10 January 2014 in Optics Express
We demonstrate a 3x1 fiber-based photonic lantern spatial-multiplexer with mode-selectivity greater than 6 dB and transmission loss of less than 0.3 dB. The total insertion loss of the mode-selective multiplexers when coupled to a graded-index few-mode fiber was < 2 dB. These mode multiplexers showed mode-dependent loss below 0.5 dB. To our knowledge these are the lowest insertion and mode-dependent loss devices, which are also fully compatible with conventional few-mode fiber technology and broadband operation.
24 February 2015 in Optics Express
The first realization of a wavelength-selective switch (WSS) with direct integration of few mode fibers (FMF) is fully described. The free-space optics FMF-WSS dynamically steers spectral information-bearing beams containing three spatial modes from an input port to one of nine output ports using a phase spatial light modulator. Sources of mode dependent losses (MDL) are identified, analytically analyzed and experimentally confirmed on account of different modal sensitivities to fiber coupling in imperfect imaging and at spectral channel edges due to mode clipping. These performance impacting effects can be reduced by adhering to provided design guidelines, which scale in support of higher spatial mode counts. The effect on data transmission of cascaded passband filtering and MDL build-up is experimentally investigated in detail.
17 December 2019 in IEEE Electron Device Letters
The design space of ion-implanted moat etch termination in GaN p-n diodes is discussed in this study. Based on experimental data, the design window for ion-implanted moat etch termination has been carefully studied and optimized for vertical GaN p-n diodes grown on bulk GaN substrates. A high-performance diode with a breakdown voltage of 1500 V and a low specific on-state resistance of 0.7 mΩ·cm2 is demonstrated using the optimized edge termination based on moat etch and Mg ion implantation. The p-n diode shows a device figure-of-merit of 3.2 GW/cm2. By using the proposed ion-implanted moat etch termination, GaN diodes with three different drift region designs approach the avalanche breakdown electric field, which indicates the efficacy of the proposed edge termination design and method.