Carlos Oliveira

Carlos Oliveira

Auto-generated profile, based on publicly available information

Carlos Oliveira

Nottingham School of Art and Design, Nottingham Trent University,Nottingham,United Kingdom

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2019 in Sensors
Verified
Journal Article
Open access
PDF file
PLPasindu Lugoda
Pasindu Lugoda
JCJúlio Costa
Júlio Costa
COCarlos Oliveira
Carlos Oliveira
LGLeonardo García-García
Leonardo García-García
Sanjula WickramasingheSanjula Wickramasinghe
Sanjula Wickramasinghe
Niko MünzenriederNiko Münzenrieder
Niko Münzenrieder
Textiles enhanced with thin-film flexible sensors are well-suited for unobtrusive monitoring of skin parameters due to the sensors’ high conformability. These sensors can be damaged if they are attached to the surface of the textile, also affecting the textiles’ aesthetics and feel. We investigate the effect of embedding flexible temperature sensors within textile yarns, which adds a layer of protection to the sensor. Industrial yarn manufacturing techniques including knit braiding, braiding, and double covering were utilised to identify an appropriate incorporation technique. The thermal time constants recorded by all three sensing yarns was <10 s. Simultaneously, effective sensitivity only decreased by a maximum of 14% compared to the uncovered sensor. This is due to the sensor being positioned within the yarn instead of being in direct contact with the measured surface. These sensor yarns were not affected by bending and produced repeatable measurements. The double covering method was observed to have the least impact on the sensors’ performance due to the yarn’s smaller dimensions. Finally, a sensing yarn was incorporated in an armband and used to measure changes in skin temperature. The demonstrated textile integration techniques for flexible sensors using industrial yarn manufacturing processes enable large-scale smart textile fabrication.

9 March 2020 in Materials
Verified
Journal Article
Open access
PDF file
DHDorothy Anne Hardy
Dorothy Anne Hardy
ZRZahra Rahemtulla
Zahra Rahemtulla
ASAchala Satharasinghe
Achala Satharasinghe
ASArash Moghaddassian Shahidi
Arash Moghaddassian Shahidi
COCarlos Oliveira
Carlos Oliveira
Tilak DiasTilak Dias
Tilak Dias
Electronically active yarn (E-yarn) pioneered by the Advanced Textiles Research Group of Nottingham Trent University contains a fine conductive copper wire soldered onto a package die, micro-electro-mechanical systems device or flexible circuit. The die or circuit is then held within a protective polymer packaging (micro-pod) and the ensemble is inserted into a textile sheath, forming a flexible yarn with electronic functionality such as sensing or illumination. It is vital to be able to wash E-yarns, so that the textiles into which they are incorporated can be treated as normal consumer products. The wash durability of E-yarns is summarized in this publication. Wash tests followed a modified version of BS EN ISO 6330:2012 procedure 4N. It was observed that E-yarns containing only a fine multi-strand copper wire survived 25 cycles of machine washing and line drying; and between 5 and 15 cycles of machine washing followed by tumble-drying. Four out of five temperature sensing E-yarns (crafted with thermistors) and single pairs of LEDs within E-yarns functioned correctly after 25 cycles of machine washing and line drying. E-yarns that required larger micro-pods (i.e., 4 mm diameter or 9 mm length) were less resilient to washing. Only one out of five acoustic sensing E-yarns (4 mm diameter micro-pod) operated correctly after 20 cycles of washing with either line drying or tumble-drying. Creating an E-yarn with an embedded flexible circuit populated with components also required a relatively large micro-pod (diameter 0.93 mm, length 9.23 mm). Only one embedded circuit functioned after 25 cycles of washing and line drying. The tests showed that E-yarns are suitable for inclusion in textiles that require washing, with some limitations when larger micro-pods were used. Reduction in the circuit’s size and therefore the size of the micro-pod, may increase wash resilience.

10 July 2018 in Fibers
Verified
Journal Article
Open access
PDF file
PLPasindu Lugoda
Pasindu Lugoda
Theodore Hughes-RileyTheodore Hughes-Riley
Theodore Hughes-Riley
COCarlos Oliveira
Carlos Oliveira
RMRobert Morris
Robert Morris
Tilak DiasTilak Dias
Tilak Dias
Embedding temperature sensors within textiles provides an easy method for measuring skin temperature. Skin temperature measurements are an important parameter for a variety of health monitoring applications, where changes in temperature can indicate changes in health. This work uses a temperature sensing yarn, which was fully characterized in previous work, to create a series of temperature sensing garments: armbands, a glove, and a sock. The purpose of this work was to develop the design rules for creating temperature sensing garments and to understand the limitations of these devices. Detailed design considerations for all three devices are provided. Experiments were conducted to examine the effects of contact pressure on skin contact temperature measurements using textile-based temperature sensors. The temperature sensing sock was used for a short user trial where the foot skin temperature of five healthy volunteers was monitored under different conditions to identify the limitations of recording textile-based foot skin temperature measurements. The fit of the sock significantly affected the measurements. In some cases, wearing a shoe or walking also heavily influenced the temperature measurements. These variations show that textile-based foot skin temperature measurements may be problematic for applications where small temperature differences need to be measured.

25 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
ZRZahra Rahemtulla
Zahra Rahemtulla
ATAlexander Turner
Alexander Turner
COCarlos Oliveira
Carlos Oliveira
JKJake Kaner
Jake Kaner
Tilak DiasTilak Dias
Tilak Dias
Theodore Hughes-RileyTheodore Hughes-Riley
Theodore Hughes-Riley
Falls can be detrimental to the quality of life of older people, and therefore the ability to detect falls is beneficial, especially if the person is living alone and has injured themselves. In addition, detecting near falls (when a person is imbalanced or stumbles) has the potential to prevent a fall from occurring. This work focused on the design and engineering of a wearable electronic textile device to monitor falls and near-falls and used a machine learning algorithm to assist in the interpretation of the data. A key driver behind the study was to create a comfortable device that people would be willing to wear. A pair of over-socks incorporating a single motion sensing electronic yarn each were designed. The over-socks were used in a trial involving 13 participants. The participants performed three types of activities of daily living (ADLs), three types of falls onto a crash mat, and one type of near-fall. The trail data was visually analyzed for patterns, and a machine learning algorithm was used to classify the data. The developed over-socks combined with the use of a bidirectional long short-term memory (Bi-LSTM) network have been shown to be able to differentiate between three different ADLs and three different falls with an accuracy of 85.7%, ADLs and falls with an accuracy of 99.4%, and ADLs, falls, and stumbles (near-falls) with an accuracy of 94.2%. In addition, results showed that the motion sensing E-yarn only needs to be present in one over-sock.

11 May 2024
Verified
Conference Paper
Open access
Theodore Hughes-RileyTheodore Hughes-Riley
Theodore Hughes-Riley
ASArash Moghaddassian Shahidi
Arash Moghaddassian Shahidi
KMKalana Chanuka Marasinghe
Kalana Chanuka Marasinghe
ZRZahra Rahemtulla
Zahra Rahemtulla
Malindu EhelagastennaMalindu Ehelagastenna
Malindu Ehelagastenna
Tilak DiasTilak Dias
Tilak Dias
Electronic textiles (E-textiles) can act as an exceptional substrate for incorporating sensing devices for monitoring physiological parameters, as they are comfortable to wear close to the skin. This makes them excellent for a variety of applications in the healthcare, wellbeing, and personal protection sectors. One method of creating E-textiles with good textile properties is to integrate an electronic component into a yarn to create an electronic yarn (or E-yarn), which can then be used to construct a textile. This Interactivity Lab Demonstration will present electronic textiles developed by the Advanced Textiles Research Group (ATRG) from Nottingham Trent University (UK). The group has conducted a wealth of research into the development of E-yarns and the incorporation of these into textiles and garment. At CHI, users will be able to interact with textiles capable of fall and near-fall detection, temperature sensing, acoustic sensing, giving haptic feedback, and harvesting solar energy.

23 August 2024 in Sensors
Verified
Journal Article
Open access
PDF file
NPNishadi Perera
Nishadi Perera
ASArash Moghaddassian Shahidi
Arash Moghaddassian Shahidi
KMKalana Chanuka Marasinghe
Kalana Chanuka Marasinghe
JKJake Kaner
Jake Kaner
COCarlos Oliveira
Carlos Oliveira
Theodore Hughes-RileyTheodore Hughes-Riley
Theodore Hughes-Riley
This research investigated the sustainability of textile garments with integrated electronics and their potential impact on the environment. The electronic textiles (E-textiles) sector is booming, with many advancements in E-textile product designs and construction methods having been made in recent years. Although there is a rapidly increasing interest in the reusability and sustainability of textiles, work towards E-textile sustainability requires further attention. Vastly different components are combined when constructing an electronic textile product, which makes it challenging at the end of the life of these products to dispose of them in a responsible way. In this study, a teardown analysis was conducted using a structured method, which first mapped out the interactions between each component of the product with the environment, followed by using Kuusk’s sustainable framework to analyze sustainable strategies. The research provides a unique contribution to transitioning sustainability theories into practical applications in the area of E-textiles, and the method proposed in this work can be employed in modifying electronics-embedded textiles to improve longevity and reduce the negative environmental impact. The work has highlighted key points of improvement that could be applied to a series of commercial E-textile garments, as well as a prototype E-textile device. Beyond this, the work provides a systematic approach for implementing new E-textile product designs that can evaluate overall product sustainability from the design stage to material selection, construction, and the planning of the commercial approaches of a product.