Aleksandar Jovovic

Aleksandar Jovovic

Auto-generated profile, based on publicly available information

Aleksandar Jovovic

University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2017 in Thermal Science
Verified
Journal Article
Open access
PDF file
DRDejan B. Radić
Dejan B. Radić
MSMiroslav M. Stanojević
Miroslav M. Stanojević
MOMarko O. Obradović
Marko O. Obradović
AJAleksandar M. Jovović
Aleksandar M. Jovović
High-temperature thermal process is a commercial way of regeneration of spent granular activated carbon. The paper presents results of thermal analysis conducted in order to examine high-temperature regeneration of spent activated carbon, produced from coconut shells, previously used in drinking water treatment. Results of performed thermogravimetric analysis, derivative thermogravimetric analysis, and differential thermal analysis, enabled a number of hypotheses to be made about different phases of activated carbon regeneration, values of characteristic parameters during particular process phases, as well as catalytic impact of inorganic materials on development of regeneration process. Samples of activated carbon were heated up to 1000?C in thermogravimetric analyser while maintaining adequate oxidizing or reducing conditions. Based on diagrams of thermal analysis for samples of spent activated carbon, temperature intervals of the first intense mass change phase (180-215?C), maximum of exothermic processes (400-450?C), beginning of the second intense mass change phase (635-700?C), and maximum endothermic processes (800-815?C) were deter-mined. Analysing and comparing the diagrams of thermal analysis for new, previously regenerated and spent activated carbon, hypothesis about physical and chemical transformations of organic and inorganic adsorbate in spent activated carbon are given. Transformation of an organic adsorbate in the pores of activated carbon, results in loss of mass and an exothermic reaction with oxygen in the vapour phase. The reactions of inorganic adsorbate also result the loss of mass of activated carbon during its heating and endothermic reactions of their degradation at high temperatures.

1 January 2011 in Thermal Science
Verified
Journal Article
Open access
DRDejan Radic
Dejan Radic
MOMarko Obradovic
Marko Obradovic
MSMiroslav Stanojevic
Miroslav Stanojevic
AJAleksandar Jovovic
Aleksandar Jovovic
Dragoslava D. StojiljkovićDragoslava D. Stojiljković
Dragoslava D. Stojiljković
Thermal power plants in the Republic of Serbia are making considerable efforts and even more considerable investments, not only to maintain electricity production at maximum design levels, but even to additionally increase the power output of existing generating units. Capacities of mills used in pulverized coal preparation are identified as one of the main constraints to achieving maximum mill plant capacity, while coal grindability is seen as one of the factors that directly affect capacities of the coal mills utilized in thermal power plants. The paper presents results of experimental investigation conducted for the purpose of determining Hardgrove grindability index of coal. The investigation was conducted in accordance with ISO 5074 and included analysis of approximately 70 coal samples taken from the open pit mine of Kolubara coal basin. Research results obtained indicate that coal rich in mineral matter and thus, of lower heating value is characterized by higher grindability index. Therefore, analyses presented in the paper suggest that characteristics of solid fuels analyzed in the research investigation conducted are such that the use coals less rich in mineral matter i. e. coals characterized by lower grindability index will cause coal mills to operate at reduced capacity. This fact should be taken into account when considering a potential for electricity production increase.

10 April 2023 in Environment, Development and Sustainability
Verified
Journal Article
Open access
PDF file
BJBosko Josimovic
Bosko Josimovic
DTDušan Todorović
Dušan Todorović
AJAleksandar Jovović
Aleksandar Jovović
BMBozidar J Manic
Bozidar J Manic
The paper presents a specific method of environmental impact assessment applied in Strategic Environmental Assessment (SEA) for the National Emission Reduction Plan (NERP) in the Republic of Serbia, based on air quality. The specificity of the approach is in the application of a semiquantitative method of multicriteria evaluation based on air dispersion modeling and the integration of SEA goals, indicators and criteria for assessing the impact of the NERP on the quality of air and other environmental elements in this method. When predicting changes in air quality for the planning horizon to 2028, the physical, geographical and climatic characteristics of the area were taken into account, as well as technical measures to reduce SO2 emissions, since this was the dominant pollutant from the Serbian coal-fired power plants studied by the NERP. Air pollution modeling was carried out using the AERMOD software package based on the data collected, and the quantitative results obtained were used in a multicriteria evaluation as part of the SEA. The results of the research indicated the importance of applying this approach in order to significantly increase objectivity in the SEA process, since it is an important element of decision making at the strategic level. In addition, a comparative presentation of the modeling results before and after application of the NERP was an important part of the SEA process, and it provided a clear insight into expected changes in the air quality. This is a key argument for making appropriate policy decisions on spatial, energy, environmental and socio-economic development in the Republic of Serbia, which, like other developing countries, is sluggishly following global trends in energy transition.

1 January 2010 in Chemical Industry and Chemical Engineering Quarterly
Verified
Journal Article
Open access
AJAleksandar Jovovic
Aleksandar Jovovic
ZKZoran Kovacevic
Zoran Kovacevic
DRDejan Radic
Dejan Radic
Dragoslava D. StojiljkovićDragoslava D. Stojiljković
Dragoslava D. Stojiljković
MOMarko Obradovic
Marko Obradovic
MSMiroslav Stanojevic
Miroslav Stanojevic
Co-incineration of wastes started more than 20 years ago. In the last 10 years, the use of alternative fuels in the cement industry is continuously increasing. The use of solid wastes in cement kilns is one of the best technologies for a complete and safe destruction of these wastes, due to the fact that there is a simultaneous benefit of destroying wastes and getting the energy. However, particulate matters (PM) and gaseous chemicals emitted from a source into the environment could be directly transmitted to humans through air inhalation. Therefore, for accurate health risk estimation, the emission of pollutants must be determined. In this work, the analysis of the emission of different pollutants when replacing partially the fuel type used in a cement kiln is done. PM, PM10, heavy metals and inorganic pollutants are analyzed. The methods used for sampling and analysis are the standard methods suggested by the EU regulations for stack analysis. Experimental results have shown the encouraging results: in particular clinker characteristics were unmodified, and stack emissions (NOx, SO2 and CO mainly) were in the case of tires, slightly incremented but remaining almost always below the law imposed limits, and in some cases were even decreased.

1 January 2023 in Thermal Science
Verified
Journal Article
Open access
PDF file
Filip KokaljFilip Kokalj
Filip Kokalj
TZTomas Zadravec
Tomas Zadravec
AJAleksandar M. Jovović
Aleksandar M. Jovović
NSNiko Samec
Niko Samec
Wood biomass fuels have become increasingly important in terms of achieving future sustainability targets regarding RES, especially to reduce GHG and the use of domestic energy sources, on other hand with these fuels the pulutant air emissions have to be addressed with great attention. Nowadays, air staging and flue gas recirculation are often used as a primary emission reduction measure in large scale biomass fuel fired boilers, but their combined application in small scale commercial wood pellet boilers is not so common. The implementation of this approach to the small scale burning devices can enable further development of small boilers, in order to achieve a more complete combustion and reduction of pollutant emissions, especially CO, NOx, and PM. In the presented work a comprehensive numerical and experimental study on the combustion parameters is performed, in order to determine the overall combustion properties. A commercial 32 kW small-scale hot water wood pellet boiler was modified numerically from the operating point of view. The findings of this study, like different combinations of recirculated flue gases and secondary air amount, can serve as useful guidelines for the new innovative design and optimisation of the air and recirculated flue gas injection process parameters. The scenarios of this study, where recirculated flue gas was added to the secondary air, were beneficial. Optimally, a CO reduction of 63% was achieved by adding 30% of recirculated flue gas to the secondary air stream, and a 22% reduction was achieved for the NO emissions.

1 January 2012
Verified
Journal Article
Open access
MZMiodrag Zivotic
Miodrag Zivotic
Dragoslava D. StojiljkovićDragoslava D. Stojiljković
Dragoslava D. Stojiljković
AJAleksandar Jovovic
Aleksandar Jovovic
VCVladica Cudic
Vladica Cudic
In Serbia, the ash from power plants has long been labelled as hazardous waste. With the adoption of the appropriate legislation this ash became secondary raw material with the potential usage. In this paper an analysis of the fly and bottom ash composition, which are disposed of in the power plant ?Nikola Tesla A? landfill, is presented. Thirty samples, divided into three sets, were analyzed for trace elements As, Ba, Be, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Ti, V and Zn. The first and second set of samples were taken at the depth of 0.0-0.6 m, from cassette III, at the place of waste discharge (set I) and in the centre of the cassette (set II).The third set of samples was taken from the same cassette spot but at the different depth. The estimated variations in quality within individual sets, as well as the comparison between sets I and II, were done. The repeatability of results by the depth of cassette (set III) was also analyzed. The mixture consisting of 79.4% limestone, 17% clay, 0.5% sand, 0.55% iron ore, 0.55% from steel mill waste and 2% ash from the thermal power plant "Nikola Tesla A" was adopted as the reputable mixture for cement making. For concrete making, the same cement mixture was used but with 2.1% of the same ash material added. The results showed possibility of further fly and bottom ash use as the cement and concrete material.