O crescente interesse mundial na polpa celulósica produzida a partir da madeira de Acacia mearnsii incentiva estudos que comprovem sua propensão e eficiência para esse fim. Dessa forma, o objetivo deste estudo foi avaliar as propriedades físico-químicas da madeira de Acacia mearnsii, bem como avaliar seu desempenho na produção de celulose kraft, sob diferentes condições de cozimento. Amostras de madeiras das áreas de produção de sementes (APS) e clones foram avaliados. A polpação kraft foi realizada com fator H constante (1363) e álcali ativo variando de 14% a 24%. A densidade básica das madeiras de clone e APS não diferiram estatisticamente (0,544 g/cm³). A análise química revelou que o conteúdo médio (clone e APS) de extrativos, lignina e carboidratos foi de 4,67%, 16,66% e 77,02%, respectivamente. A condição de polpação mais eficiente foi obtida com álcali ativo de 14%, número kappa 16 e rendimento depurado de 57%. De acordo com os resultados, a madeira de Acacia mearnsii apresentou grande potencial para ser utilizada como fonte de fibra curta na obtenção de polpa celulósica pelo processo kraft.
The species Euterpe oleracea, commonly known as açaí, produces a fruit whose pulp is extracted and sold throughout Brazil. Its production generates a large volume of waste rich in chemical compounds that can be used as raw material in various industrial segments. In this sense, the extraction of plant nanocellulose has emerged as a suitable alternative to meet current environmental demands for sustainable development. Therefore, the objective of this study was to perform chemical characterization and obtain cellulose nanocrystals (CNC) from the waste generated in the açaí production chain. For the production of nanocellulose, the waste was pretreated with NaClO2 or H2O2, followed by hydrolysis with sulfuric acid (H2SO4). The quantities found for the chemical components in the waste were: 1.5% inorganic compounds, 11.11% total extractives, 25.58% Klason lignin, 62.01% holocellulose, 28.31% alpha-cellulose, and 33.40% hemicelluloses. The pretreatments delignified the material, and acid hydrolysis extracted CNC. The CNC yields from pretreatments with H2O2 and NaClO2, followed by acid hydrolysis, were 58.76% and 0.5%, respectively. The crystallinity index reached 55.31% for the treatment with H2O2. Both pretreatments were effective in delignification and in obtaining nanocellulose, but the hydrolysis conditions in the treatment with NaClO2 should be modified to increase the yield.