Artificial intelligence- (AI-) empowered machines are devised to mimic human actions. In the automotive industry, AI plays a significant role in the development of vehicular technology. AI joins hands with the field of mechatronics to assist in the accurate execution of the vehicle functionalities. Autonomous vehicles get the scene information by using onboard sensors such as laser, radar, lidar, Global Positioning System (GPS), and vehicular communication networks. The data obtained is then used for various path planning and control techniques to make the vehicles capable of autonomously driving in complex environments. Autonomous vehicles use very up-to-date AI algorithms to localize themselves in known and unknown environments. AI algorithms are also exploited for perception, path planning, and motion control. A concise review of the state-of-the-art techniques to improve the performance of autonomous vehicles is presented.
In order to increase the radiation performance of aperture-type antennas, this paper demonstrates a low-profile, planar, single-layer, three-dimensional (3-D) printable metastructure. The proposed hybridized metastructure is highly transparent as it is made out of novel hybrid meta-atoms having transmission coefficient magnitudes greater than – 0.72 dB and fully complies with the near-field phase transformation principle. The hybridized design approach makes the metastructure planar, low-profile, light in weight, and compatible with additive printing technology. For the proof-of-concept, such metastructure is developed and numerically verified to enhance the radiation performance of a resonant cavity antenna (RCA). With the proposed metastructure, the peak directivity of the RCA is improved by 8.6 dBi (from 11.4 dBi to 20 dBi) at the operating frequency of 12.4 GHz. The aperture efficiency and 3-dB directivity bandwidth of the RCA with the metastructure are 41.46% and 16.5%, respectively. Using readily accessible thermoplastics or polymers and copper with cost-effective fused deposition modeling (FDM) 3-D printing technology, the proposed planar hybridized metastructure can be prototyped commercially.
18 June 2022 in International Journal of Antennas and Propagation
In this paper, a trinotch band MIMO antenna is designed for upper and lower WLAN (5.1GHz, 5.5GHz) i.e., (802.11a/g/n/ac/ax) and satellite X-band (8.5GHz). The placement of closely found notches at 5.1GHz and 5.5GHz is addressed by taking advantage from the placement of the same notch elements at appropriate distances from each other, to split single resonance into biresonances. Similarly, the third notch is produced at 8.5GHz via a U-shaped slot added in the antenna. 2x1-MIMO antenna with notch bands is expected with better isolation by analysis of co-configurations and cross-configurations.
A 3-D printable, planar, metal-dielectric metasurface-based, 2-D beam-steering system for aperture-type antennas is presented in this paper. This beam steering system, also known as the near-field meta-steering system, comprises two fully passive phase-gradient metasurfaces placed in the antenna’s near-field region to steer the radiation beam. To address the non-uniform electric field phase of the aperture antenna, phase correction is also incorporated into the bottom metasurface placed on top of the antenna aperture in its near-field to enhance the far-field radiation of the antenna. Near-field phase transformation and phased array antenna theory concepts are applied to design the proposed metasurfaces. Two types of metal-dielectric unit cells are implemented to provide a phase range of 360°. The height of each metasurface is only 6.25 mm (0.25λ 0 ), and the height of the whole system is only 1.56 λ 0 at 12 GHz. The proposed beam steering system with a resonant cavity antenna can steer the beam to a maximum of ±44° in the elevation plane and 360° in the azimuth plane with only a 1.4 dB deviation in directivity over the full steering range.
20 June 2022 in Wireless Communications and Mobile Computing
Implementation of robust routing is very critical in network communication. Connecting devices like routers maintain databases for the whole network topology in the routing table. Each router needs to keep these tables updated with the best possible routes so that an efficient communication can always take place in nondelay tolerant intelligent networks that include military and tactical systems, vehicular communication networks, underwater acoustic networks, and intelligent sensor networks. The fast construction of shortest-path tree (SPT) is important to devise an efficient routing in a nondelay tolerant networks. That is why a simple and efficient algorithm is the need of the time. A robust routing solution SPT with time complexity is proposed to supersede the existing landmark.
12 May 2025 in Frontiers in Antennas and Propagation
This article introduces a planar, highly transmissive, 3-D printable metastructure with a low profile for enhancing the far-field radiation performance of conventional electromagnetic band-gap (EBG) resonator antennas. The proposed near-field phase transforming metastructure (PTM) is developed by employing the near-field phase transformation approach that transforms the non-uniform phase of a conventional EBG resonator antenna into a nearly uniform one and enhances the far-field radiation pattern. The novelty of this paper lies in reducing the height of the phase-transforming structure compared to state-of-the-art structures with better performance. The metastructure’s low profile is realized by incorporating metal inside the dielectric materials. The proposed PTM comprises two types of unit cells made of metal and dielectric material to achieve a wide range of phase coverage. All the phase transforming unit cells used are highly transmitting as their transmission coefficient is greater than −0.77 dB, which increases the aperture efficiency compared to previous designs. Additionally, the proposed metastructure is fully passive and polarization-independent. To achieve the desired performance, the PTM can be realized by using additive manufacturing technologies and exploiting RF-graded 3-D printing filament. The proposed metastructure-based wide-band EBG resonator antenna achieves a peak directivity, aperture efficiency, and 3 dB directivity bandwidth of 21.4 dBi, 54.65%