Jinya Chen

Jinya Chen

Auto-generated profile, based on publicly available information

Jinya Chen

College of Mechanical and Vehicle Engineering, Hunan University, Changsha, CHINA

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 February 2025 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
JWJianbo Wang
Jianbo Wang
Kan LiuKan Liu
Kan Liu
Dong WeiDong Wei
Dong Wei
YCYongdan Chen
Yongdan Chen
JCJinya Chen
Jinya Chen
JZJing Zhou
Jing Zhou
In this article, a multielectrical signal fusion method based on the rotor speed and stator current is investigated for bearing fault diagnosis of permanent magnet synchronous machines (PMSMs) under variable speed conditions. This method can achieve low-cost and real-time fault diagnosis by using directly measured rotor speed and stator current signals from the drive machine of the mechatronics system. First, the fault feature harmonic can be extracted from the rotor speed signal, and the instantaneous phase is estimated using the stator current of PMSMs. The time-domain fault feature harmonic is then resampled on the angle domain using a high-precision accumulative angle calculated by the instantaneous phase. Finally, the fault type can be diagnosed by the fault indicator in the envelope spectrum of the resampled signal. Furthermore, experimental validations are conducted on the PMSM-drive-system-based bearing fault diagnosis platform. The results indicate that the proposed method can accurately extract fault features to diagnose the bearing faults under variable speed conditions without extra sensors.

13 November 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LGLi Gao
Li Gao
Kan LiuKan Liu
Kan Liu
YCYongdan Chen
Yongdan Chen
HLHaozhe Luan
Haozhe Luan
SZShichao Zhou
Shichao Zhou
CHChao Huang
Chao Huang
In this paper, a variable-gain LLC converter with a series-parallel hybrid switch-controlled capacitor (SCC) network is proposed. By tuning the duty cycle of two controlled switches, the resonant capacitance of converter can be regulated and will slightly shift the parameters of resonant tank. Meanwhile, the added switches will be turned on at the zero-crossing point of resonant current to guarantee soft switching. Besides, a mode switching scheme based on the modulation of both switching frequency and capacitance is proposed, by which a group of converter voltage gain curves can be obtained and consequently expands its operation range. In order to verify the effectiveness of proposed design, a 250W prototype converter is designed and tested under different loads and modes. It shows that the proposed design can retain the characteristics of conventional LLC converter, such as soft switching and high efficiency, while it can achieve a wider range of input voltage and a robust control of output voltage against disturbances from input voltage.

15 October 2024 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Dong WeiDong Wei
Dong Wei
Kan LiuKan Liu
Kan Liu
Jing HuangJing Huang
Jing Huang
JWJianbo Wang
Jianbo Wang
SZShichao Zhou
Shichao Zhou
JCJinya Chen
Jinya Chen
Inter-turn short circuit fault is a commonly occurring electrical fault in permanent magnet synchronous machines (PMSMs) with serious consequences. Diagnostic methods under non-stationary operating conditions lie in removing the impact of speed variations, hence the rotational speed signal is essential. In addition, another signal containing the fault feature information is also needed. However, to reduce the amount of data transmitted from the slave device to the host computer, or deal with signal transmission failure and sensor failure to strengthen the reliability, a single signal based diagnostic method is proposed, which only requires any one of the dq-axis signal, speed, or phase current, even under variable speed conditions. The instantaneous phase is estimated using the single signal based on an intrinsic harmonic feature of the tested machine, and angular resampling is then implemented on the signal based on the fault model. The proposed method is eventually tested on a PMSM using dq-axis signal, speed, and phase current, respectively. The results show that the estimation error of the instantaneous phase using any signal is less than 1.13%, and accurate fault feature extraction is achieved under different speed conditions.

15 July 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
JWJianbo Wang
Jianbo Wang
YCYongdan Chen
Yongdan Chen
Kan LiuKan Liu
Kan Liu
Dong WeiDong Wei
Dong Wei
SZShichao Zhou
Shichao Zhou
HCHuaqiang Cai
Huaqiang Cai
This paper proposes a comb filter-based noise cancellation method to mitigate the impact of dominant components and extract fault features in the electrical signals of permanent magnet synchronous machines (PMSMs) for bearing fault diagnosis. The parameters of the comb filter are determined by the rotor speed to effectively eliminate the noise inherent in the electrical signals being analyzed, hence extracting the fault harmonics. The diagnosis of bearing defects is afterward achieved by employing spectrum analysis of the filtered signals. Notably, the proposed method does not necessitate complex signal transformation and decomposition, hence enabling efficient fault diagnosis. The effectiveness of the proposed method is evaluated through signature analysis of rotor speed, currents, and voltage signals in PMSMs that are equipped with three different types of faulty bearings, even under lower rotor speed and load disturbance conditions. Moreover, a comparative analysis conducted between the proposed method and existing solutions reveals its excellent performance in rapidly diagnosing bearing faults.

12 August 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
JCJinya Chen
Jinya Chen
Kan LiuKan Liu
Kan Liu
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
HCHuaqiang Cai
Huaqiang Cai
SZShichao Zhou
Shichao Zhou
DZDinghua Zhang
Dinghua Zhang
In this paper, a torque improvement scheme based on using the combination of main and axial-assisted magnets (AAMs) in rotor is proposed for interior permanent magnet synchronous machines (IPMSMs), which can achieve higher output torque after dimension optimization by both Taguchi iterative optimization method and finite element (FE) analysis. Compared with the conventional IPMSM rotor, this design can achieve higher flux density in the main flux path under the premise of using the same total volume of magnet material, which benefits from the raised working point of permanent magnets (PMs) and reduced PM leakage flux. To verify its effectiveness, the conventional and proposed IPMSM rotors with three types of AAM configurations, i.e. I-shape, V-shape, and U-shape PMs, are fabricated and tested for comparison. It shows that compared with the conventional IPMSM rotor, the proposed scheme can achieve a maximum of 8.0% increase in output torque with a quite slight increase in the torque ripple.

18 February 2025 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
SZShichao Zhou
Shichao Zhou
Kan LiuKan Liu
Kan Liu
YCYongdan Chen
Yongdan Chen
LGLi Gao
Li Gao
BMBo Ma
Bo Ma
BWBisheng Wen
Bisheng Wen
Due to the difference of common-mode voltage (CMV), the zero-sequence circulating current (ZSCC) becomes a major issue in two paralleled voltage source inverters (VSIs) with a common DC bus. To address this challenge, this paper proposes a minimal ZSCC modulation strategy based on the vector redundancy of paralleled system, which theoretically eliminates the excitation source of ZSCC. Given the redundancy of equivalent vectors, the vectors with zero CMV difference are developed to synthesize the command voltage. Each 60° sector of space vector modulation is further segmented into four subsectors. Optimal vector sequences in these subsectors are designed according to the rules of preventing line-to-line voltage reversal and minimizing switching actions. And the implementation of the proposed method is thoroughly investigated including the determination and duty cycle calculation of subsectors. Compared with existing works, the proposed method demonstrates superior performance in suppressing ZSCC. The effectiveness of the proposed method is validated on a test platform fed by two paralleled two-level VSIs.