8 May 2015 in ACS Applied Materials & Interfaces
12 July 2013 in Nanotechnology
Self-assembling block copolymers generate nanostructured patterns which are useful for a wide range of applications. In this paper we demonstrate the capability to control the morphology of the self-assembling process of PS-b-PMMA diblock copolymer thin films on unpatterned surfaces by means of fast thermal treatment performed in a rapid thermal processing machine. The methodology involves the use of radiation sources in order to rapidly drive the polymeric film above the glass transition temperature. Highly ordered patterns were obtained for perpendicular-oriented cylindrical and lamellar PS-b-PMMA block copolymers in less than 60 s. This approach offers the unprecedented opportunity to investigate in detail the kinetics of the block copolymer self-assembly during the early stages of the process, providing a much deeper understanding of the chemical and physical phenomena governing these processes.
15 February 2008 in Journal of Applied Physics
Anatase films are grown on Si (100) by atomic layer deposition. Three different interlayers ( , , and Ti-rich ) between the films and the Si substrate have been considered. The band alignment of the titanium oxide films with the silicon substrate is investigated by x-ray photoelectron spectroscopy (XPS), internal photoemission (IPE) spectroscopy, and optical absorption (OA) measurements. XPS analysis indicates that heterojunctions with different interlayers (ILs) have different valence-band offsets (VBOs). A VBO value of is obtained for the -rich sample. Similarly, we obtain a VBO value of and for the and samples, respectively. According to IPE and OA measurements, the band gap of the as-grown films is for all the samples. Combining the XPS and IPE data, the conduction band offset values at the heterojunction are found to be , , and for the , -rich , and samples, respectively. According to our experimental results, the band alignment of a film with the underlying Si (100) substrate is clearly affected by the presence of an IL, suggesting the possibility to tune the band structure of a heterojunction by selecting the proper IL.
7 May 2014 in ACS Applied Materials & Interfaces
1 September 2011 in Journal of Applied Physics
The determination of the valence band offset (VBO) by x-ray photoelectron spectroscopy (XPS) is commonly performed using the so-called Kraut’s method that was developed for VBO determination in semiconductor/semiconductor heterojunctions. Although the physical model, which is the basis of the method, can be safely extended to dielectric/semiconductor (D/S) heterojunctions, in these systems a careful evaluation of the experimental results is necessary due to the differential charging phenomena originating at D/S interface during x-ray bombardment. As a consequence, precise determination of the VBO requires an accurate calibration of the energy scale in order to remove artifacts induced by the progressive charging of the oxide during the XPS measurement. In this work a detailed analysis of the band alignment between e-beam evaporated amorphous HfO2 films and Si substrates is reported. The HfO2/Si heterojunction was selected as a prototype for this study since HfO2 based dielectrics have already been implemented as gate dielectrics in real devices and have been the subject of a wide number of publications providing controversial results in terms of VBO values. A clear dependence of the binding energy of the Hf 4f and O 1s core lines on the thickness of the HfO2 film is identified. The time evolution of these signals indicates that different steady states are reached after prolonged x-ray bombardment depending on the thickness of the HfO2 films. On the basis of the original work of Iwata et al. [J. App. Phys. 79, 6653 (1996)], a rigorous method to remove these artifacts and empirically determine the real band offsets in D/S heterojunctions is proposed and validated by comparison with internal photoemission and photoconductivity data obtained on the same set of samples.