The article presents a differentially excited low temperature co-fired ceramics (LTCC) based miniaturized planar aperture antenna, distinguished for its high gain and narrow-beam wideband characteristics, tailored specifically for mm-Wave antenna-in-package (AiP) applications. The proposed antenna comprises a stepped-cut patch element excited differentially and enclosed within an open cavity formed by metallized vias. Four tuning stubs are symmetrically incorporated into the stepped-cut patch element, and two pairs of shorting vias are used to ground it, improving overall impedance and gain bandwidth. Rectangular-shaped parasitic strips, strategically positioned outside the open cavity in a symmetrical arrangement, significantly narrow the main beam along two principal cutting planes, thereby enhancing broadside gain across the entire frequency band of operation. To validate the proposed design, a miniaturized and low loss differential feeding network was designed using the same LTCC technology and seamlessly integrated into the underside of the prototype antenna. According to measured results, the fabricated prototype exhibit – 10 dB impedance bandwidth of 20.97 % (56.55–69.8 GHz), and the realized gain is higher than 10.01 dBi with a peak gain of 12.36 dBi at 63 GHz. Moreover, the radiation pattern of the proposed design is perfectly symmetrical, boasting a half-power beamwidth less than 40° along both the planes across the entire operating band.
31 March 2025 in The Journal of Korean Institute of Electromagnetic Engineering and Science
A novel compact, high-gain, narrow-beam, broadband magnetoelectric (ME) dipole antenna is proposed for 60 GHz antenna-in-package (AiP) applications, specifically designed for ultra-high-speed, short-range communication. Initially, a ME dipole antenna was designed utilizing a high-permittivity single substrate layer, achieving significantly high gain, a narrow beam, and broad reflection bandwidth. Subsequently, a compact, low-loss substrate-integrated- waveguide (SIW) based differential power divider was developed on a low-permittivity substrate for effective integration and excitation of the proposed antenna in measurements. According to the measurement data, the antenna achieves a broad impedance bandwidth (IBW) of 25.2% (54.2–69.8 GHz) for \boldmath $|S_{11}|< $ –10 dB, with an ultra-narrow half-power beamwidth (HPBW) of less than 40$^\circ$ and remarkably high realized gain that ranges from 9.64 dBi to a peak value of 14.33 dBi. Furthermore, the antenna exhibits minimal cross-polarization, and a perfectly symmetrical radiation pattern, all attributed to its innovative complementary design.
1 November 2025 in AEU - International Journal of Electronics and Communications
This paper presents a compact dual circularly polarized (CP) stacked‐patch antenna and a corresponding sequentially rotated 4 × 4 array for S‐band satellite communication applications. The driven patch is excited through two orthogonal H‐shaped slots that couple energy from the feedline, while a parasitic patch placed above the driven patch and separated by an airfoam spacer enhances the impedance bandwidth and radiation performance. A planar branch‐line hybrid coupler provides quadrature‐phase excitation to the aperture slots, enabling LHCP or RHCP operation through selective port excitation. The fabricated antenna exhibits measured −10 dB impedance bandwidths of 26.95% and 23.26% for Port 1 and Port 2, respectively, with a 3 dB axial‐ratio bandwidth spanning 1.90–2.40 GHz and a peak realized gain of 7.0 dBic, covering both the S‐band downlink (1.98–2.01 GHz) and uplink (2.17–2.20 GHz) frequency bands. The corresponding dual‐CP 4 × 4 array maintains active reflection coefficients below −10 dB at broadside and during beam scanning up to 30°, while preserving stable circular polarization, low sidelobe levels, and high realized gain. These results demonstrate a compact, array‐compatible dual‐CP antenna solution offering wide bandwidth, high polarization purity, and reliable beam‐scanning performance for modern S‐band satellite communication systems.