In this paper, the outer rotor permanent magnet brushless DC motor (BLDC) with halbach magnet array was studied to im-prove the power characteristics of BLDC for drones. First, the BLDC motor applied to the currently commercial drone was se-lected as the target model and improved design was carried out. Spec generation was carried out for target BLDC model and the base model was designed and manufactured. Based on the base model, am improved design was applied using the halbach mag-net array using Response Surface Method (RSM). Applying the halbach magnet array can reduce the leakage flux and improve the efficiency by reducing the iron loss of the motor. In addition, the design for reducing the weight of the motor was carried out using RSM. It was confirmed by Finite Element Analysis (FEA) that the power characteristics of the designed improved model improved compared to the target BLDC model.
In this paper, a 150 W small wind power generator which has a permanent magnet synchronous generator type is proposed with a new straight shape stator and rotor to reduce the cogging torque. The advantages of the proposed structure are introduced through a comparison between the basic and the proposed models. By comparing the pole slot combination of the proposed generator, the combination with optimal cogging torque characteristics was selected. The electromagnetic characteristics of the proposed shape are analyzed for design variables using a finite element analysis of ANSYS 2021 R1 Maxwell. The final model of the proposed structure is designed by considering the cogging torque and electromagnetic characteristics of the generator. The electromagnetic and structural simulations of the final model are performed to satisfy the required performance of the generator and mechanical safety. To verify the FEA results of the final model, a prototype is manufactured, experimented, and compared with the FEA results.
In this paper, a small wind power generator is proposed with a new straight shape stator and rotor. The advantages of the proposed structure are introduced through a comparison between the basic and the proposed models. By comparing the pole slot combination of the proposed generator, the combination with optimal cogging torque characteristics was selected. The electromagnetic characteristics of proposed shape are analyzed for design variables using a finite element analysis (FEA) of ANSYS Maxwell. The final model of the proposed structure is designed by considering cogging torque and the generator electromagnetic characteristics. The electromagnetic and structural simulations of the final model are performed to satisfy the required performance of generator and mechanical safety. To verify the FEA results of the final model, a prototype is manufactured, experimented, and compared with the FEA results.