14 August 2024 in Science Robotics
Wheels have been commonly used for locomotion in mobile robots and transportation systems because of their simple structure and energy efficiency. However, the performance of wheels in overcoming obstacles is limited compared with their advantages in driving on normal flat ground. Here, we present a variable-stiffness wheel inspired by the surface tension of a liquid droplet. In a liquid droplet, as the cohesive force of the outermost liquid molecules increases, the net force pulling the liquid molecules inward also increases. This leads to high surface tension, resulting in the liquid droplet reverting to a circular shape from its distorted shape induced by gravitational forces. Similarly, the shape and stiffness of a wheel were controlled by changing the traction force at the outermost smart chain block. As the tension of the wire spokes connected to each chain block increased, the wheel characteristics reflected those of a general circular-rigid wheel, which has an advantage in high-speed locomotion on normal flat ground. Conversely, the modulus of the wheel decreased as the tension of the wire spoke decreased, and the wheel was easily deformed according to the shape of obstacles. This makes the wheel suitable for overcoming obstacles without requiring complex control or sensing systems. On the basis of this mechanism, a wheel was applied to a two-wheeled wheelchair system weighing 120 kilograms, and the state transition between a circular high-modulus state and a deformable low-modulus state was realized in real time when the wheelchair was driven in an outdoor environment.
6 July 2018 in IEEE Transactions on Magnetics
This paper presents the analyses and experimental results of a single-sided linear induction motor (SLIM) thrust and normal force for the propulsion of semi-high-speed magnetic levitation (maglev) trains. These trains are composed of a levitation system that uses electromagnetic suspension and a propulsion system that uses SLIMs. The propulsion system of maglev trains using SLIMs has better low noise and dynamic characteristics compared with those using rotators. However, it has nonlinear characteristics due to the effect of slip that occur in the secondary eddy-current induction process; the normal force generated by the SLIM can negatively affect the levitation control. Therefore, a new slip-control algorithm is proposed for the safe operation of maglev trains, reflecting the normal force of the motor in propulsion control. First, the SLIM thrust and normal force are analyzed through the finite-element method (FEM) for a precise analysis of the slips. Furthermore, a slip range with a low normal force was derived based on the FEM analysis results, and these results are reflected in the propulsion control algorithm. Finally, the new algorithm was validated by an application to a full-sized testing apparatus.
14 February 2023 in IEEE Access
This paper proposes an electrical parameter estimation method for permanent magnet synchronous motors (PMSMs) considering the voltage source inverter (VSI) nonlinearity. Accurate parameters are essential for high-performance control of PMSMs. Therefore, numerous studies have been conducted to obtain accurate parameters. However, the VSI nonlinearity causes voltage distortion, which causes parameter-estimation errors. To address this problem, this paper presents a solution using the double-frequency double-amplitude (DFDA) injection method based on the high-frequency (HF) injection method. The proposed method is a practical and novel method using simple mathematical calculations that takes into account VSI nonlinearity without using nonlinearity-compensation methods. It increases the accuracy and reduces the resistance-estimation step by simultaneously estimating the stator resistance and inductance. To demonstrate the efficacy and practicability of the proposed method, it was experimentally verified on a 400 W surface-mounted PMSM. The proposed method can simultaneously estimate the stator resistance and inductance with high accuracy within a short time and can, therefore, be applied to PMSM drives in various industries, such as robotics.
27 February 2024 in IEEE Access
Stair climbing is necessary to improve the convenience of electric wheelchairs. An important issue in developing a climbable wheelchair is stability and speed during climbing. In this work, tri-wheel and supporting leg were adopted in the stair climbing method for high speed and stable posture. Based on the mechanical and static analyses of the climbing mechanism, the design method of the wheel cluster system was expressed as equations. These equations were proposed considering the design parameters that ensure the continuity and stability of the climbing motion. Moreover, the collision information between the stairs and the cluster system during the climbing motion was included in those equations. A validation test of the stair climbing mechanism was performed by manufacturing a prototype of 750 ( W ) x 800( D ) x 1,000( H ) mm 3 and 120 kg . The experimental verification proved that the electric wheelchair can stably go up and down the stairs under extreme conditions (stair width = 300 mm , stair height = 180 mm ) at a speed of 10 steps/min.