26 July 2019 in Nanomanufacturing and Metrology
1 January 2019 in CIRP Annals
4 April 2019 in Optics Express
A novel approach named off-spindle-axis (OSA) spiral grinding for fabricating aspheric microlens array (AMLA) mold inserts for precision glass molding (PGM) is presented. In OSA spiral grinding, three translational motions of the grinding wheel are synchronized with the rotation of the workpiece to form a local spiral wheel path for individual lens-lets. With this approach, the form accuracy of lens-lets can be compensated within sub-micrometer by means of the on-machine measurement. The determination of wheel path and form error compensation via on-machine measurement are systematically studied. A tungsten carbide mold insert with four convex aspheric lens-lets is fabricated to evaluate the grinding performance. PGM experiments are performed to produce glass AMLA using the ground insert. The experimental results indicate that both the ground and molded AMLA with homogeneous quality are achieved. The form accuracy and surface roughness of both the mold insert and the molded AMLA were less than 0.3 µm in PV and 10 nm in Sa, respectively.
1 July 2021 in Journal of Manufacturing Processes
11 February 2019 in Optics Express
Precision glass molding technology is one of the most important approaches to produce optical glass lenses. However, the high fidelity and repeatability of optical performance be sometimes achieved even though the lenses meet the requirements of geometric assessments. The surface errorform errors transferred from mold surface with a complicated combination of components of different spatial-frequencies greatly influence the optical lenses performance. An optical model is built to investigate the impact of form errors with various frequencies on the optical performance of the lens. The mid-spatial frequency error is proved to be the factor that results in the most serious surrounding circle phenomenon. Based on the diffraction theory of the sinusoidal grating, numerical calculation is carried out to analyze their relationship. Experiments are conducted to validate the analysis and a mold polishing procedure is provided as a method to improve the quality of lenses according to performance evaluation.
2 December 2020 in Optics Express
Slow tool servo diamond turning has widespread application in fabricating freeform optics. Previous studies are focused on the methods of the tool path generation and verification of zero-rake-angle tools. However, these methods are unsuitable for non-zero-rake tools that are used for machining hard-and-brittle materials. This paper presents a universal location-point-drive tool path generation method, which caters to arbitrary rake angle tools and the steady X movement feature, and the corresponding universal tool interference check method. Systematic analysis and ultra-precision machining experiments confirmed the feasibility of our methods and present better surface quality and form accuracy compared to the traditional method.