12 September 2019 in IEEE Transactions on Intelligent Transportation Systems
Recent advances in transportation have enabled lane-specific measurements and lane-specific control. This paper makes use of such data to promote energy efficiency of vehicles. In particular, a Multi-Lane Adaptive Cruise Controller (MLACC) is designed which determines the optimal velocity and lane-to-drive in real-time. This cruise controller solves lane-specific optimization problems to compute an instantaneous trip cost for each lane and selects the lane that poses the lowest cost. The optimization tasks incorporate future route data and encompass multiple objectives including safety, energy efficiency and desired velocity tracking. Therefore, they can be treated as distinct Nonlinear Model Predictive Control (NMPC) problems that have to be solved altogether in each sampling time. To handle the computational load of solving multiple NMPCs in real-time, an integration of Newton and Generalized Minimal Residual numerical methods is employed. The proposed MLACC is implemented for a 2013 Toyota Prius and a wide range of simulation studies are performed to examine the controller. Specifically, hardware-in-the-loop experiments are utilized to evaluate the real-time implementability of the controller. In addition, extensive model-in-the-loop simulations are carried out and the results are compared with driver-in-the-loop experiments. Simulation results indicated that speed profiles and lane changes suggested by MLACC yield up to 27% improvement in energy consumption compared to human drivers.
8 August 2018 in Computer-Aided Design and Applications
Computer-Aided Design and Applications is an international journal on the applications of CAD and CAM. It publishes papers in the general domain of CAD plus in emerging fields like bio-CAD, nano-CAD, soft-CAD, garment-CAD, PLM, PDM, CAD data mining, CAD and the internet, CAD education, genetic algorithms and CAD engines. The journal is aimed at all developers and users of CAD technology to ptovide CAD solutions for various stages of design and manufacturing. The journal publishes all about Computer-Aided Design and Computer-Aided technologies.
11 June 2019 in IEEE Transactions on Vehicular Technology
Recent advances in transportation have proved that the use of upcoming trip data in energy management of Plug-in Hybrid Electric Vehicles (PHEVs) is extremely effective in promoting their Fuel Economy (FE). However, traffic mispredictions as well as the additional overhead of processing route data induce challenges in use of such strategy in practice. With this in mind, the present study evaluates practical implementability of a Trip Planning Assisted Energy Management System (TPAEMS). Towards the end, online integration of the TPAEMS with real-time data and also fast implementation of the trip planning algorithm is first outlined. Then, the TPAEMS under consideration is implemented for the Toyota Prius PHEV and its performance is compared to the vehicle's baseline Energy Management System (EMS) through Model-in-the-Loop simulations. In addition, Hardware-in-the-Loop experiments are carried out to evaluate the computational time of the TPAEMS and verify its real-time implementability. Furthermore, the sensitivity of the TPAEMS to traffic mispredictions are studied through a comprehensive sensitivity analysis. In particular, traffic prediction errors are modeled using probabilistic uncertainty modeling and also real-world data. Numerous repeated random samples of uncertainties are utilized to carry out extensive Monte Carlo simulations followed by statistical analyses of the outcomes. Our results indicate that the TPAEMS under consideration is sufficiently fast to be implemented in real-time and exhibits low sensitivity to traffic mispredictions so that it maintains FE gain in real-world scenarios compared to the baseline EMS.
4 August 2020 in IEEE Robotics and Automation Letters
This study introduces a haptic rendering algorithm for simulating surgical bone machining operations. The algorithm is a new variant of the voxmap point-shell method, where the bone and surgical tool geometries are represented by voxels and points, respectively. The algorithm encompasses computationally efficient methods in a data-parallel framework to rapidly query intersecting voxel-point pairs, remove intersected bone voxels to replicate bone removal and compute elemental cutting forces. A new force model is adopted from the composite machining literature to calculate the elemental forces with higher accuracy. The integration of the algorithm with graphics rendering for visuo-haptic simulations is also outlined. The algorithm is benchmarked against state-of-the-art methods and is validated against prior experimental data collected during bone drilling and glenoid reaming trials. The results indicate improvements in computational efficiency and the force/torque prediction accuracy compared to the existing methods, which can be ultimately translated into higher realism in simulating orthopedic procedures.
21 June 2018 in Computer-Aided Design and Applications
As the open standard for parallel programming of heterogeneous systems, OpenCL has been used in this study in the context of a particular and intensive computing task, namely the voxelization of tessellated objects. For this purpose, OpenCL platform has been utilized to develop a parallelized voxelization algorithm that relies on a fast and efficient triangular mesh facet/cube overlapping test. The extensive numerical tests conducted with heterogeneous hardware configurations on geometric objects of varying complexities, mesh/domain sizes, and voxel resolutions suggest that up to 99.6% or 260 times decrease in the computation time can be obtained when GPU- or CPU-based parallelized techniques are used instead of the conventional single-thread CPU approach. Future developments will attempt the integration of the current implementation into a virtual orthopaedic surgery platform.