24 June 2024 in IEEE Transactions on Industrial Informatics
Active magnetic bearing (AMB) is an advanced contactless bearing system for high rotation speed equipment but cannot work stably without closed-loop control. Normally multiple proportional integral derivative (PID) controllers are used to control the multiaxis AMB system. However, existing AMB PID controller tuning methods mainly focus on optimization and cannot turn an AMB system from unstable to stable. In this article, a model-free AMB PID tuning method is proposed to solve this problem for the first time, which imitates an experienced AMB engineer and utilizes physical information from runtime data. The effects of varying PID controller parameters on rotor displacements are analyzed in the time domain and meta-parameters are proposed to describe the parameters' performance. The effectiveness of the proposed tuning method is supported by the time-domain analysis and is also verified through experiments. For an unknown and untuned AMB system, the proposed tuning method provides a parameters solution in a short time with acceptable performance. With the tuned AMB system provided by the proposed tuning method, further works like system identification or optimization can be carried out more easily.
15 May 2023 in IEEE Transactions on Industrial Electronics
Active magnetic bearing (AMB) is a kind of contactless bearing system for high-speed rotational machines. Power electronics converter is the key conversion unit for the electromagnetic force generation. However, there is no such kind of integrated power electronics converter to drive a typical five-axis magnetic bearing by considering the global optimization of power electronics devices. In order to cut the cost and increase the power density of AMB converter, this article analyzes the development status of topology of AMB drive and proposes a novel converter with double five-phase-four-leg topology. The novel converter could control all the ten winding currents of five-axis AMB with only eight switches while the conventional topology needs twenty switches by further utilizing the freedom degree of the AMB control. Also, compared with the conventional topology, the switches of novel topology have same maximum voltage and current. Furthermore, this article proposes the optimized current control methods to minimize the bias current of the active magnetic bearing and applies it to the double five-phase-four-leg topology converter. With the optimized current control, actual current of each coil is decreased and difficulty of thermal design is reduced. The proposed double five-phase-four-leg topology can suspend the five-axis AMB by only using eight switches and eight diodes, which is the minimum compared with the state of the art.
28 August 2023 in IEEE Transactions on Power Electronics
In active magnetic bearing (AMB) system, the demand for reliability has been increasing, especially in high-speed applications. Failure of power electronics devices is one of primary challenges to the reliability. Among them, short-circuit is a typical failure that can lead to sustained overcurrent in the system, posing a severe threat to system stability. However, very few studies have been conducted on switch short-circuit fault-tolerant control in AMB system. Facing this problem, a general fault-tolerant strategy facing switch short-circuit is introduced in this paper. Once the short-circuit happens, the corresponding winding is controlled with constant current mode and the opposite winding is used to undertake dynamic response. The proposed method includes short-circuit failure detection, changes of relationship between leg and winding voltage in modulation, and proper fault-tolerant control based on force equivalence. Fault-tolerant control experiments show the effectiveness of the proposed approach. This approach provides high reliability for AMB system which will keep the rotor stable suspension even with power electronics devices short-circuit failure.
14 January 2025 in IEEE Transactions on Industrial Electronics
Multilevel power conversion technology represents a significant advancement in the field of power electronics, and the active magnetic bearing (AMB) drive is a typical power electronics equipment. This article introduces a novel hybrid neutral point clamped (NPC) multilevel AMB drive that incorporates a flying-capacitor (FC) leg, merging traditional NPC structures with the FC configuration. It upgrades the voltage levels of the magnetic bearing (MB) windings from three to five levels, thereby enhancing the system's voltage capacity and facilitating swifter current response times. Additionally, at the same voltage level, this approach improves the electromagnetic interference (EMI) characteristics of the AMB drive, diminishes current ripple and power loss, and improves the suspension precision of the MB. The efficacy of the proposed topology and its control methods has been rigorously validated on a MB blower experimental platform, demonstrating their practical applicability and performance benefits.
28 May 2025 in IEEE Transactions on Power Electronics
Switch short-circuit failures pose significant reliability challenges to active magnetic bearing (AMB) systems, yet existing fault-tolerant strategies predominantly rely on hardware redundancy with limited control-oriented solutions. This article overturns the conventional assumption that faulty H-bridge loses current controllability. It reveals their retained operational capacity despite compromised force capability. The key innovation lies in identifying freewheeling mode's pivotal role in postfault current dynamics. Via a detailed analysis of faulty circuits, this article defines the boundaries of current change rates and proposes a universal maximal force capacity strategy by optimizing current distribution with variable bias current control. Experimental results confirm the proposed method's effectiveness, offering a more robust solution for switch short-circuit failures.
6 February 2026 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Current sensors, as critical components in active magnetic bearing (AMB) systems, directly determine the accuracy and stability of rotor suspension. However, the large number of sensors required considerably degrades system reliability, while research on current sensor fault detection in AMBs remains scarce. To address this overlooked issue, this paper proposes a fault detection and fault-tolerant control strategy based on multi-sensor information fusion. A bus current sensor is introduced into the improved power amplifier topology to provide redundant information. Fault occurrence is identified by comparing sensor measurements at each switching cycle, and the faulty sensor is located through a modified modulation strategy. Redundant information is then utilized to extract fault features and compensate for offset, gain, and signal loss faults. The proposed strategy applies to both phase current sensors and the bus current sensor, and supports continuous detection and fault tolerance for offset and gain faults after correction, thereby enhancing measurement reliability and accuracy. Experimental validation on a five-degree-of-freedom AMB demonstrates that the proposed method can effectively detect and compensate current sensor faults, ensuring stable rotor suspension.