Contemporary societies, whether they have reached advanced levels of economic and social development or are still developing, need to prioritise the implementation of circular economy practices. This will facilitate the shift towards regenerative, sustainable, and closed-loop industrial systems. For now, there are some efforts to encourage patterns of production and consumption through changes in economic trends, development of institutional frameworks, harmonising regulations in the field of environmental protection, and raising the level of social awareness to achieve, above all, greater efficiency of resources. Extensive literature that deals with monitoring the implementation of the circular economy already indicates the existence of numerous barriers in this process but also notices some incentives for raising the degree of circularity of the observed systems. In this paper, the question of whether a single value can represent the level of circularity of the chosen material/product chain is researched. An overview of barriers and drivers for implementing circular economy strategies is given to structure a proper metric framework in correlation to the research question. The objective was to simplify the monitoring of circularity by developing a unique index for comparing material/product chains in similar systems. This was accomplished by using the circular material use (CMU) rate introduced in the European Union and modifying it for financial data calculation. As a result, the circular economy index, which covers all 9R strategies (CEI_R), is obtained. The practical verification of model applicability was shown by determining the degree of circularity achieved for passenger cars in the four observed EU countries.

Waste incineration is still an essential technology in the concept of integrated waste management. Most of the combustion residues are incinerator bottom ash. It has been discovered that incinerator bottom ash from the incineration of separated waste in the primary chamber of the modular two-stage incinerator mainly consists of metal oxides, especially SiO₂ and CaO, in proportions that are quite similar to those in cement and so the feasibility of its application as a substitute for cement in concrete was investigated. It was found that after 28 days, the flexural and compressive strengths of the binder using bottom ash were practically comparable with those of a pure cement mixture. The results show that it is reasonable to use a binder containing incinerator bottom ash for applications in which an early-stage lower strength of concrete element is acceptable.

Institute for power, process and environmental engineering, Laboratory for combustion and Environmental engineering, Faculty of Mechanical Engineering, University of Maribor, Republic of Slovenia The combustion process for using municipal solid waste as a fuel within a waste to energy plant calls for a detailed understanding of the following phenomena. Firstly, this process depends on many input parameters such as proximate and ultimate analyses, the season of the year, primary and secondary inlet air velocities and, secondly, on output parameters such as the temperatures or mass-flow rates of the combustible products. The variability and mutual dependence of these parameters can be difficult to manage in practice. Another problem is how these parameters can be tuned to achieving optimal combustible conditions with minimal pollutant emissions, during the plant-design phase. in order to meet these goals, a waste-to-energy plant with bed combustion was investigated by using computational fluid-dynamics approach. The adequate variable input boundary conditions based on the real measurement are used and the whole computational work is updated using real plant geometry and the appropriate turbulence, combustion, or heat transfer models. The operating parameters were optimized on output parameters through a trade-off study. The different operating conditions were varied and the combustible products were predicted and visualized. Finally, the response charts and matrix among the input and output parameters during the optimization process are presented, which monitored the dependence among these parameters.

This paper examines sustainable industrial practices in Serbia, particularly in the mining and energy sector, focusing on the potential of flotation tailings and fly ash, as materials with the largest share in disposed waste in Serbia in 2023 (95%). It highlights the environmental challenges of mining waste and explores innovative approaches to waste management within the circular economy framework. The study analyzes the current state of mining waste in Serbia, particularly in copper mining regions in the east of the country. It discusses the potential for metal recovery from waste and its reuse in various industries. The research also investigates the use of fly ash from thermal power plants as a valuable resource in the construction industry and other sectors. The paper reviews existing initiatives and legislation in Serbia in order to promote sustainable mining practices and waste utilization. By presenting case studies and potential applications, the study demonstrates how implementing circular economy principles in the mining sector can contribute to environmental protection, resource conservation, and economic growth in Serbia. The comprehensive overview of the current state in Serbia provides a solid foundation for establishing a higher degree of circularity in the mining and energy sectors.