect to the source body can reduce the co-extracted electrons effectively, resulting in reducing the electron to H− ion current ratio. An extracted negative beam with a current density of about 19 A m−2 and an energy of 12 keV was achieved under 20 kW RF power and 0.3 Pa filling pressure, with a ratio of electron current to ion current of about 54.
Optical emission spectroscopy (OES) is an important noninvasive diagnostic tool for providing insight into the plasmas of the negative ion sources. The plasma spectroscopic characterization of the RF driven negative ion source at Huazhong University of Science and Technology (HUST) is studied with the delivered power from 6 kW to 16 kW. The gas temperature, electron temperature, electron density and the density ratio of atomic hydrogen to molecular hydrogen are extracted from OES. The gas temperature is estimated from the Fulcher band of H2. A global thermal model is developed to investigate the gas heating mechanisms in hydrogen plasmas. The gas temperature calculated by the model using the electron density and electron temperature from OES as input parameters is in good agreement with that from the experiment. The thermal model shows that the dissociation of molecular hydrogen by electron impact is the dominant source of gas heating and that approximately 11% ∼12% of the delivered power is dissipated in gas heating at 0.3 Pa filling pressure. Moreover, the electron temperature, electron density and the ratio of atomic to molecular density are obtained from the absolute intensity of Balmer lines and Fulcher band by using collisional radiative (CR) models of H and H2. The kinetics of the excited states of H are also discussed.