This study introduces a monopole 4 × 4 Ultra-Wide-Band (UWB) Multiple-Input Multiple-Output (MIMO) antenna system with a novel structure and outstanding performance. The proposed design has triple-notched characteristics due to CSRR etching and a C-shaped curve. The notching occurs in 4.5 GHz, 5.5 GHz, and 8.8 GHz frequencies in the C-band, WLAN band, and satellite network, respectively. Complementary Split-Ring Resonators (CSRR) are etched at the feed line and ground plane, and a C-shaped curve is used to reduce interference between the ultra-wide band and narrowband. The mutual coupling of CSRR enables the MIMO architecture to achieve high isolation and polarisation diversity. With prototype dimensions of (60.4 × 60.4) mm2, the proposed antenna design is small. The simulated and measured results show good agreement, indicating the effectiveness of the UWB-MIMO antenna for wireless communication and portable systems.
18 June 2022 in International Journal of Antennas and Propagation
In this paper, a trinotch band MIMO antenna is designed for upper and lower WLAN (5.1GHz, 5.5GHz) i.e., (802.11a/g/n/ac/ax) and satellite X-band (8.5GHz). The placement of closely found notches at 5.1GHz and 5.5GHz is addressed by taking advantage from the placement of the same notch elements at appropriate distances from each other, to split single resonance into biresonances. Similarly, the third notch is produced at 8.5GHz via a U-shaped slot added in the antenna. 2x1-MIMO antenna with notch bands is expected with better isolation by analysis of co-configurations and cross-configurations.
The wireless sensor networks (WSNs) lifetime is mainly dependent on the RE of the sensor nodes (SeN). In recent years, energy minimization in a WSN has been a prominent research topic, and numerous solutions have been proposed. This research focuses on the energy minimization of the SeNs where firstly, K-medoid clustering algorithm is applied to create clusters. Second, a weighted cluster head selection technique is used to choose a cluster head (CH) by integrating three independent weights associated with an SeN: energy, distance from the centroid, and distance from the sink node (SN). According to the energy level and distance from the SN and clusters centre, each node is assigned a constant weight. The simulation results are compared to existing methodologies, and the results show that the suggested networks lifetime enhances.
This paper presents the design of an arc-shaped near-isotropic self-complementary antenna for spectrum sensing application. An arc-shaped dipole with horizontal and vertical arms is used to achieve a near isotropic radiation pattern. The radiation pattern improved by adjusting the horizontal and vertical arm lengths. Simulated and experimental results show that the proposed antenna has an impedance bandwidth of 146% (2.4–18.4 GHz) for VSWR ≤ 2 with a good radiation pattern. In order to quantify the antenna performance, antenna gain variation, bandwidth, efficiency, and size have been compared with previously reported designs. It is shown that the proposed arc-shaped antenna can achieve nearly isotropic radiation patterns with a maximum radiation efficiency of 92%. The isotropic performance of the antenna has been characterized by observing the radiation pattern and solid angle. The FR4 substrate is used as a dielectric with relative permittivity 4.4 and loss tangent of 0.02. ( = 4.4, h = 1.6 mm) The simulated and measured results are in good comparison, and the proposed design is a suitable candidate for spectrum sensing.
A novel ultra-wideband (UWB) KAYI-shaped and common KITE-shaped ground plane tri-port antenna is proposed. The proposed research work has a small size of (30 × 30 × 1.6 mm). The MIMO antenna elements are placed in a KAYI-shaped (Y-shaped) with a symmetric phase shift of between the nearby MIMO antennas element improving the isolation. The antenna’s gain is more than 5 dBi for the entire bands of WiMax, WLAN, and X-band satellite communication. The suggested work includes notches at GHz, GHz, and GHz, respectively. The notching characteristics are made possible by L-shaped slits for the WiMax band, the inverted U-shaped slot for WLAN, while the third is created by the interaction between the L-shaped and U-shaped notching elements. Results were measured after making the prototype antenna on the FR-4 substrate. The proposed antenna has good impedance matching for 2–20 GHz and three notching characteristics with high isolation among the MIMO elements. Mean effective gain (MEG), envelope correlation coefficient (ECC), and total active reflection coefficient (TARC) are the diversity metrics of MIMO antennas which are in good comparison to the proposed antenna. The antenna is a good candidate for deployment in wireless communication and MIMO applications.