Guram Chlachidze

Guram Chlachidze

Auto-generated profile, based on publicly available information

Guram Chlachidze

Fermi National Accelerator Laboratory, Batavia, IL, USA

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 January 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
PFPaolo Ferracin
Paolo Ferracin
GAGiorgio Ambrosio
Giorgio Ambrosio
MAMichael Anerella
Michael Anerella
HBHugues Bajas
Hugues Bajas
MBMarta Bajkó
Marta Bajkó
MYMiao Yu
Miao Yu
Among the components to be upgraded in LHC interaction regions for the HiLumi-LHC projects are the inner triplet (or low-β) quadrupole magnets, denoted as Q1, Q2a, Q2b, and Q3. The new quadrupole magnets, called MQXF, are based on Nb 3 Sn superconducting magnet technology and operate at a gradient of 132.6 T/m, with a conductor peak field of 11.4 T. Q1 and Q3 are composed of magnets (called MQXFA) fabricated by the U.S. Accelerator Upgrade Project (AUP), with a magnetic length of 4.2 m. Q2a and Q2b consist of magnets (called MQXFB) fabricated by CERN, with a magnetic length of 7.15 m. After a series of short models, constructed in close collaboration by the US and CERN, the development program is now entering in the prototyping phase, with CERN on one side and BNL, FNAL, and LBNL on the other side assembling and testing their first long magnets We provide in this paper a description of the status of the MQXF program, with a summary of the short model test results, including quench performance, and mechanics, and an update on the fabrication, assembly, and test of the long prototypes.

10 February 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
AZAlexander Zlobin
Alexander Zlobin
INIgor Novitski
Igor Novitski
EBEmanuela Barzi
Emanuela Barzi
VKVadim V. Kashikhin
Vadim V. Kashikhin
JCJustin Carmichael
Justin Carmichael
DTDaniele Turrioni
Daniele Turrioni
Fermilab in the framework of the U.S. Magnet Development Program (MDP) has developed a Nb 3 Sn dipole demonstrator for a post-LHC hadron collider. The magnet uses 60-mm aperture 4-layer shell-type graded coils. The cable in the two innermost layers has 28 strands 1.0 mm in diameter and the cable in the two outermost layers has 40 strands 0.7 mm in diameter. An innovative mechanical structure based on aluminum I-clamps and a thick stainless steel skin is used to preload Nb 3 Sn coils and support large Lorentz forces. The maximum field for this magnet is limited by 15 T due to mechanical considerations. The first magnet assembly was done with lower coil pre-load to achieve 14 T and minimize the risk of coil damage during assembly. This paper describes the magnet design and the details of its assembly procedure, and reports the results of its cold tests.

16 November 2016 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
GCGuram Chlachidze
Guram Chlachidze
GAGiorgio Ambrosio
Giorgio Ambrosio
MAMichael Anerella
Michael Anerella
RBRodger Bossert
Rodger Bossert
ECEugenio Cavanna
Eugenio Cavanna
MYMiao Yu
Miao Yu
The U.S. LHC Accelerator Research Program (LARP) and CERN combined their efforts in developing Nb3Sn magnets for the high-luminosity LHC upgrade. The ultimate goal of this collaboration is to fabricate large aperture Nb 3 Sn quadrupoles for the LHC interaction regions. These magnets will replace the present 70-mm-aperture NbTi quadrupole triplets for expected increase of the LHC peak luminosity up to 5 × 10 34 cm -2 s -1 or more. Over the past decade, LARP successfully fabricated and tested short and long models of 90 and 120-mm-aperture Nb3Sn quadrupoles. Recently, the first short model of 150-mm-diameter quadrupole MQXFS was built with coils fabricated both by LARP and CERN. The magnet performance was tested at Fermilab's vertical magnet test facility. This paper reports the test results, including the quench training at 1.9 K, ramp rate and temperature dependence, as well as protection heater studies.

12 December 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
SSStoyan Stoynev
Stoyan Stoynev
GAGiorgio Ambrosio
Giorgio Ambrosio
MAMichael Anerella
Michael Anerella
RBRodger Bossert
Rodger Bossert
ECEugenio Cavanna
Eugenio Cavanna
MYMiao Yu
Miao Yu
The development of Nb3Sn quadrupole magnets for the High-Luminosity LHC upgrade is a joint venture between the US LHC Accelerator Research Program (LARP)* and CERN with the goal of fabricating large aperture quadrupoles for the LHC interaction regions (IR). The inner triplet (low-$\beta$) NbTi quadrupoles in the IR will be replaced by the stronger Nb3Sn magnets boosting the LHC program of having 10-fold increase in integrated luminosity after the foreseen upgrades. Previously LARP conducted successful tests of short and long models with up to 120 mm aperture. The first short 150 mm aperture quadrupole model MQXFS1 was assembled with coils fabricated by both CERN and LARP. The magnet demonstrated strong performance at the Fermilab's vertical magnet test facility reaching the LHC operating limits. This paper reports the latest results from MQXFS1 tests with changed pre-stress levels. The overall magnet performance, including quench training and memory, ramp rate and temperature dependence, is also summarized. * The US contributions to the HL-LHC upgrade will be under the US HL-LHC Accelerator Upgrade Project (US HL-LHC AUP)

10 February 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GAGiorgio Ambrosio
Giorgio Ambrosio
KAKathleen Amm
Kathleen Amm
MAMichael Anerella
Michael Anerella
GAGiorgio Apollinari
Giorgio Apollinari
MBMaria Baldini
Maria Baldini
MYMiao Yu
Miao Yu
With the successful test of the first two pre-series magnets the US HL-LHC Accelerator Upgrade Project has started production of the MQXFA magnets to be used in Q1/Q3 inner triplet elements of the HL-LHC. This good start comes after the test of two prototypes with limited performance, and it demonstrates the importance of learning from past issues. Therefore, in this paper we want to share the most important lessons learned so far, focusing on those which may be more interesting for similar projects. We will also present the status of MQXFA fabrication in the US.

5 February 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
SBSusana Izquierdo Bermudez
Susana Izquierdo Bermudez
GAG. Ambrosio
G. Ambrosio
HBHugues Bajas
Hugues Bajas
NBNicolas Bourcey
Nicolas Bourcey
GCGuram Chlachidze
Guram Chlachidze
GVGiorgio Vallone
Giorgio Vallone
In the framework of the high-luminosity upgrade of the Large Hadron Collider, the U.S. LARP collaboration and CERN are jointly developing a 150 mm aperture Nb3Sn quadrupole for the LHC interaction regions. Due to the large stored energy density and the low copper stabilizer section, the quench protection of these magnets is particularly challenging, relying on a combination of quench heaters attached to the coil surface and coupling loss induced quench (CLIQ) units electrically connected to the coils. This paper summarizes the performance of the quench heater strips in different configurations relevant to machine operation. The analysis is focused on the inner layer quench heaters, where several heater strips failed during powering tests. Failure modes are discussed in order to address the technology issues and provide guidance for future tests.