8 May 2015 in MRS Bulletin
4 January 2023 in IEEE Electron Device Letters
We optimized gallium nitride drift layers for high voltage and low resistance vertical electronic devices by tuning the doping concentration for a given thickness of $5~\mu \text{m}$ . The optimization procedure is based on an empirical mobility model in order to maximize the corresponding device’s power figure-of-merit with respect to the drift layers parameters. We demonstrate quasi-vertical gallium-nitride based avalanche and punch-through pn-diodes grown on sapphire substrates and we compare the results to the theoretical breakdown voltage values as a function of the drift region doping concentration and thickness. We report on a pn-diode with 545 V avalanche breakdown voltage and a specific resistance of 0.34 $\text{m}\Omega $ cm2 resulting in a power figure-of-merit of 874 MW / cm2 and a punch-through pn-diode with 920 V breakdown voltage, specific resistance of 0.57 $\text{m}\Omega $ cm2 resulting in a power figure-of-merit of 1.48 GW / cm2.
19 April 2024 in IEEE Electron Device Letters
AlN-based GaN-channel HEMTs with MOCVD-grown AlGaN/GaN/AlN epistack were realized on AlN substrates, achieving 400 mA/mm current density at $\text{V}_{\text {GS}}=1$ V and 125 V/ $\mu \text{m}$ breakdown voltage ( $\text{V}_{\text {Br}}{)}$ scaling. Unlike for similar AlN-on-SiC devices, the high $\text{V}_{\text {Br}}$ scaling also applies above 1000 V. This is attributed to the significantly reduced AlN-buffer defect density. A record power density of 1.17 GW/cm2 is extracted from a device with 2.2 kV breakdown voltage. High-voltage switching transients at 0.6 A / 464 V off-state voltage show dispersions effects attributed to the AlN-buffer/GaN-channel interface quality.
10 February 2025 in Applied Physics Letters
In this work, we report on the fabrication of all-implanted β-Ga2O3 metal-oxide-semiconductor field-effect transistor (MOSFET) devices on semi-insulating (-201) β-Ga2O3 substrates. Through the use of multiple energy Si+ implantation and subsequent annealing, we were able to achieve high activation efficiencies up to 87% allowing to realize the active transistor channel and Ohmic contact regions with electrical properties comparable to homoepitaxial layers grown by metal-organic chemical vapor deposition. The fabricated β-Ga2O3 MOSFET devices featured excellent current modulation with on/off current ratios up to 109, maximum drain current densities of 180 mA/mm, and specific on-resistances of 1.5 mΩcm2. Furthermore, breakdown measurements in air of the non-field-plated MOSFET devices with a gate-to-drain distance of 2 μm showed a catastrophic breakdown at 332 V, which equals an average breakdown strength of 1.7 MV/cm. The outcome of this work emphasizes the high potential of this all-implantation approach for fabricating high-performing Ga2O3-based electronic devices for next-generation power electronics applications without the need of sophisticated high-quality epitaxial growth.
1 December 2019 in IET Power Electronics
Vertical silicon carbide transistors and lateral gallium nitride (GaN) transistors for power‐electronic applications currently target applications with different voltage and power ratings. Meanwhile, research and development activities continue on vertical GaN transistors and new gallium oxide (Ga 2 O 3 ) transistors. What are their perspectives in the application and how do they compete against each other and against established transistor technologies? This study discusses the specific characteristics of lateral and vertical GaN and Ga 2 O 3 transistors to assess their strengths and weaknesses.