1 October 2023 in Physics of Fluids
The aerodynamic stability of an axial compressor stage depends on the rotor and stator. However, due to the specific design requirements, the evolving flow field and the resulting secondary flow structures are different in both components. This study investigates the evolution of dominant secondary flow structures occurring in the rotor and stator of a tip-critical transonic compressor stage at the near-stall condition using unsteady numerical analysis and validates performance characteristics with the experimental data. The investigation reveals that the presence of rotor tip shock creates a large difference in the pressure gradient across the pressure surface and the suction surface, intensifying tip leakage flow and shock-induced boundary layer separation. The higher incidence angle near the hub leading edge creates a local separation and reattachment zone. The radial pressure gradient causes the low momentum flow from this local separation zone to migrate radially upward. This migrated flow interacts with the tip leakage flow and separated blade boundary layer, eventually creating a colossal recirculation zone and subsequent rotor blockage of around 46%. The increasing streamwise adverse pressure gradient pushes the tip shock upstream, and at the onset of the stall, the flow directly separates from the rotor leading edge avoiding the shock formation. The stator flow field is dominated by the asymmetric hub corner separation induced by the streamwise adverse pressure gradient and the tip corner separation caused by the vortex structures convected downstream from the rotor tip region leading to stator blockage of around 48%. Along with the blade passing frequency, four other dominating frequencies (0.06×BPF, 0.12×BPF, 0.44×BPF, and 0.84×BPF) related to the aerodynamic instabilities are observed at the inception of stall.
26 March 2024 in Defence Science Journal
Numerical investigation of an axial flow rotor is carried out for its performance characterization and aerodynamic behavior during the design and off-design operating conditions. The study focuses on capturing the transonic flow features from the choke point (CP) to the near stall (NS) point in the rotor. This includes the analysis of passage shock structure, its movement in the blade passage with varying back-pressure, shock boundary layer interaction, tip leakage flow structure, and resulting losses. The study is carried out from 60 % to 100 % of the design speed using steady and unsteady RANS simulations. Three turbulence models, namely; SST, k-ε, and Reynolds stress models, are employed. The SST model predicted the closest approximation to the experimental data. The rotor aerodynamic performance is predicted in terms of total pressure ratio, efficiency, and flow contours. Unsteady analysis revealed that the primary and secondary tip leakage vortices, combined with the suction side tip corner separation, are the major instabilities near the stall region.