Nanoindentation techniques, with high spatial resolution and force sensitivity, have recently been moved into the center of the spotlight for measuring the mechanical properties of biomaterials, especially bridging the scales from the molecular via the cellular and tissue all the way to the organ level, whereas characterizing soft biomaterials, especially down to biomolecules, is fraught with more pitfalls compared with the hard biomaterials. In this review we detail the constitutive behavior of soft biomaterials under nanoindentation (including AFM) and present the characteristics of experimental aspects in detail, such as the adaption of instrumentation and indentation response of soft biomaterials. We further show some applications, and discuss the challenges and perspectives related to nanoindentation of soft biomaterials, a technique that can pinpoint the mechanical properties of soft biomaterials for the scale-span is far-reaching for understanding biomechanics and mechanobiology.
1 June 2018 in Journal of the Mechanical Behavior of Biomedical Materials
SiCp/6061Al composites have been developed and widely applied in many fields, such as automobile, aerospace, shipping, and so on. Considering heat treatment, service environment, and strength of composites, this paper comprehensively studies the mechanical properties of SiCp/6061Al composites with a large range of SiC mass fractions under T6 treatments and different tensile temperatures. SiCp/6061Al composites were successfully prepared by hot press sintering at various SiC mass fractions (0–30%), and the influences of SiC concentration and T6 treatment on the mechanical properties of composites were characterized via tensile tests at room temperature, 100, and 200 °C. Microstructure and fracture surfaces of composites with various SiC concentrations were further analyzed by optical microscope and SEM. The formula for the biggest critical reinforcement concentration for the saturated distribution of SiC is proposed to reveal the strengthening rule of different SiC concentrations. Results show that the effect of T6 treatment on the mechanical properties of composites is a marked increase in tensile strength and an obvious decrease in elongation. The increase in the SiC mass fraction, except at 30%, is able to bring an increase in tensile strength and a decrease in elongation, and the change of the elongation is insignification in T6-treated specimens. The tensile strength of T6-treated specimens decreases as temperature increases, and the composite has a maximum elongation at 100 °C.
Imaging neural activities across large volumes at subcellular resolution without impeding animal behaviors remains difficult. Here, we develop a high-throughput miniature Bessel-beam two-photon microscope (miniBB2p) capable of imaging calcium dynamics from neurons and dendrites over a volume of 420 × 420 × 80 μm³ during free behavior. We share a full description of miniBB2p and demonstrate its ability to perform large-scale recordings of the calcium activities of more than 1000 neurons at a time in anterior cingulate cortex and secondary motor cortex of freely moving mice in various behavioral paradigms. Our results position miniBB2p to advance the design of miniature multiphoton microscopes, facilitating precise monitoring of neural activities across large populations within a three-dimensional volume in freely moving animals.
Research on the mechanical properties of brain tissue has received extensive attention. However, most of the current studies have been conducted at the phenomenological level. In this study, the indentation method was used to explore the difference in local mechanical properties among different regions of the porcine cerebral cortex. Further, hematoxylin-eosin and immunofluorescence staining methods were used to determine the correlation between the cellular density at different test points and mechanical properties of the porcine cerebral cortex. The frontal lobe exhibited the strongest viscosity. The temporal lobe displayed the lowest sensitivity to changes in the indentation speed, and the occipital lobe exhibited the highest shear modulus. Additionally, the shear modulus of different areas of the cerebral cortex was negatively correlated with the total number of local cells per unit area and positively correlated with the number of neuronal cell bodies per unit area. Exploration of the mechanical properties of the local brain tissue can provide basic data for the establishment of a finite element model of the brain and mechanical referential information for the implantation position of brain chips.