Satish Pujari

Satish Pujari

Auto-generated profile, based on publicly available information

Satish Pujari

Department of Mechanical Engineering Rise Krishna Sai Prakasam Group of Institutions 523272 Ongole Andhra Pradesh India

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2023 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
SSSivarao Subramonian
Sivarao Subramonian
Kumaran KadirgamaKumaran Kadirgama
Kumaran Kadirgama
AAAbdulkareem Sh. Mahdi Al-Obaidi
Abdulkareem Sh. Mahdi Al-Obaidi
MSMohd Shukor Salleh
Mohd Shukor Salleh
Umesh Kumar VatesUmesh Kumar Vates
Umesh Kumar Vates
DRDevarajan Ramasamy
Devarajan Ramasamy
This research article presents a comprehensive study on the performance modeling of 3D printed parts using Artificial Neural Networks (ANNs). The aim of this study is to optimize the mechanical properties of 3D printed components through accurate prediction and analysis. The study focuses on the widely employed Fused Deposition Modeling (FDM) technique. The ANN model is trained and validated using experimental data, incorporating input parameters such as temperature, speed, infill direction, and layer thickness to predict mechanical properties including yield stress, Young's modulus, ultimate tensile strength, flexural strength, and elongation at fracture. The results demonstrate the effectiveness of the ANN model with an average error below 10%. The study also reveals the significant impact of process parameters on the mechanical properties of 3D printed parts and highlights the potential for optimizing these parameters to enhance the performance of printed components. The findings of this research contribute to the field of additive manufacturing by providing valuable insights into the optimization of 3D printing processes and facilitating the development of high-performance 3D printed components.

1 January 2020 in Materials Today: Proceedings
Verified
Journal Article
Closed access
PSPujari Satish
Pujari Satish
MKM. Daniel Silas Kumar
M. Daniel Silas Kumar
APA.S. Bhanu Prasanna
A.S. Bhanu Prasanna
CPCh Dilip Sham Prakash
Ch Dilip Sham Prakash

1 January 2024 in Journal of Thermal Engineering
Verified
Journal Article
Open access
PDF file
KVK. P. V. Krishna Varma
K. P. V. Krishna Varma
NNN. S. Naveen
N. S. Naveen
PKP Srinivas Kishore
P Srinivas Kishore
SPSatish Pujari
Satish Pujari
KJKrishna Jogi
Krishna Jogi
VRV. Dhana Raju
V. Dhana Raju
This research work aims to optimize double pipe heat exchanger performance using Taguchi, ANOVA, and ANN. Experimental trials involved varying ferric oxide nanoparticles, cut radius, and volume-based flow rate. Twisted tapes with ratios of 3, 5, and 7 were placed within the tube. Assessed heat transfer characteristics included h, Nu, ff, and thermal performance factor. Taguchi, ANOVA, and ANN optimization techniques were applied to the experimental data. A Taguchi optimization using an L9 orthogonal array focused on input attributes (Vol % of nanoparticles, flow rate, radius of cut), with output attributes being heat transfer co-efficient (h), Nusselt number (Nu), friction factor(ff) and thermal performance factor. Results revealed a notable flow rate effect on enhancing h, Nu, and ff, while the addition of nanoparticles significantly influenced thermal performance. Taguchi and ANOVA were conducted using MINI Tab and ANN was implemented through MATLAB. Test data demonstrated that nanoparticle dispersants in nanofluid significantly improved heat transfer properties, consistent with the noteworthy improvement indicated by optimization techniques. The convective heat transfer coefficient parameter showed improvement with a coolant flow rate of 50.29% and a volume of nanoparticles at 27.32%. The enhancement of Nusselt number (Nu) was influenced by a coolant flow rate of 50.34% and a volume percent of nanoparticles at 34.25%. The thermal performance factor was significantly influenced by the volume percent of nanoparticles (79.75%) and the radius of cut (3.83%).The experimental data aligned well with findings from Taguchi and ANN.

20 June 2023 in Scientia Iranica
Verified
Journal Article
Closed access
PDF file
SPSatish Pujari
Satish Pujari
APAlekya Pilla
Alekya Pilla
SSSivarao Subramonian
Sivarao Subramonian
DMDaniel Silaskumar Mandrumaka
Daniel Silaskumar Mandrumaka
Using a hand lay-up approach, both orange peel and coconut coir fibres are used in particulate form with an epoxy matrix to create partly green biodegradable composites. The findings indicate great opportunities for employing these natural fibres. The thermal conductivity of orange peel and coconut-coir epoxy composites was measured experimentally for various volume fractions of particulate fibres. The experimental findings show that as fibre concentration increases, thermal conductivity decreases. Experimental data are compared to theoretical models to determine the change in thermal conductivity with fibre amount fraction.There was a clear correlation between the hypotheses and the actual results. Regression analysis using Python programming is also done for the prediction of the thermal properties of particulate orange peel and coconut-coir fibre composites. It is observed that coir fibre composites outperformed the orange peel, indicating that the coir fibre composite is a proper thermal insulator that can be used in many industries, like the automotive industry, buildings, and steam pipes, to reduce heat transfer and thereby save a lot of energy.

31 October 2026 in Advances in Science and Technology Research Journal
Verified
Journal Article
Open access
PDF file
SSSivarao Subramonian
Sivarao Subramonian
ABAlax Balan
Alax Balan
Kumaran KadirgamaKumaran Kadirgama
Kumaran Kadirgama
ZKZuhair Khalim
Zuhair Khalim
MSMohd Shukor Salleh
Mohd Shukor Salleh
MAMohamed Kassim Anuar
Mohamed Kassim Anuar
This research aims to develop an intelligent flux monitoring system using fuzzy logic to support continuous flux discharge and assess the operational validity of time-to-empty (TTE) estimation during abnormal flow conditions. The problem addressed is the reduced reliability of conventional...